Just Laser Just Mark 4.2

JustLaser JustMark 4.2

Godina proizvodnje: 2012, stanje: dobar (rabljeno), Robot 40 RC 200 X= 700mm Y= tandem 1600mm Z= 3320mm B + C servo godina proizvodnje. 2012. Cijena: 8.900 € Kontakt: g. Rainer Eckerle Hodpfx Aegkvtxepdonr

Stanje: spreman za upotrebu (rabljeno), Godina proizvodnje: 2018, stezna sila: 400 kN, promjer vijka: 30 mm, masa ubrizgavanja: 79 g, Hidraulički stroj za brizganje plastike proizveden 2018. godine. Ovaj Arburg ALLROUNDER 270 S 400-100 ima maksimalnu silu stezanja od 400 kN i nudi opcije promjera vijka od 15 mm, 20 mm ili 30 mm. Ima maksimalni tlak ubrizgavanja od 2500 bara za manje vijke i maksimalnu težinu ubrizgavanja od 79 g za najveće. Ako tražite visokokvalitetne mogućnosti brizganja plastike, razmislite o stroju Arburg ALLROUNDER 270 S 400-100 koji imamo na prodaju. Kontaktirajte nas za više informacija. • Razmak veznih šipki: 270 mm Hjdpjy Nkwlefx Apdsnr • Jedinica za ubrizgavanje: veličina 100 (prema EUROMAP-u) • Radni sati: 4.261 h (automatski) • Opcije promjera vijka: 15 / 20 / 30 mm • Maks. radni volumen: 18 cm³ (15 mm), 31 cm³ (20 mm), 71 cm³ (30 mm) • Maks. težina zrna (pri 1,15 g/cm³): 20 g (15 mm), 35 g (20 mm), 79 g (30 mm) • Maks. tlak ubrizgavanja: 2500 bara (15/20 mm), 1390 bara (30 mm) • Promjer centriranja: 125 mm • Kapacitet vakuumske pumpe: cca. 25 m³/h • Pneumatski protok: 1000 l/min po krugu • Snaga grijanja po upravljačkom krugu: 3,6 kW / 230 V (osigurač 16 A) • Napon pogonskog motora: 380–480 V (50–60 Hz)

Stanje: vrlo dobro (rabljeno), Godina proizvodnje: 2021, Engel Victory 2460/260 Tech Ecodrive with Engel Viper 20 Robot / Hybrid Machine / Operating hours: approx. 10,000 h in automatic mode Year of manufacture: 2021 Injection Unit: Screw diameter: 70 mm Shot weight: approx. 1100 g Injection pressure: 2000 bar Dosage volume: 1212 ccm Clamping Unit: Clamping force: 260 t Tie bar spacing: 0x0 mm Platen size: 1100x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - Touchscreen Additional equipment: Production line with Engel Viper 20 robot Machine in perfect technical condition Tie-bar-less hybrid machine: energy-efficient and very quiet Operating hours: approx. 10,000 in automatic mode Air valve x 5 Hydraulic core pull x 2 on the moving platen side Hydraulic core pull x 2 on the fixed platen side Injection unit is wear-resistant and corrosion-proof Main motor of the machine – servo motor with inverter drive – energy saving Proportional valve on the injection unit – precise injection Kistler sensor – tool pressure regulation Engel Viper 20 Robot Year of manufacture: 2021 6-axis robot: 6 axes driven by servo motors (electric): X, Y, Z, B, C Touch control panel Hedpfx Apozc N Alodjnr Robot safety package Robot with adapter, conveyor belt, and safety enclosure Purchase of the robot and conveyor belt at extra cost Dimensions: Weight: 21,000 kg Length/Width/Height: 7.35x2.06x2.37 m All machines offered are started up by our service technicians before sale. It is possible to provide a video of the technical tests of the selected machine or to participate in live technical tests at our site in Łódź. Price: On request

