RS Oils

Stanje: novo, Godina proizvodnje: 2020, Funkcionalnost: potpuno funkcionalan, Oprema: dokumentacija / priručnik, Proizvođač: BRINOX Process Systems Tip: LEP 2.3 Vrsta postrojenja: Temperirajuća jedinica za otopine za pranje i eluaciju Godina proizvodnje: 2020 Serijski broj: 1003563 Broj uređaja: KK6752 Izvedba: Skid od nehrđajućeg čelika, farmaceutska konstrukcija LEP 2.3 KK6752 Paket 7 Tehnički podaci Izvedba: Kompaktna, prethodno montirana temperirajuća jedinica na zavarenom okviru od nehrđajućeg čelika (skid-sustav) Dksdpfjyl Ipcjx Aifsl Materijali: Dijelovi u kontaktu s proizvodom: Nehrđajući čelik 1.4435 / 1.4404 Dijelovi bez kontakta s proizvodom: Nehrđajući čelik 1.4301 Cjevovodni sustav: Orbitalno zavarivanje (prikladno za farmaciju) Potpuno zavarena izvedba Isometrija "as-built" dostupna Tlačni podaci: Testiranje nepropusnosti sa stlačenim zrakom Ispitni tlak: 3,37 bar Vrijeme držanja: 1 sat Rezultat: Bez curenja Mjerna i regulacijska tehnika: Mjerenje tlaka (PIR, PI, PIRC) Mjerenje temperature (TI, TIRC) Mjerenje razine (granična vrijednost) Nadzor protoka Povratne informacije o položaju Upravljanje motorom Pneumatski On/Off ventili Mjerno područje senzora tlaka: 0–10 bar Električni priključak: Upravljački zrak: 6 bar Automatizacija moguća (PLT točke u potpunosti dokumentirane) Glavne komponente: 2 procesne pumpe Pločasti izmjenjivač topline Rebrasti cijevni izmjenjivač topline Ekspanzijska posuda Više higijenskih regulacijskih i zapornih ventila Integrirane mjerne jedinice Rashladni medij: Rashladna salamura (priključci za polaz/povrat dostupni) ───── Dimenzije / Težina Oblik: Kompaktna skid-jedinica Industrijska izvedba za čiste prostorije/tehnička područja (Prijevozno i montažno mjere prema nacrtu izrade) Područje primjene Temperiranje: Otopina za pranje Eluacijskih otopina Procesnih medija u biofarmaceutskom okruženju Područje upotrebe: Biotehnologija Frakcioniranje plazme GMP proizvodni pogoni Izgradnja / Konstrukcija Zavareni okvir od nehrđajućeg čelika Montaža pumpi s niskim vibracijama Higijenska izvedba cjevovoda Potpuna implementacija prema P&ID Jasno odvojeni produktni i ne-produktni dijelovi Provjeren pristup za servis i održavanje SAT-IQ mehaničko testiranje provedeno SAT-IQ mjerno testiranje provedeno P&ID dijagram provjeren Nacrt izrade provjeren Stanje Godina proizvodnje 2020 Industrijska i farmaceutska izvedba Novo, originalno zapakirano Tlačno testirano Senzori kalibrirani FAT proveden FAT / Dokumentacija Dostupno: FAT plan i izvješće Upravljanje odstupanjima Provjera nacrta P&ID provjera Test nepropusnosti Kalibracija senzora Servisna i pristupna provjera EN10204 tvornička potvrda Liste materijala (LBM) As-built isometrija Popisi komponenata (uređaji i PLT točke) Posebne značajke Izvedba pogodna za Pharma-GMP Kompletna validacijska dokumentacija Potpuna sljedivost Certificirano tlačno ispitivanje Certifikati o kalibraciji akreditiranih laboratorija Vrhunska izrada sustava od BRINOX-a High-end standard za biofarmaceutiku

Stanje: novo, Godina proizvodnje: 2020, Funkcionalnost: potpuno funkcionalan, Oprema: dokumentacija / priručnik, Proizvođač: BRINOX Tip: LEP 2.3 – jedinica za temperaturno kondicioniranje otopine za pranje Godina proizvodnje: 2020 Serijski broj: 1003561 Oznaka uređaja: MR-INH-VPR61-KK6751 Dkjdpfx Ajyl Ib Esifsl Broj opreme: 20022779 Lokacija: Njemačka Stanje: Novo, nekorišteno, originalno zapakirano Tehnički podaci Vrsta postrojenja: Jedinica za temperaturno upravljanje otopinom za pranje (temperaturni skid) Izvedba: Kompaktna, prethodno montirana skid-jedinica u okviru od nehrđajućeg čelika Materijal okvira: Nehrđajući čelik Izolacija: Potpuno izolirane cijevi i komponente Crpke: Dvije cirkulacijske crpke s elektromotorom Kućišta crpki od nehrđajućeg čelika Inline izvedba Izmjenjivač topline: Izmjenjivač topline od nehrđajućeg čelika, integriran Izvedba s cijevnim snopom ili plaštenim cijevima Armature: Više GEMÜ kuglastih ventila Ventili od nehrđajućeg čelika Pneumatski regulacijski ventili Sigurnosni ventili Mjerni instrumenti: Tlačni predajnici Manometri Mjesta za mjerenje temperature Integrirano mjerenje protoka Elektrika: Integriran upravljački ormar ili priključna kutija Potpuna predinstalirana ožičenja Industrijske standardne komponente Cjevovodi: Procesne cijevi od nehrđajućeg čelika Potpuno izolirane Priključci s prirubnicom i clamp spojevima Transport: Prikladno za rukovanje viličarom ili dizalicom Masivan temeljni okvir od nehrđajućeg čelika Primjena Jedinica za temperaturno kondicioniranje namijenjena je za kontrolirano održavanje temperature otopine za pranje u farmaceutskim ili kemijskim procesima. Pogodno za CIP i procese pranja, farmaceutske proizvodne linije, kemijska procesna postrojenja te temperaturno regulirane medijske krugove. Konstrukcija Kompaktna, modularna skid izvedba Prethodno montirana i spremna za priključenje Visokokvalitetna obrada nehrđajućeg čelika Industrijske kvalitetne komponente, uključujući GEMÜ armature Servisno prilagođena konstrukcija Stanje Novo postrojenje Nikada nije bilo u pogonu Originalno zapakirano Direktno iz proizvođačkog projekta Odmah dostupno FAT i status dokumentacije Tehnička dokumentacija dostupna Projektna dokumentacija dostupna Crteži dostupni P&ID dostupan Popisi komponenti dostupni Upute za rad dostupne Posebne značajke Potpuno izolirani procesni cjevovodi Visokokvalitetna izvedba od nehrđajućeg čelika Industrijski markirani dijelovi Idealno za nove projekte ili kao zamjenska/redundantna jedinica Moguća neposredna integracija

