Univerzalni tokarski stroj

WEILER Matador VS

Stanje: rabljeno, Duljina okretanja 500 mm Promjer okretanja iznad ležaja 297 mm Promjer okretanja iznad suportera 160 mm Provrt vretena 36,0 mm Prihvat DIN 55022 Gr. 5 Konus pinole: 3 MK Hod pinole 90,0 mm Broj okretaja 30 - 3550 o/min Brzine motora: 1410 / 2830 o/min Ukupna priključna snaga 3,3 kW Napon 380 V Težina stroja cca 620 kg Dimenzije D-Š-V 1420 x 700 x 1200 mm iz škole za strukovno obrazovanje - vrlo dobro stanje (!!) redovito održavan WEILER servisom posobno posebno za srednje precizne tokarske dijelove Oprema: - robusni tokarski stroj s navojnom i povlačnom vretenom - KLOPFER četverokrako stezno tijelo Ø 140 mm - KLOPFER trokrako stezno tijelo Ø 140 mm - Stezna glava za prihvat koljena sa mnogo steznih čahura - preklopni sigurnosni štitnik za steznu glavu - ključ za steznu glavu - MULTIFIX držač alata tip A, s 3 nova uloška - pomični konjić - upravljačka ploča, sprijeda lijevo - automatski pomaci za plan i gornji suport - motor pogona s promjenom pola - postolje stroja s ormarićem (prostor za pohranu) - stražnja zaštita od strugotine - tipka za hitno zaustavljanje, dolje desno - antivibracijske noge stroja - originalni uputstvo za rukovanje Pgjdpfxexacgdj Ap Hop

Stanje: rabljeno, Godina proizvodnje: 1971, Promjer obrade iznad postelja 297 mm Promjer obrade iznad kolijevke 160 mm Dužina obrade 500 mm Kratki konus veličine 5 Provrt vretena 36 mm Broj okretaja vretena 30–3550 o/min Stupnjeva broja okretaja 18 Hod pinole 90 mm Konus pinole konjića MK 3 Poprečni pomak +15 Ručni pomak konjića 500 mm Težina stroja cca 610 kg Potrebni prostor cca 1,4 x 0,7 x 1,2 m Oprema: Stezna glava s klinastim šipkama Forkardt Ø 160 mm Prihvat za stezne čahure Stezne čahure (vidi fotografiju) Držač alata Multifix sustav veličina A s 3 brza izmjenjivača Rotirajući centar Stražnja zaštitna stijena za strugotinu Zaštita stezne glave Nepomična luneta Stroj dolazi iz obrazovne radionice renomiranog njemačkog koncerna. Pgedpfjy Hxp Dox Ap Hep

Stanje: spreman za upotrebu (rabljeno), Funkcionalnost: potpuno funkcionalan, Razmak između vrhova: 500 mm Visina vrha: 160 mm Pgjdpfxjypbype Ap Hjp Provrt vretena: 36 mm Broj okretaja: 56 – 2000 o/min Konus konjića: MK 3 Pogonska snaga: 2,4 kW Težina: 650 kg Dimenzije: 1.400 x 700 x 1.220 mm Digitalni prikaz: Po želji uz nadoplatu Dodatna oprema: Dodatna oprema na upit!

Stanje: spreman za upotrebu (rabljeno), Duljina tokarenja: 500 mm Promjer tokarenja nad postoljem: 297 mm Promjer tokarenja nad suportom: 160 mm Provrt vretena: 36,0 mm Prihvat prema DIN 55022 Gr. 5 Konus protivvretena: MK 3 Hod konusa: 90,0 mm Podpfx Ajxq Hhysp Hsgp Broj okretaja vretena: 30 - 3550 o/min Brojevi okretaja motora: 1410 / 2830 o/min Ukupna priključna snaga: 3,3 kW Napon: 380 V Težina stroja cca 620 kg Dimenzije D-Š-V: 1420 x 700 x 1200 mm iz stručne škole – vrlo dobro stanje (!!) posobna posebno za precizne tokarske dijelove srednje veličine Oprema: - robusni tokarilica s navojnim i pogonskim vretenom - RÖHM stezna glava s 3 čeljusti Ø 160 mm - preklopna zaštita stezne glave - ključ za steznu glavu - MULTIFIX držač alata A, s 3 nova uloška - pomični konjić - zakretna strojna svjetiljka - upravljačka ploča, sprijeda lijevo - automatski pomaci za poprečni i gornji suport - strojno postolje s ormarićem (prostor za odlaganje) - stražnja zaštita protiv prskanja strugotina - tipka za hitno zaustavljanje - Upute za uporabu