Stanje: novo, Godina proizvodnje: 2024, broj stroja/vozila: BN20XS "Standard", duljina osovine: 1.064 mm, masa obratka (maks.): 5 kg, ulazni napon: 230 V, vrsta ulazne struje: Klima uređaj, snaga lasera: 20 W, vrsta hlađenja: zrak, ukupna širina: 400 mm, ukupna visina: 500 mm, ukupna duljina: 600 mm, radni raspon: 70 mm, ukupna masa: 30 kg, trajanje jamstva: 12 mjeseci, vrsta podešavanja visine: električni, maksimalna debljina aluminijskog lima: 3 mm, širina otvora vrata: 400 mm, visina otvora vrata: 350 mm, pomak osi Z: 100 mm, JEWELliner "XS2" model: "Standard" with 20W CW laser output. - Verified design and manufacture in Germany - Additional models, laser power levels, and options available on request. Engraving laser – Labelling laser – Marking laser with "Laser Class 1" protective housing. Our JEWELliner "XS2" marking laser is suitable for engraving and marking all metals, selected plastics, and ceramics. The compact housing measures L50xW40xH50 cm, enabling space-saving integration into your production environment. Applications: Jewellery, metal, and promotional industries Material examples: steel, stainless steel, gold, silver, titanium, aluminium, brass, copper, bronze, carbon, ceramics, Makrolon Hnsdpfx Apsppxlmsdjr Application options: - Graphic engraving (logos, drawings, hand sketches) - Photo engraving - Barcode marking (barcode, datamatrix, QR code) - Serial number engraving - Optional ring internal engraving (e.g. name, date, symbol, handwriting) – optional - Optional ring external engraving (e.g. name, continuous graphics, endless patterns) – optional - Optional bangle internal and/or external engraving – optional - Text engraving (straight text, circular text, curved text, text symbols) - Handwriting engraving - Fingerprint engraving - Micro engraving (microtext with minimum height of 0.15 mm) - Optional rotary engraving (marking on round or curved surfaces) – optional Compact design, all components built into the housing with adequate air-cooling! The machine is maintenance-free! JEWELliner "XS2" (BN20XS2-HR) standard equipment: - Fiber laser unit with beam deflection head and focusing module - Laser Class 1 protective housing with 140x100 mm viewing window - Manual door operation - Emergency stop switch - 180° view of marking area within the housing - Electrically adjustable Z-axis - Marking software included (configurable) - Rotary/rotation axis included Technical specifications/data: Laser type: Fiber laser Continuous output: 20W Available frequency range: 28–64kHz Connection type: USB 2.0 Wavelength: 1064nm Objective (delivery): F-Theta 163 Marking area size: 70 x 70 mm (smaller possible) Focusing range: approx. 1.0 mm Min. character height: 0.15 mm Min. line width: 0.020 mm Cooling: air cooled Maintenance: maintenance-free Power supply: AC 110V/240V – 50/60Hz, short-circuit proof Dimensions: L500 x W400 x H500 mm Weight: approx. 30 kg The marking laser is ready for operation immediately upon delivery and can be quickly integrated into your production process. Sample engravings available upon request. Images and illustrations may differ from actual product.

Stanje: vrlo dobro (rabljeno), Godina proizvodnje: 2022, Funkcionalnost: potpuno funkcionalan, snaga lasera: 30 W, vrsta hlađenja: zrak, ukupna širina: 404 mm, ukupna visina: 590 mm, ukupna duljina: 556 mm, ukupna masa: 35 kg, visina stola: 100 mm, duljina stola: 350 mm, širina stola: 170 mm, potrebna širina: 404 mm, potrebna visina: 590 mm, radna visina: 100 mm, potreban prostor duljina: 556 mm, radna širina: 350 mm, Profesionalni stroj za lasersko graviranje Magic L3 30W – idealna prilika! Prodajemo naš visokokvalitetni stroj za lasersko graviranje Magic L3 s 30W laserskim izvorom vlakana. TEHNIČKE KARAKTERISTIKE: • Model: Magic L3 30W (Red Technology) • Vrsta lasera: 30W laserski izvor vlakana (Fiber) • Nova cijena: 15.490 EUR (vidi stranicu proizvođača) • Radna površina: 350 x 100 x 170 mm (Š x V x D) • Brzina graviranja: do 4000 mm/s • Dimenzije: 556 x 404 x 590 mm • Težina: cca 35 kg ✅ STANJE I UPOTREBA: • Razdoblje korištenja: veljača 2022. – rujan 2025. • Minimalna upotreba: korišten samo nekoliko puta dnevno, tijekom kratkog vremena • NEMA dugotrajnog industrijskog opterećenja! • Izvrsno održavan i potpuno funkcionalan • Automatski zaštitni poklopac radi besprijekorno • Adaptivni sustav hlađenja radi tiho i pouzdano IDEALAN ZA: Hnsdsznnctspfx Apder • Draguljare i zlatare • Graviranje na zlatu, srebru, nehrđajućem čeliku, aluminiju, mesingu • Različite tehnike graviranja: ispunjavanje, obris, potamnjivanje • Serijski brojevi, logotipi, tekstovi, grafika SADRŽAJ PAKETA: • Stroj za lasersko graviranje Magic L3 • Softver MagicArt 7 (jednostavno korištenje!) • Originalna dodatna oprema • Dodatna oprema dostupna (vidi moje druge oglase) ⭐ POSEBNE KARAKTERISTIKE: • Automatski zaštitni poklopac (zatvara se tijekom laserskog rada) • Dostupan priključak za sustav za usisavanje • Podržava formate DXF, PLT, SVG, DGN, JPEG, PNG, BMP • Automatska generacija brojeva za serije • Vrlo malo zahtjeva za održavanjem i dug vijek trajanja • Mogućnost njemačkog sučelja softvera CIJENA: 8999 EUR (po dogovoru) Poštena ponuda za profesionalni uređaj u vrhunskom stanju! KONTAKT I PREGLED: • Mogućnost pregleda i demonstracije uz prethodni dogovor • Moguće preuzimanje / slanje uz dogovor • PDV može biti prikazan na zahtjev Ako ste zainteresirani ili imate pitanja, slobodno se javite! Ključne riječi: lasersko graviranje, laserski izvor vlakana, Fiber Laser, stroj za graviranje, draguljar, zlatar, graviranje nakita, graviranje metala, Red Technology, Ingraser, laserski uređaj za označavanje