Stanje: novo, Godina proizvodnje: 2020, Funkcionalnost: potpuno funkcionalan, Naziv stroja: BRINOX procesni sustav / CIP-Skid tip CS6700 (CS6723) GMP CIP procesni skid 1.4435 Proizvođač: BRINOX Process Systems Godina proizvodnje: 2020. Tehnički podaci: Izvedba u obliku inox procesnog skida u higijenskoj konstrukciji. Mjerenje vodljivosti 1–500 µS/cm, analogni signal (AI), higijenski priključak DN 50. Mjerenje protoka 0–18.000 kg/h, analogni signal (AI), priključak DN 25, sterilni prirubnica DIN 11864-2A. Mjesta za mjerenje tlaka −1 do 9 bar i −1 do 15 bar, analogni signal (AI), higijenski priključci DN 50 ili ½'', npr. prema DIN EN ISO 228. Mjesta za mjerenje temperature −50 °C do +200 °C, analogni signal (AI), priključak DN 32, zavarivanje prema DIN 11866/A. Granični nivo-senzori, digitalni (DI), higijenski priključak DN 50. Višestruke povratne informacije o položaju putem IO-Link / digitalno. Pneumatski upravljani ON/OFF ventili (DO) u higijenskoj inox izvedbi. Materijali u kontaktu s proizvodom prema EN 1.4435 / 1.4404 (AISI 316L). Dokumentirana hrapavost površine dijelova u kontaktu s proizvodom Ra cca 0,3–0,4 µm. Primjena: Higijenski CIP i procesni sustav za farmaceutske i biotehnološke primjene. Pogodno za čišćenje procesnih cjevovoda i spremnika pod GMP uvjetima. Konstrukcija: Zavareni inox skid s orbitalno zavarivanom cijevnom mrežom. Higijenski clamp i sterilni priključci. Potpuno instrumentiran mjerenjima protoka, tlaka, temperature i vodljivosti. Pneumatska ventilacija s digitalnom povratnom signalizacijom. Komponente renomiranih proizvođača poput Endress+Hauser, Gemü, Samson, SICK i drugih. Čista, GMP-kompatibilna izvedba. Stanje: Novo. Originalno zapakirano. Nekorišteno. Nikada instalirano niti pušteno u rad. FAT / Dokumentacijski status: Proveden u cijelosti dokumentiran tvornički prihvatni test (FAT). Provjera layout-crteža dokumentirana. Provjera dostupnosti za održavanje i kalibraciju dokumentirana. Provjera hrapavosti površine dokumentirana. Provjera nepropusnosti dokumentirana. Kalibracija senzora dokumentirana. Sva zavarivanja kompletno dokumentirana i provjerena. Dkjdpfx Aioyl H Svofjl Kompletna lista dokumentacije: FAT plan i izvješće R&I dijagram Layout-crteži Liste materijala metal i polimeri Materijalni certifikati 3.1 WPQR, WPS i kvalifikacije zavarivača Zapisnici o zavarivanju i izometrijski crteži Kalibracijski certifikati mjernih uređaja Izvješća mjerenja hrapavosti površina Izvješća o ispitivanju nepropusnosti EU izjave o sukladnosti ugrađenih komponenti Dokumentacija za upravljanje Posebne značajke: GMP-kompatibilna, potpuno dokumentirana proizvodnja. Vrhunskim instrumentima opremljeno. Vrlo niska dokumentirana hrapavost površina. Odmah dostupno. Idealno za farmaceutske, biotehnološke ili servisne proizvođače s visokim zahtjevima za dokumentacijom.

Stanje: novo, Godina proizvodnje: 2020, Funkcionalnost: potpuno funkcionalan, Proizvođač BRINOX Model LEP 12 – CIP jedinica za taloženje PRE LEP 12 CS6721 Paket 3 Godina proizvodnje 2020. Stanje Novo, originalno zapakirano, nekorišteno. Postrojenje je ispitano isključivo u tvornici u sklopu FAT-a. Nije bilo puštanja u rad, proizvodnje niti kontakta s medijima u radu. Opis Modularni CIP procesni sustav za farmaceutske primjene u higijenskoj izvedbi od nehrđajućeg čelika. Kompaktna skid jedinica s potpuno integriranom mjernom, pumpnom i ventilskom tehnikom. Dimenzije Djdpfxsyl H H Ts Aifskl cca 1520 x 970 x 1994 mm Materijali Dijelovi u kontaktu s produktom: nehrđajući čelik 1.4435 Okvir/konstrukcija: 1.4301 Varene izvedbe prema EN ISO 13920 Oprema – Cijevni izmjenjivač topline – Higijenska centrifugalna pumpa – Magnetno-induktivni mjerač protoka – Mjerenje vodljivosti – Tlačni odašiljač – Mjerna mjesta temperature – Pneumatski sjedeći i membranski ventili – Konstrukcija okvira od nehrđajućeg čelika – CIP dovod / CIP povrat – Priključci za medije: NaOH, octena kiselina, para, kondenzat, otpadna voda Ispitivanja Provedena potpuna FAT inspekcija uključujući: – Provjera rasporeda – Provjera R&I dijagrama – Provjera pristupačnosti za održavanje i kalibraciju – Provjera dokumentacije – Ispitivanje hrapavosti površine – Kalibracija senzora – Provjera dokumentacije o varenju – Ispitivanje nepropusnosti stlačenim zrakom – prošla test Dostupni su certifikati o kalibraciji. Materijalni certifikati 3.1 dostupni. Kompletna dokumentacija varova (WPS, WPQR, certifikati zavarivača, NDT dokazi). Izvedba u skladu s CE standardima. Opseg isporuke Kompletno predmontirani procesni modul uključujući dokumentaciju. FAT dokumentacija, protokoli o varenju, materijalni certifikati, certifikati o kalibraciji u potpunosti uključeni.