Stanje: vrlo dobro (rabljeno), Funkcionalnost: potpuno funkcionalan, Weiler Matador VS-2 lead and feed screw lathe with 3-axis Heidenhain ND 780 digital display from training workshop!! Technical data: >> Machine number: 7702, year approx. 1990 >> Centre height: 140 mm >> Centre distance: 500 mm >> Speed range: 15 – 3550 rpm >> Spindle bore: 36 mm >> Short taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock Morse taper 3 >> Feeds from 0.012 to 0.9 mm/rev >> Thread cutting options: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.25 to 12 mm >> Brake motor >> Weight approx. 700 kg >> Length: 1.4 m, Height: 1.2 m, Depth: 0.55 m Pgjdpjy T Hqcjfx Ap Hep Accessories and features: >> 3-axis Heidenhain ND 780 digital readout >> Quick-clamping device, internal and external collets (see photo) >> 1 three-jaw chuck with 3 sets of jaws >> Multifix size A with 3 tool holders >> Spindle guard >> 1 bed stop >> Change gears >> Machine feet About the machine: For sale is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional. The slides all move smoothly and evenly. Even at high speeds, the Weiler runs quietly. The original location was a training workshop. The machine is equipped with a comprehensive range of accessories. Take the opportunity to view this machine under power on-site and see its excellent condition for yourself.

Stanje: vrlo dobro (rabljeno), Godina proizvodnje: 1988, Funkcionalnost: potpuno funkcionalan, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-axis Elesta Digital Readout from Training Workshop!! Technical Data: >> Machine No. 88-8115 Year of manufacture: 1988 >> Centre height: 140 mm >> Distance between centres: 500 mm >> Spindle speed: 15 – 3550 rpm >> Spindle bore: 36 mm >> Short taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock: Morse taper 3 >> Feeds from 0.012 to 0.9 mm/rev >> Threading options: metric, imperial, module, and diametral pitch threads >> Metric thread pitches from 0.25 to 12 mm >> Braked motor >> Weight: approx. 700 kg >> Length: 1.4 m, height: 1.2 m, depth: 0.55 m Included accessories and equipment: >> 3-axis Elesta digital readout >> Quick clamping device for internal and external collets (see photo) >> 1 piece 3-jaw chuck, 1 set of jaws Pgodpfx Apjy Tmkvs Hsp >> Multifix size A with 3 tool holders >> Spindle guard >> 1 bed stop >> Change gears >> Travelling steady >> Machine feet About the machine: Offered here is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional. All slides operate smoothly and evenly. The Weiler also runs quietly at high speeds. The original location of the machine was a training workshop. It comes with a comprehensive set of accessories. Take this opportunity to inspect the machine under power on site and see the excellent condition for yourself.

Stanje: vrlo dobro (rabljeno), Godina proizvodnje: 1992, Funkcionalnost: potpuno funkcionalan, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C, NEW, in Special Light Grey Paint Finish!!! Technical Data: >> Machine No. 92-027, Year of Manufacture: 1992 >> Centre height: 140 mm >> Centre distance: 500 mm Pgsdpfx Apsyylq Uo Hjp >> Spindle speed: 15 to 3550 rpm >> Spindle bore: 36 mm >> Short-taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock Morse taper 3 >> Feeds from 0.012 to 0.9 mm/rev >> Thread cutting: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 12 mm >> Weight approx. 700 kg >> Dimensions: Length 1.4 m, Height 1.2 m, Depth 0.55 m Accessories and Equipment: >> 3-axis digital readout system by K&C, new, with 12-month manufacturer’s warranty and operation manual Functions: Switching mm/inch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, direction switching >> 1 three-jaw chuck with 1 set of jaws >> 1 four-jaw chuck with 1 set of jaws >> Electronic spindle protection >> Multifix size A with 2 tool holders >> Motor brake >> Bed stop About the Machine: Offered is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional and has been freshly repainted in light grey. A very nice machine. The K&C 3-axis digital readout system has been retrofitted. All scales are new and are equipped with covers to protect them from dirt. All slides move smoothly and evenly. Take the opportunity to inspect this machine under power on site and see its condition for yourself.

