Standardni SZM

Volvo FH460 6x2/4 / NL-TRUCK / NIGHT-AIRCO / 617DKM

Stanje: rabljeno, masa praznog vozila: 6.420 kg, maksimalna nosivost: 29.580 kg, ukupna masa: 36.000 kg, konfiguracija osovina: 3 osovine, prva registracija: 06/2008, ovjes: zrak, boja: drugo, vrsta prijenosa: drugo, vozačeva kabina: drugo, emisijska klasa: nijedan, Oprema: ABS,

Stanje: rabljeno, Spremnik od nehrđajućeg čelika 310 HL – cilindrični na nogama – reljefna površina Proizvođač Nije specificirano na natpisnoj pločici; obično ga proizvode specijalizirani proizvođači spremnika od nehrđajućeg čelika za prehrambenu i vinsku industriju. Tip Vertikalni spremnik za skladištenje od nehrđajućeg čelika – montiran na nogama – vanjska reljefna (dimljena) površina Industrijska primjena Skladištenje ili fermentacija tekućina prehrambene kvalitete (vino, sok, ulje); idealno za vinarije, preradu pića ili industrije koje zahtijevaju higijensko rukovanje tekućinama. Glavne tehničke specifikacije: - Kapacitet: 310 hektolitara (31.000 litara) - Oblik: vertikalni cilindrični spremnik - Potporanj: cijevaste noge od nehrđajućeg čelika (prilagodljiva visina) - Materijal: nehrđajući čelik prehrambene kvalitete - Površina: reljefna (dimljena) vanjska stijenka Lrodpfx Alsx Efhnsljk - Prednosti reljefne površine: - Povećana strukturna čvrstoća - Bolja krutost - Smanjen izravan prijenos topline - Uobičajeni priključci: revizijski otvor, odvodni ventil, grijaći element, senzori razine, pristupni otvor na kupoli 🧩 Namjena stroja Velikokapacitetni spremnik od nehrđajućeg čelika namijenjen higijenskom skladištenju ili fermentaciji tekućina. Reljefna površina povećava mehaničku izdržljivost te pomaže u stabilizaciji unutarnje temperature—idealan za vinsku i prehrambenu industriju koja zahtijeva preciznost i učinkovitost. ⚙️ Karakteristike / Prednosti Reljefna završna obrada daje dodatno strukturno ojačanje i poboljšava toplinsko ponašanje u odnosu na spremnike s glatkom površinom. Konstrukcija na nogama omogućuje jednostavno čišćenje i gravitacijsko pražnjenje. Pouzdano rješenje za rukovanje velikim količinama tekućina osjetljivih na temperaturu.

Stanje: rabljeno, masa praznog vozila: 7.160 kg, maksimalna nosivost: 27.840 kg, ukupna masa: 35.000 kg, konfiguracija osovina: 3 osovine, prva registracija: 06/2014, sljedeći pregled (TÜV): 09/2026, ovjes: zrak, boja: drugo, vrsta prijenosa: drugo, vozačeva kabina: drugo, emisijska klasa: nijedan, Oprema: ABS,

Stanje: rabljeno, Spremnik od nehrđajućeg čelika 300–340 HL – Cilindrični na nogama Tip Ljdjx Efy Dspfx Allork Vertikalni cilindrični spremnik za skladištenje od nehrđajućeg čelika – na nogama Industrijske primjene Skladištenje prehrambenih tekućina (vina, sokova, ulja) ili kompatibilnih tehničkih fluida. Glavne tehničke specifikacije: - Kapacitet: 300 do 340 HL (30.000 do 34.000 litara) - Oblik: Vertikalni cilindar - Konstrukcija: Montiran na nogama od nehrđajućeg čelika - Materijal: Nehrđajući čelik za prehrambenu industriju - Konfiguracija: Ravno ili nakošeno dno – izlaz na dnu – gornji ulaz 🧩 Upotreba stroja Spremnik velikog kapaciteta od nehrđajućeg čelika za skladištenje ili fermentaciju tekućina u vinarskoj, prehrambenoj ili industrijskoj preradi. ⚙️ Značajke / Razlikovne karakteristike Vertikalni dizajn na nogama omogućuje jednostavno pražnjenje i čišćenje. Robusna konstrukcija prikladna za rad s velikim volumenima.