Stanje: novo, Godina proizvodnje: 2020, Funkcionalnost: potpuno funkcionalan, kapacitet spremnika: 3.500 l, Oprema: dokumentacija / priručnik, BRINOX 3,500 L Horizontal Storage Tank – 1.4435 – Double Jacket – PED Module G – TÜV SÜD – FAT – 2020 – As New Manufacturer: BRINOX d.o.o. Type: SVBBHI-3500 Tag-No.: BH6772-BH1001 Package 30 Serial No.: 1003462 Year of manufacture: 2020 Condition: As new / unused TECHNICAL DATA Product type: Horizontal storage tank / process vessel Nominal volume: 3,500 litres Total volume: 4,082 litres Jacket volume: 226 litres Empty weight: approx. 1,760 kg Product-contacting material: 1.4435 (AISI 316L pharmaceutical grade) Jacket material: 1.4404 CE marking: CE 0036 Permissible pressure PS vessel: -1 / +3 bar Permissible pressure PS jacket: -1 / +6 bar Test pressure PT vessel: 5.6 bar Test pressure PT jacket: 10.8 bar Permissible temperature TS: -10°C to +150°C Fluid group: 2 Design according to AD 2000 regulations Pressure vessel in accordance with PED 2014/68/EU Category IV Module G – Individual approval Notified body: TÜV SÜD Industrie Service GmbH (ID no. 0036) TÜV approval including design review, final inspection and pressure test fully documented. FAT – Factory Acceptance Test The vessel was fully tested and approved at the factory. Tests performed (including): • Pressure test according to PED • Design review by TÜV SÜD • Visual inspection of all weld seams • Non-destructive testing (RT, PT) • Dimensional and drawing verification (as-built) • Verification of material certificates • Calibration of pressure gauges • Inspection of marking • Documentation audit according to inspection checklist Full FAT and TÜV protocols available. EXECUTION • Cylindrical, horizontal storage vessel • Double jacket for heating/cooling • High-end pharmaceutical design • Manway with round pressure closure • CIP pipe system • J-pipe / internal piping • Sight glass DN80 • Multiple spare and process connections • Biocontrol flanges • Heavy-duty bearing blocks / trunnion design • Lifting lugs • Nameplate with complete PED marking DOCUMENTATION – fully and systematically available • EU declaration of conformity • TÜV certificate with inspection report (Module G) • TÜV design review and certification • Material certificates 3.1 • Welder lists and work samples • Non-destructive testing reports (RT, PT) • Dimensional inspection protocols • Calibration reports for pressure gauges • Surface and manufacturing reports • Parts list • Detailed drawings (shell, cover, CIP, J-pipe, etc.) • Operating and maintenance manuals Full digital documentation file available. CONDITION • Never in productive operation • Warehouse stock • Internal surface as new • No corrosion • No signs of use • As-new industrial condition • Immediately available SUITABLE FOR • Pharmaceutical solutions • WFI / PW systems • Buffer and media production • Chemical media • GMP production facilities • Process and waste systems SPECIAL FEATURE Dkjdoylnwyjpfx Aifol High-quality BRINOX pharmaceutical manufacturing with full single approval under PED Module G by TÜV SÜD, CE 0036 marking, and documented FAT inspection. Not a standard tank – but project-quality vessel with comprehensive GMP-compliant documentation.