Stanje: vrlo dobro (rabljeno), Godina proizvodnje: 1992, Funkcionalnost: potpuno funkcionalan, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C (NEW), in Special Light Grey Paint Finish!!! Technical Specifications: >> Machine No.: 92-029, Year of Manufacture: 1992 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speed: 15 – 3550 rpm >> Spindle bore: 36 mm >> Short taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock: MT 3 >> Feeds: 0.012 to 0.9 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch >> Metric thread pitches: 0.25 to 12 mm >> Weight: approx. 700 kg >> Length: 1.4 m, Height: 1.2 m, Depth: 0.55 m Pgodpfxjyylqho Ap Hep Accessories and Equipment: >> 3-axis digital readout by K&C (new) with 12 months manufacturer's warranty and user manual. Functions include: mm/inch switching, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, counting direction switching >> 1x 3-jaw chuck, 1 set of jaws >> 1x 4-jaw chuck, 2 sets of jaws >> Electronic spindle protection >> Multifix toolpost size A, incl. 2 tool holders >> Motor brake >> Bed stop About the Machine: Offered here is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional and has been newly painted in light grey. This is a very attractive machine. The 3-axis digital readout from K&C has been retrofitted. All scales are new and equipped with cover strips to protect them from dirt. All carriage movements are smooth and uniform. Take the opportunity to inspect this machine under power at our site and see the condition for yourself.

Stanje: vrlo dobro (rabljeno), Godina proizvodnje: 1992, Funkcionalnost: potpuno funkcionalan, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C, NEW, in Special Light Grey Finish!!! Technical Data: >> Machine No. 92-028, Year of Manufacture 1992 >> Centre Height: 140 mm >> Centre Distance: 500 mm >> Spindle Speed: 15 – 3550 rpm >> Spindle Bore: 36 mm >> Short Taper Spindle Nose DIN 55022-5 with bayonet locking >> Tailstock Morse Taper 3 >> Feeds from 0.012 to 0.9 mm/rev >> Thread Cutting: Metric, Inch, Module, and Diametral Pitch >> Metric Thread Pitches from 0.25 to 12 mm >> Weight approx. 700 kg >> Length 1.4 m, Height 1.2 m, Depth 0.55 m Podpfx Aoyyb T Sep Hegp Accessories and Equipment: >> 3-axis digital readout by K&C, new, 12 months manufacturer's warranty, with operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference mark, tool memory for 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching >> 1 Piece 3-jaw chuck incl. 1 set of jaws >> 1 Piece 4-jaw chuck incl. 1 set of jaws >> Electronic spindle protection >> Multifix Size A with 2 steel tool holders >> Motor brake >> Bed stop About the Machine: For sale is a Weiler Matador VS-2 in very good condition. The machine is fully functional and has been newly painted in light grey. A very attractive machine. The 3-axis digital readout from K&C has been retrofitted. All scales are new and feature protective covers to prevent contamination. All carriages move smoothly and evenly. Take the opportunity to view this machine under power on site and see the condition for yourself.

Stanje: rabljeno, Godina proizvodnje: 1992, Funkcionalnost: potpuno funkcionalan, Weiler Matador VS2 tokarilica, godina proizvodnje 1992., trokraki stezni tanjur, Multifix, stražnja zaštita od prskanja, električna zaštita steznog tanjura. Stroj je u dobrom, spremnom za rad stanju, mogućnost demonstracije pod naponom uz prethodni dogovor. Psdpfx Asx Sqvgjp Hsgp