Stanje: novo, Godina proizvodnje: 2025, Funkcionalnost: potpuno funkcionalan, duljina osovine: 1.064 mm, masa obratka (maks.): 100 kg, ulazni napon: 230 V, vrsta ulazne struje: Klima uređaj, snaga lasera: 60 W, vrsta hlađenja: zrak, ukupna masa: 135 kg, trajanje jamstva: 12 mjeseci, vrsta podešavanja visine: električni, duljina područja skeniranja: 220 mm, širina područja skeniranja: 220 mm, udaljenost pomaka osi X: 300 mm, Gravis Fiber Laser – Industrial Marking Laser Made in Germany | Automated & PLC-Controlled The Gravis Fiber Laser is an industrial laser marking system for metal, plastics, nameplates, and serial numbers. Developed and manufactured in Germany, it combines maximum precision, rugged mechanics, and flexible PLC control for round-the-clock production use. Technical Features • Power output: 20 – 100 W • Galvo system with precise F-Theta lens • Work area: variable (100×100 mm to 300×300 mm) • Integrated PLC with TCP/IP communication • Flexible software solution: LightBurn / EZCAD / Beam Construct • CE-certified, low-maintenance, ready-to-use immediately ⸻ Advantages Hedpfx Apsxvtt Hjdsnr • Complete system "Made in Germany" – direct from the manufacturer • Custom machine building & automation according to customer requirements • Integration into production lines (e.g., PLC or robot systems) • Outstanding engraving results on stainless steel, aluminum, brass, plastic, tool steel, and more • German support, training & spare parts supply Delivery & Support • Delivery time: 4 – 6 weeks • Delivery, installation, and commissioning across Europe • Lifetime after-sales support Typical Applications • Serial number and nameplate marking • Barcodes, QR codes, DataMatrix • Tool and automotive industry • Electronics, plastics engineering, promotional products • Jewelry engraving, precision mechanics, contract marking

Stanje: novo, Godina proizvodnje: 2025, Dimenzije (dužina/širina/visina) 312x410x739 mm Težina 90 kg Ukupna potrebna snaga 2 kW Stroj za lasersko označavanje vlaknima LASERMAX FL 30 - Radna veličina 200 x 200 mm - Podešavanje visine stola 308 mm - Brzina graviranja 7000 mm/s - Dubina označavanja max. 0,3 mm - Širina linije min. 0,01 mm - Slovo min. 0,05 mm - Ponovljivost +/- 0,001 mm - Laserski modul Maxphotonics, vijek trajanja cca. 100.000 sati - 1 godina garancije na laser - Snaga lasera 30 W (zračno hlađen) - Valna duljina 1064 nm - Frekvencija < 100 kHz - Zračno hlađenje - Napon 230 V / 50 Hz - Potrošnja 2000 W - Dimenzije D=312 mm, Š=410 mm, V=739 mm - Težina 90 kg Hnedpfxovz Hh Ss Apdor