Stanje: novo, Godina proizvodnje: 2020, Funkcionalnost: potpuno funkcionalan, kapacitet spremnika: 3.500 l, Oprema: dokumentacija / priručnik, BRINOX 3,500 L Batch Tank – 1.4435 – Double Jacket – PED Module G – TÜV SÜD – FAT – 2020 – As New Manufacturer: BRINOX d.o.o. Type: SVMBHI-3500 Tag-No.: BH6770-BH1001 Serial number: 1003460 Year of manufacture: 2020 Condition: As new / unused BH6770-BH1001 Package 28 TECHNICAL DATA Product type: Batch tank / pressure vessel Working volume: 3,500 liters Total volume: 4,304 liters Jacket volume: 202 liters Empty weight: 1,958 kg Product contact material: 1.4435 Jacket: 1.4404 CE marking: CE 0036 Permissible vessel pressure PS: -1 / +3 bar Test pressure vessel PT: 5.6 bar Permissible jacket pressure PS: -1 / +6 bar Test pressure jacket PT: 10.8 bar Permissible temperature TS: -10°C to +150°C Fluid group: 2 Designed according to AD 2000 regulations Pressure vessel in accordance with PED 2014/68/EU Category III Module G – Individual inspection Notified body: TÜV SÜD Industrie Service GmbH (ID number 0036) TÜV acceptance including final inspection and pressure test fully documented. FAT – Factory Acceptance Test The vessel was FAT-tested and released at the manufacturer. Tests carried out include: • Pressure test according to PED • Visual inspection of all weld seams • Non-destructive testing (RT, PT as per test plan) • Dimensional and drawing check (as-built) • Internal surface roughness measurement (Ra ≤ 0.8 µm) • Calibration check of manometers • Marking verification • Complete documentation review Full FAT protocols available. DESIGN • Cylindrical, horizontal vessel • Double jacket with half-pipe coil system • Inside electropolished and passivated • High-gloss polished product surface Dkedpsylng Uofx Aifsl • Pharmaceutical-grade welding seams • Manhole DN 500 • Powder/filling nozzle DN 300 • CIP connections • Safety valve • Pressure and temperature fittings • Agitator mounting • Heavy-duty trunnion supports • Lifting lugs DOCUMENTATION – complete and well-structured Extensive project-specific quality and manufacturing documentation, including: • EU Declaration of Conformity and warranty certificates • TÜV certificate with acceptance report (Module G) • TÜV design review and certification • 3.1 material certificates • Welder lists and welding procedure qualifications (WPQR/WPS) • Non-destructive testing reports (RT, PT, etc.) • Analysis certificates for welding filler material and gas • Company qualification certificate • Surface roughness protocol • Surface treatment report • Dimensional accuracy report • Internal pressure test report • Calibration certificates • Reports and EU conformity documents for installed components • Assembly list with parts list • Component drawings • Operation and maintenance manuals Full digital documentation file available. CONDITION • Never used in production • Stored as inventory • Interior surface absolutely as new • No corrosion • No signs of use • Factory-new condition • Immediately available SUITABLE FOR • Pharmaceutical solutions • WFI / PW systems • Buffer and media preparation • Sterile liquid processes • GMP production facilities • Biotechnological applications SPECIAL FEATURES High-quality BRINOX pharmaceutical manufacturing with full PED Module G individual approval by TÜV SÜD, CE 0036 marking and documented FAT test. Not a standard tank – but tested project quality with comprehensive GMP-compliant documentation.

Stanje: novo, Godina proizvodnje: 2020, Funkcionalnost: potpuno funkcionalan, kapacitet spremnika: 1.500 l, Oprema: dokumentacija / priručnik, BRINOX 1,500 L Process Vessel – 1.4435 – Double Jacket – PED Module G – TÜV – FAT – 2020 – As New Manufacturer: BRINOX d.o.o. Tag No.: BH6726-BH1001 Type: SVMBBI-1500 Year of manufacture: 2020 Serial No.: 1003458 Equipment No.: 20051401 CE marking: CE 0036 Condition: As new / unused Empty weight: 866 kg TECHNICAL DATA Product type: Main filling vessel / process vessel Design: Cylindrical with dished heads Working volume: 1,500 litres Total volume: 1,785 litres Product-contact material: 1.4435 Jacket material: Stainless steel (double jacket design) Max. allowable pressure (PS) vessel: -1 / +3 bar Test pressure (PT): 5.4 bar Max. allowable temperature (TS): -10 °C / +150 °C Pressure vessel according to PED 2014/68/EU Module: G Fluid group: 1 SURFACE & FINISH Internal surface: mirror-polished, pharmaceutical grade Product-contact areas in 1.4435 Weld seams smoothly ground Pharma-grade CIP-capable execution EQUIPMENT • Double jacket for heating/cooling • Large manway with clamp fasteners • Multiple instrument and process nozzles • Pressure sensor / temperature connections • Bottom outlet • CIP/spray ball connections • Various blind flanges • Insulated media connections on jacket • FDA-compliant seals CONDITION • Never used in production • Warehouse item • Interior absolutely as new • No corrosion • No signs of use • Immediately available Djdpfxeykuhis Aifskl DOCUMENTATION – complete • EU Declaration of Conformity • TÜV approval documents • PED Module G documentation • Material certificates 3.1 • Pressure test report (PT 5.4 bar) • Technical drawings • FAT documents • Operating manual FEATURE Large-volume BRINOX main filling vessel 1,500 L in 1.4435, PED Category IV Module G, CE 0036, with complete documentation, pharmaceutical-grade surface finish and pressure test at 5.4 bar. Project-quality for sterile applications – immediately available.

Stanje: novo, Godina proizvodnje: 2020, Funkcionalnost: potpuno funkcionalan, kapacitet spremnika: 1.500 l, Oprema: dokumentacija / priručnik, BRINOX 1,500 L procesni spremnik – 1.4435 – dupli plašt – PED Modul G – TÜV – FAT – 2020 – kao nov Proizvođač: BRINOX d.o.o. Br. oznake: BH6722-BH1001 Godina proizvodnje: 2020 Stanje: kao novo / nekorišteno CE oznaka: CE 0036 TEHNIČKI PODACI Tip proizvoda: Glavni procesni spremnik Oblik: cilindričan s eliptičnim dnom Radni volumen: 94 – 1.500 litara Težina praznog spremnika: 866 kg Materijal u dodiru s proizvodom: 1.4435 Materijal plašta: 1.4307 Izolacija: ugrađena Radni tlak spremnika: -1 / +3 bar(g) Dopušteni tlak (PS): -1 / +3 bar(g) Ispitni tlak (PT): 5,4 bar(a) Dopuštena temperatura (TS): -10 °C / +150 °C Datum ispitivanja tlaka: 2020/04 Tlačna posuda prema PED 2014/68/EU Kategorija IV Metoda ocjene sukladnosti: Modul G Ovlašteno tijelo: TÜV SÜD Industrie Service GmbH Projektni kod: AD 2000 POVRŠINE I ZAVARI Unutarnja površina: Elektropolirana i pasivizirana Farmaceutska izvedba Vanjska površina: Industrijski brušena ZfP / Ispitivanja: RT (rendgenska kontrola) PT (penetrantna kontrola) Dokumentirano ispitivanje tlaka 2020. OPREMA • Dupli plašt za grijanje/hlađenje • Veliki čovječji otvor sprijeda • Višestruki priključci za proces • CIP priključci • Priključci za temperaturu i tlak • Sigurnosni ventili • Priključak za miješalicu • FDA kompatibilne brtve • Kompletni cjevovodni modul STANJE • Nikad nije bio u proizvodnji • Skladištena roba • Unutarnja površina potpuno nova • Nema korozije • Bez znakova korištenja • Odmah dostupan DOKUMENTACIJA – u potpunosti dostupna • EU izjava o sukladnosti • TÜV certifikati i zapisnici o pregledu • PED Modul G dokumentacija • Certifikati materijala 3.1 (EN 10204) • Zapisnici o zavarivanju • ZfP izvješća (RT / PT) • Zapisnik ispitivanja tlaka 2020. • Izvješća o površini Dedpfx Asykuc Toifokl • Detaljni i sklopni crteži • FAT dokumentacija • Upute za rad i održavanje POSEBNO BRINOX farmaceutski procesni spremnik od 1.4435 s elektropoliranom unutarnjom površinom, prema AD2000, PED kategorija IV modul G, potpuna TÜV inspekcija 2020. i potpuna tehnička dokumentacija. Projektna kvaliteta za sterilne aplikacije – odmah dostupan.

