Kiper poluprikolica

STAS V-9.70 WD light 53m³

Chassis light version
In aluminum (15-6-12)
Two fully automatically welded I-beam longitudinal members with welded cross members. Chassis width 1,600 mm

Axles and suspension
430 mm disc brakes
SAF (CD) axle units 3x9t with stabilization, air bellows centrally arranged to the chassis longitudinal member, 1st axle liftable with start-off aid and manual forced lowering, Smart Board Info Center, lift/lowering valve 11, BVA brake wear indicator, automatic tipper lowering

Tyres and wheels
6 wheels with tires size 385/65 R 22.5, manufacturer optional, with Alcoa DuraBright 11.75 x 22.5 ET 120, UNI wheel bolts for aluminum rims, wheel nut caps

Landing gear
Mechanical landing legs with two speeds and 2x20t support load, with swiveling foot for air suspension. Brake system according to E.C. standard, dual-line system Wabco, spring-loaded parking brake acting on two axles and Wabco EBS-E 2S/2M incl. RSS (Roll-Stability System) with premium modulator, Wabco Smartboard Info Center, aluminum air reservoir system

Electrical system
According to StVZO regulations with 4 three-chamber lights (2×2), Aspöck type, 24 volt system with 2x7 and 1x15 pin connectors, with side marker lights, 2 LED Pro Rock work lights switchable, 2 LED work lights each on sides and rear. All air and electrical lines are neatly routed in plastic pipes!

Tipper body/bed “watertight”
Body fully welded inside
Aluminum body, side walls made of 30 mm thick plank profiles (2-3 mm), 600 mm wide, welded; floor 8 mm thick high abrasion-resistant alloy (5383H34/HB 110) with 45-degree beveled profile toward the side wall; front wall 4 mm reinforced, straight; rear wall as pendulum tailgate, straight, with LL rubber seal, spindle locks additionally 2x on the sides and 4x at the bottom; 4 pneumatic cylinders (2 open, 2 close), rubber buffers on the tipper body to the frame, mounted at the front wall

Hydraulic system
Tipping cylinder with “sleeve” mounting
Hydraulic cylinder mounted at the front wall with working pressure of 150 bar, Edbro brand, approx. 2.5 m hydraulic hose and 1" quick-release coupling, tipping angle approx. 48 degrees

Accessories
Gkjdpfx Ajxfyb Aeb Tsc
6 Parlok mudguards, complete splash guards over the entire vehicle width attached to the underrun protection, aluminum spare wheel holder, foldable side underrun protection on the right, large toolbox type 860, approx. 3 m aluminum ladder, center approx. 150 mm raised, additionally a centrally mounted bows receiver for positioning a total of 2 bows to increase loading width, roll tarp with central light strip and separate reinforcements in high-wear zones, approx. 900 g/m2 quality with quick-release roll tarp system, all-round rubber rope at the rear edge of the tarp with two pull hooks to be fixed on the swing bow; walkway on the frame in chassis color, tarp end at rear with welded-in rubber rope for waterproofing, robust foldable underrun protection in aluminum, 2" "Clear-Pass" splash guards on mudguards according to EC standard, bracket for shovel, broom and scraper mounted above the axles, etc.

Oglas je automatski preveden i možda je došlo do nekih grešaka u prijevodu.