Stanje: rabljeno, masa praznog vozila: 7.200 kg, ukupna masa: 34.000 kg, konfiguracija osovina: 3 osovine, prva registracija: 03/2013, volumen tovarnog prostora: 32 m³, ovjes: zrak, dimenzija gume: 385/65, Godina proizvodnje: 2014, Oprema: ABS,

Stanje: novo, Godina proizvodnje: 2020, Funkcionalnost: potpuno funkcionalan, kapacitet spremnika: 9.000 l, Oprema: dokumentacija / priručnik, BRINOX 9000 L GMP Washer and Elution Solution Tank Horizontal Stainless Steel Pressure Vessel – Year of Manufacture 2020 – Complete FAT & GMP Documentation BH6752-BH1001 Package 32 Manufacturer: BRINOX Process Systems Serial Number: 1003558 Year of Manufacture: 2020 Nominal Capacity: 9,000 liters Design: GMP-compliant stainless steel pressure vessel Application The tank was used in a pharmaceutical production facility. Suitable for the production, storage, and provision of process solutions in a GMP environment. Construction and Features Cylindrical, horizontally oriented stainless steel vessel End-face process connections Large manway with pressure lock Integrated CIP system with spray ball Highly polished internal surface Hygienic product-contact connections Multiple measurement and instrumentation nozzles Documented weld seams with full traceability Separate stainless steel support feet included Condition Visually and technically in very good condition. Internal surfaces are bright and clean. No visible damage to the shell or the connections. Accessories and attachments included as per photo documentation. FAT and Documentation Status According to FAT documentation “IT-11.1 Inspection of Welding Documentation”, the welding documentation was inspected during the factory acceptance test (FAT 01, 23/10/2020). The following were confirmed, among others: Identification of welders and welding inspectors Welder qualifications as per EN ISO 9606-1 WPS and WPQR documentation Proof of shielding gas suitability Documented sample welds Random visual inspection without defects Traceability according to material certificates 3.1 The complete welding documentation is part of the Turn-Over Package. Documentation – fully available FAT plan and FAT report Layout and construction drawings P&ID diagrams Calibration protocols Surface and roughness inspections Leak test Welding plan WPQR WPS Welder qualifications Borescope inspection report Incoming goods inspection reports Sensor calibrations The complete technical documentation is available in digital form. Lredpfxeykkk Ho Allok Special Features Fully documented GMP-compliant design with certified welding documentation and extensive quality package. Highly suitable for reinstallation in pharmaceutical production facilities or validation-required applications.

Stanje: novo, Godina proizvodnje: 2020, Funkcionalnost: potpuno funkcionalan, kapacitet spremnika: 9.000 l, Oprema: dokumentacija / priručnik, BRINOX 9,000 L Washing Solution Tank – 316L – Double Jacket – TÜV / PED – As New Manufacturer: BRINOX d.o.o. Tag no.: BH6751-BH1001 Package 31 Year of manufacture: 2020 Condition: As new / unused Technical Data Product type: Washing solution tank Nominal volume: approx. 9,000 liters Product-contact material: 1.4404 (AISI 316L) Design: Horizontal construction CE marking: available Pressure vessel according to PED 2014/68/EU TÜV-inspected with acceptance report Double jacket for heating/cooling present Designed for pharmaceutical applications Internal surface: • High-gloss polished • Pharma-grade welds • Documented surface quality Design / Features • Heavy-duty project-specific fabrication in stainless steel 316L • Large-diameter manway with pressure lock • Integrated CIP spray lances / cleaning pipes Lrsdpfxsykkive Allok • Multiple clamp and flange connections • Instrumentation ports (pressure, temperature, sensors) • Robust lifting and carrying lugs • Rugged, heavy industrial construction • External pipework and process connections pre-installed • Excellent accessibility for maintenance and inspection The pictures clearly show the high-quality workmanship, clean welding, and mirror-polished product-contact surface. Condition • Never used in production • Stock item from surplus project • Absolutely clean interior • No corrosion • No signs of use • As-new industrial condition • Immediately available Suitable for • Washing solutions in pharmaceutical processes • WFI / PW applications • CIP media • Buffer and process solutions • Biotechnology • GMP production facilities • Sterile liquid processes Documentation – Complete and Structured Extensive, project-specific quality and manufacturing documentation is available for the tank, including: • EU Declaration of Conformity and warranty certificates • Reports and EU component verifications • Compilation documents • Partial drawings • TÜV certificate with acceptance report • Nameplate documentation • TÜV design approval and certification • Welder lists, welding procedure qualifications, work samples • Analysis certificates for welding consumables • Analysis certificates for shielding gas • Manufacturer’s qualification certificate • Non-destructive testing (NDT) reports • Material certificates (3.1) • Calibration certificates • Internal pressure test report • Dimensional accuracy inspection • Surface roughness protocol • Surface treatment report • Operating and maintenance manuals (vessel) • Operating and maintenance manuals (components) • FAT documentation (Factory Acceptance Test) Complete digital documentation folder available. Special Features This is not a standard tank, but a high-grade project-specific fabrication in true pharmaceutical quality, with certified pressure vessel design, documented manufacturing, and full PED compliance including TÜV acceptance. Heavy, robust construction, large-diameter connections, and CIP integration make this tank ideal for demanding GMP applications.