Stanje: novo, Godina proizvodnje: 2020, Funkcionalnost: potpuno funkcionalan, broj stroja/vozila: BH6723-BH1001, kapacitet spremnika: 1.000 l, Oprema: dokumentacija / priručnik, BRINOX 1.000 L pred-preljevni spremnik – 1.4435 – dvostruke stijenke – PED Kat. IV Mod. G – TÜV – FAT – 2020 – Kao nov Proizvođač: BRINOX d.o.o. Model: SVMMBI-1000 Stroj. br.: BH6723-BH1001 Serijski broj: 1003454 Godina proizvodnje: 2020 CE oznaka: CE 0036 Stanje: kao nov / nekorišten TEHNIČKI PODACI Vrsta proizvoda: pred-preljevni / procesni spremnik Nazivni volumen: 1.000 L Ukupni volumen: 1.400 L Težina praznog spremnika: cca 610–762 kg Materijal u kontaktu s proizvodom: 1.4435 (AISI 316L) Dopušteni tlak PS: -1 / +3 bar Probni tlak PT: 5,4 bar Dopuštena temperatura TS: -10 / +150 °C Grupa fluida: 1 Dksdpfx Aoykqmzsifsl Projektiranje prema AD 2000 normi Tlačni spremnik prema PED 2014/68/EU Kategorija IV Modul G – Individualna inspekcija Notificirana institucija: TÜV SÜD Identifikacijski broj: 0036 TÜV CERTIFIKAT EU Certifikat o sukladnosti (Modul G) Broj certifikata: Z-EU-SI-LJU-20-05-2702107-19125214 Broj ispitnog izvješća: P-EU-SI-LJU-20-05-2702107-19125214 Završni pregled prema PED, prilog I, točka 3.2 proveden Test na tlak prema prilogu I, točka 3.2.2 proveden Prihvat bez odstupanja Dopušteni broj ciklusa opterećenja: 10.000 (1,3 bara) Datum prihvata: 20.05.2020 FAT – tvornički ispit prihvatljivosti Potpuno proveden FAT u tvornici: • Tlačna proba • Vizualna kontrola zavarenih spojeva • NDT ispitivanja (RT/PT) • Provjera dimenzija • Mjerenje hrapavosti (≤ 0,8 µm) • Kalibracijska provjera • Provjera dokumentacije FAT u potpunosti dokumentiran. IZVEDBA • Cilindrični, horizontalni tlačni spremnik • Dupla stijenka za grijanje/hlađenje • Unutrašnjost elektropolirana • Zavarivanje prema farmaceutskim standardima • Revizijski otvor DN 500 • CIP priključak • Sigurnosni ventil • Manometar • Više procesnih i mjernih priključaka • Rad pod tlakom i vakuumom STANJE • Nikad korišten u proizvodnji • Tvornički ispitan • TÜV Modul G prihvaćen • Industrijsko, novo stanje • Bez tragova korištenja • Dostupno odmah DOKUMENTACIJA Potpuna strukturirana dokumentacija, uključuje: • EU izjavu o sukladnosti • TÜV certifikat sa zapisnikom o prihvatu • TÜV pregled konstrukcije • FAT protokole • Certifikate materijala EN 10204 3.1 • WPS/WPQR i popis zavarivača • NDT izvješća • Protokole o hrapavosti • Interno ispitivanje tlaka • Dimenzijske protokole • Kalibracijske certifikate • Popis dijelova i crteže • Upute za rad i održavanje Dostupna digitalna dokumentacija. • Farmaceutska rješenja • WFI / PW sustavi • Proizvodnja pufera i medija • Sterilni procesi tekućina • GMP postrojenja • Biotehnologija Kvalitetna BRINOX farmaceutska izvedba s PED Kat. IV Modul G individualnom inspekcijom od TÜV SÜD (CE 0036) i kompletnom FAT dokumentacijom. Nije standardni spremnik – projektna, ispitana kvaliteta. Dostupno odmah.

Stanje: novo, Godina proizvodnje: 2020, Funkcionalnost: potpuno funkcionalan, broj stroja/vozila: BH6721-BH1001, kapacitet spremnika: 1.000 l, Oprema: dokumentacija / priručnik, BRINOX 1,000 L Pre-Filling Tank – 1.4435 – Double Jacket – PED Module G – TÜV SÜD – FAT – 2020 – Like New Manufacturer: BRINOX d.o.o. Type: SVMBBl-1000 Tag No.: BH6721-BH1001 Serial No.: 1003453 Year of manufacture: 2020 Condition: Like new / unused TECHNICAL DATA Product type: Pre-filling tank / process vessel Nominal volume: 1,000 liters Total volume: 1,400 liters Empty weight: 762 kg Product-contact material: 1.4435 (AISI 316L pharmaceutical grade) CE marking: CE 0036 Permissible pressure PS: -1 / +3 bar Test pressure PT: 5.4 bar Permissible temperature TS: -10 °C to +150 °C Fluid group: 1 Design according to AD 2000 regulations Pressure vessel per PED 2014/68/EU Category IV Module G – individual inspection Notified body: TÜV SÜD Industrie Service GmbH (ID number 0036) TÜV approval including final inspection and pressure test fully documented. FAT – Factory Acceptance Test The vessel has undergone full FAT in the factory and has been released. Dksdpfx Aeykpqrjifol Tests carried out include: • Pressure test in accordance with PED • Visual inspection of all weld seams • Non-destructive testing (RT, PT as per test plan) • Dimensional and drawing comparison (as-built) • Internal roughness measurement (Ra ≤ 0.8 µm) • Calibration test of manometers • Verification of marking • Full documentation check FAT protocols fully available. DESIGN FEATURES • Cylindrical, horizontal tank • Double jacket for heating/cooling • Internally electropolished and passivated • High-gloss polished product surface • Pharmaceutical-grade weld seams • Manway DN 500 • CIP connections • Safety valve • Manometer • Bottom diaphragm valve • Agitator connection (DN 200) • Several spare connections • Heavy-duty trunnion/pin bearing • Transport and lifting device DOCUMENTATION – complete and structured available Comprehensive project-specific quality and manufacturing documentation available, including: • EU Declaration of Conformity and warranty certificates • TÜV certificate with inspection report (Module G) • TÜV design review and certification • Material certificates 3.1 • Welder lists and welding procedure qualifications (WPQR/WPS) • Non-destructive test reports (RT, PT, etc.) • Analysis certificates for welding consumables and shield gas • Company qualification certificate • Roughness protocol • Surface treatment report • Dimensional accuracy test report • Internal pressure test report • Manometer calibration certificates • Reports and EU conformity of installed components • Compilation with parts list • Part drawings • Operating and maintenance manuals Complete digital documentation folder available. CONDITION • Never used in production • Warehouse stock • Interior surface absolutely as new • No corrosion • No signs of use • Industrial 'as new' condition • Immediately available SUITABLE FOR • Pharmaceutical solutions • WFI / PW systems • Buffer and media preparation • Sterile liquid processes • GMP production facilities • Biotechnological applications SPECIAL FEATURES High-end BRINOX pharmaceutical manufacturing with complete PED Module G individual approval by TÜV SÜD, CE 0036 marking, and documented FAT test. Not a standard tank – this is certified project quality with comprehensive GMP-compliant documentation. Immediately available.

Stanje: novo, Godina proizvodnje: 2020, Funkcionalnost: potpuno funkcionalan, kapacitet spremnika: 30.000 l, Oprema: dokumentacija / priručnik, BRINOX 30,000 L WWAS / Solution Tank – 316L – PED – FAT – Complete GMP Documentation – Incl. Saddle Support – 2020 – Like New Manufacturer: BRINOX d.o.o. Tag No.: LV6456-BH1001 Serial Number: 1003464 Year of manufacture: 2020 Condition: Like new / unused Location: Europe Package LV6456-BH1001, Set 66 TECHNICAL DATA Product type: WWAS / Solution tank / Pharmaceutical process vessel Working volume: 30,000 litres Total volume: 33,213 litres Product-contacting material: Stainless steel 1.4404 (AISI 316L) Surface finish: Chemically pickled, passivated and cleaned Surface roughness: Ra < 1.6 µm Standards and Guidelines: • PED 2014/68/EU compliant • CE marking available • GMP-compliant pharmaceutical design Pressure data: Min.: –0.14 bar(g) Max.: +0.5 bar(g) Test pressure: 0.72 bar(g) Temperature range: –20°C to +50°C Hydrostatic pressure test conducted. FAT – Factory Acceptance Test Fully documented FAT performed, including: • Dimensional, visual, and identification checks • Weld seam examination and NDT • Pressure testing in accordance with PED • Inspection of all connections • Documentation and quality assessment FAT fully passed. FAT report available. DESIGN / CONSTRUCTION • Horizontal pharmaceutical process tank • Stainless steel 316L, pharmaceutical grade • Internal surface pickled and passivated • Hygienic, GMP-compliant construction Connections include: • Manhole DN500 • Inlet DN100 • Outlet DN50 • Measuring, safety and process connections Mechanical design: Dedpfx Aoykngfjifekl • Original BRINOX stainless steel saddle support included • Heavy-duty construction • Lifting points for crane handling present CONDITION • Absolutely as-new condition • Never installed or used in production • Never filled with product • No corrosion or signs of use • Original industrial packaging included • Immediately available Saddle support also in as-new condition and part of delivery scope. DOCUMENTATION – fully available (GMP-compliant) Extensive manufacturer and project documentation, including: • EU declaration of conformity and CE documentation • PED documentation • Material certificates EN 10204 – 3.1 • Welding documents (WPS/WPQR, welder lists) • NDT test reports • FAT protocol and pressure test report • Roughness and surface protocols • Calibration certificates • Detailed drawings and parts lists • Operating and maintenance manuals Documentation fully available in digital format. TRANSPORT AND PACKAGING • Professional export packaging provided • Original industrial packaging • Simple crane handling possible • Worldwide shipping available SUITABLE FOR • Pharmaceutical industry • Biotechnology • WWAS, WFI, and PW systems • Sterile process solutions • GMP production facilities SPECIAL FEATURE Project surplus from international pharmaceutical new-build project, with full FAT, PED compliance, and GMP documentation. Large-volume BRINOX 30,000 L pharmaceutical process vessel in new equipment quality, incl. saddle support – immediately available.

Stanje: novo, Godina proizvodnje: 2020, Funkcionalnost: potpuno funkcionalan, kapacitet spremnika: 9.000 l, Oprema: dokumentacija / priručnik, BRINOX 9000 L GMP Washer and Elution Solution Tank Dksdpfoykkk Hox Aifsl Horizontal Stainless Steel Pressure Vessel – Year of Manufacture 2020 – Complete FAT & GMP Documentation BH6752-BH1001 Package 32 Manufacturer: BRINOX Process Systems Serial Number: 1003558 Year of Manufacture: 2020 Nominal Capacity: 9,000 liters Design: GMP-compliant stainless steel pressure vessel Application The tank was used in a pharmaceutical production facility. Suitable for the production, storage, and provision of process solutions in a GMP environment. Construction and Features Cylindrical, horizontally oriented stainless steel vessel End-face process connections Large manway with pressure lock Integrated CIP system with spray ball Highly polished internal surface Hygienic product-contact connections Multiple measurement and instrumentation nozzles Documented weld seams with full traceability Separate stainless steel support feet included Condition Visually and technically in very good condition. Internal surfaces are bright and clean. No visible damage to the shell or the connections. Accessories and attachments included as per photo documentation. FAT and Documentation Status According to FAT documentation “IT-11.1 Inspection of Welding Documentation”, the welding documentation was inspected during the factory acceptance test (FAT 01, 23/10/2020). The following were confirmed, among others: Identification of welders and welding inspectors Welder qualifications as per EN ISO 9606-1 WPS and WPQR documentation Proof of shielding gas suitability Documented sample welds Random visual inspection without defects Traceability according to material certificates 3.1 The complete welding documentation is part of the Turn-Over Package. Documentation – fully available FAT plan and FAT report Layout and construction drawings P&ID diagrams Calibration protocols Surface and roughness inspections Leak test Welding plan WPQR WPS Welder qualifications Borescope inspection report Incoming goods inspection reports Sensor calibrations The complete technical documentation is available in digital form. Special Features Fully documented GMP-compliant design with certified welding documentation and extensive quality package. Highly suitable for reinstallation in pharmaceutical production facilities or validation-required applications.

Stanje: novo, Godina proizvodnje: 2020, Funkcionalnost: potpuno funkcionalan, kapacitet spremnika: 9.000 l, Oprema: dokumentacija / priručnik, BRINOX 9,000 L Washing Solution Tank – 316L – Double Jacket – TÜV / PED – As New Manufacturer: BRINOX d.o.o. Tag no.: BH6751-BH1001 Package 31 Year of manufacture: 2020 Condition: As new / unused Technical Data Product type: Washing solution tank Nominal volume: approx. 9,000 liters Product-contact material: 1.4404 (AISI 316L) Design: Horizontal construction CE marking: available Pressure vessel according to PED 2014/68/EU TÜV-inspected with acceptance report Double jacket for heating/cooling present Designed for pharmaceutical applications Internal surface: • High-gloss polished • Pharma-grade welds • Documented surface quality Design / Features • Heavy-duty project-specific fabrication in stainless steel 316L • Large-diameter manway with pressure lock • Integrated CIP spray lances / cleaning pipes • Multiple clamp and flange connections • Instrumentation ports (pressure, temperature, sensors) • Robust lifting and carrying lugs • Rugged, heavy industrial construction • External pipework and process connections pre-installed • Excellent accessibility for maintenance and inspection The pictures clearly show the high-quality workmanship, clean welding, and mirror-polished product-contact surface. Dkedpfx Aijykkivofol Condition • Never used in production • Stock item from surplus project • Absolutely clean interior • No corrosion • No signs of use • As-new industrial condition • Immediately available Suitable for • Washing solutions in pharmaceutical processes • WFI / PW applications • CIP media • Buffer and process solutions • Biotechnology • GMP production facilities • Sterile liquid processes Documentation – Complete and Structured Extensive, project-specific quality and manufacturing documentation is available for the tank, including: • EU Declaration of Conformity and warranty certificates • Reports and EU component verifications • Compilation documents • Partial drawings • TÜV certificate with acceptance report • Nameplate documentation • TÜV design approval and certification • Welder lists, welding procedure qualifications, work samples • Analysis certificates for welding consumables • Analysis certificates for shielding gas • Manufacturer’s qualification certificate • Non-destructive testing (NDT) reports • Material certificates (3.1) • Calibration certificates • Internal pressure test report • Dimensional accuracy inspection • Surface roughness protocol • Surface treatment report • Operating and maintenance manuals (vessel) • Operating and maintenance manuals (components) • FAT documentation (Factory Acceptance Test) Complete digital documentation folder available. Special Features This is not a standard tank, but a high-grade project-specific fabrication in true pharmaceutical quality, with certified pressure vessel design, documented manufacturing, and full PED compliance including TÜV acceptance. Heavy, robust construction, large-diameter connections, and CIP integration make this tank ideal for demanding GMP applications.

Stanje: novo, Godina proizvodnje: 2020, Funkcionalnost: potpuno funkcionalan, kapacitet spremnika: 3.200 l, Oprema: dokumentacija / priručnik, BRINOX 3,200 L Solution Vessel – 316L – Double Jacket – TÜV / PED Module G – FAT – 2020 – As New Package 17 Manufacturer: BRINOX d.o.o. Tag No.: BH6762-BH1001 Year of Manufacture: 2020 Condition: As new / unused TECHNICAL DATA Product type: ELUTION / Solution Tank Volume: 3,200 litres Material: 1.4404 (AISI 316L) CE marking: available (CE 0036) Vessel pressure: Operating pressure: -1 / +3 bar Test pressure: according to TÜV approval Jacket pressure (heating/cooling jacket): Operating pressure: -1 / +6 bar Test pressure: according to TÜV approval Temperature range: -20 °C to +150 °C Pressure vessel according to PED 2014/68/EU Module G – Individual inspection Approval by notified body (identification no. 0036) FAT – Factory Acceptance Test The vessel was inspected as part of a documented FAT. The tests included, among others: • Welding documentation inspection • Visual inspection of weld seams • Leak test • Pressure test • Surface roughness measurement • Calibration test of sensors • Layout and dimensional check • Documentation review Complete FAT report including all test protocols available. EXECUTION / FEATURES • Double jacket for heating/cooling • Constructed entirely from 316L stainless steel • High-gloss polished interior surface • Pharmaceutical-grade weld seams • CIP/SIP-capable connections • Multiple manways / access openings • Clamp and flange connections • Instrumentation prepared (pressure, temperature, sensors) • Heavy-duty project design • Lifting lugs for crane handling CONDITION • Never used in production • Surplus stock from project • Interior absolutely clean • No corrosion • No signs of use • Industrial as-new condition • Immediately available DOCUMENTATION – completely and systematically available Extensive, project-specific quality and manufacturing documentation is available for the vessel, including: • EU Declaration of Conformity and warranty certificates • TÜV certificate including approval report • TÜV design inspection and certification • Material certificates (3.1) • Welder lists and welding procedure qualifications (WPQR/WPS) • Non-destructive testing reports (NDT) • Analysis certificates for welding consumables and shielding gases • Roughness protocol • Surface treatment report • Dimensional accuracy verification • Internal pressure test • Calibration certificates • Assembly documentation • Part drawings • Operating and maintenance manuals Complete documentation folder available digitally. SUITABLE FOR • Pharmaceutical solutions • WFI / PW systems • Elution / buffer preparation • Sterile liquid processes • Biotechnology • GMP production facilities • CIP media SPECIAL FEATURE This is not a standard tank, but a high-quality BRINOX project build to true pharmaceutical quality, with certified pressure rating, full PED compliance (Module G), documented FAT inspection, and comprehensive quality documentation. Dsdpsykkhrjfx Aifokl Project-quality equipment for sterile applications – available immediately.

Stanje: novo, Godina proizvodnje: 2020, Funkcionalnost: potpuno funkcionalan, kapacitet spremnika: 3.200 l, Oprema: dokumentacija / priručnik, BRINOX 3,200 L Solution Tank – 316L – Double Jacket – TÜV / PED Module G – FAT – 2020 – As New Manufacturer: BRINOX d.o.o. Tag No.: BH6761-BH1001 Serial Number: 1003446 Year of Manufacture: 2020 Condition: As New / Unused Technical Data Product Type: ELUTION / Solution Tank Volume: 3,200 litres Empty Weight: 1,815 kg Material: 1.4404 (AISI 316L) CE Marking: CE 0036 Tank Pressure Operating Pressure: -1 / +3 bar Test Pressure: 4.6 bar Jacket Pressure (Heating/Cooling Jacket) Operating Pressure: -1 / +6 bar Test Pressure: 10.8 bar Temperature Range: -20 °C to +150 °C Pressure vessel according to PED 2014/68/EU Module G – Single Inspection Notified Body: TÜV SÜD (ID No. 0036) Permissible Number of Load Cycles: 7,300 / 5,475 at Pressure Fluctuation Range 3.3 / 4.5 bar TÜV / PED / FAT • EU Certificate of Conformity according to 2014/68/EU • Certificate No.: Z-EU-SI-LJU-20-08-2350154-14124056 • Test Report Available • Hydraulic Pressure Test Successfully Conducted • Acceptance by TÜV SÜD Industrie Service GmbH • Factory Acceptance Test (FAT) Performed • Module G Single Inspection • Complete Turn-Over Package (TOP) included Complete Documentation Available The full technical documentation package is available, including: • EU Declaration of Conformity and Warranty Certificates • TÜV Certificate with Acceptance Report • TÜV Design Inspection and Certification • Nameplate Documentation • Assembly Drawings • Detail Drawings • Welder Listings and Welding Procedure Qualifications • Sample Workpieces • Analysis Certificates of Filler Material • Analysis Certificates for Shielding Gases • Manufacturer’s Qualification Certificate • Non-Destructive Testing (NDT) Reports • Material Certificates (3.1) • Calibration Certificates • Internal Pressure Test Report • Dimensional Accuracy Inspection • Surface Roughness Protocol • Surface Treatment Report • Operating and Maintenance Manuals (for equipment and components) Documentation scope in line with project standards for pharmaceutical plants. Features • Double jacket for heating and cooling • Completely made of stainless steel 316L (1.4404) • High-gloss polished interior surface • Pharmaceutical-grade welds • CIP/SIP-capable connections • Multiple manways / inspection openings • Clamp and flange connections • Instrumentation prepared (pressure, temperature, sensors) • Robust project execution • Lifting lugs for crane handling • PED-compliant pressure design Condition • Never used in production • Surplus warehouse stock from project • Interior absolutely clean • No corrosion • No signs of use • Industrial mint condition • Immediately available Suitable for • Pharmaceutical solutions Dkedpfxeykkbxo Aifsl • WFI / PW systems • Elution / buffer preparation • Sterile liquid processes • Biotechnology • GMP production facilities • CIP media Special Feature This is not a standard tank, but a high-end BRINOX project-manufactured vessel in genuine pharmaceutical quality with: • PED Module G single inspection • TÜV SÜD acceptance • Conducted FAT • Complete welding, material, and inspection documentation • Documented surface treatment • 316L execution for sterile applications Project quality for demanding GMP applications – immediately available.