Rabljeni hidraulične preše s dvostrukim postoljem i četverostupne preše na prodaju (321)

Stanje: novo, Godina proizvodnje: 2025, pritiskna sila: 600 t, širina stola: 1.200 mm, duljina stola: 1.500 mm, sila povlačenja: 200 t, hod klipa: 1.000 mm, radni tlak: 250 letva, Oprema: dokumentacija / priručnik, sigurnosna svjetlosna zavjesa, CRONOSSTECH CHSP 600/200 H-Type Hydraulic Deep Drawing (Spinning) Press – 8-Guided General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are developed with a double-acting working principle to ensure controlled material flow in sheet metal forming, deep drawing and spinning applications. The 8-guided H-frame structure ensures maximum rigidity during pressing; parallelism and perpendicularity tolerances are stably maintained throughout the long stroke. The CHSP 600/200 model, featuring a 600-ton main ram and a 200-ton cushion (pot) capacity, is designed to provide full control over die and workpiece during high-tonnage deep drawing and spinning operations. The frame construction is stress-relieved by vibration to guarantee long-lasting and reliable performance. ⚙️ Standard Equipment - Steel construction, 8-guided H-frame press body - Stress-relieved frame via vibration - Bronze Zr14 slide bearings - Welding applications approved by WPQR and WPS with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronically monitored filter contamination alert - Hydraulic unit oil temperature and system status monitoring on screen - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHSP 600/200 Type: Steel construction, 8-guided H-frame press body Frame Material: St52 – ERDEMİR Slide Bearing: Bronze Zr14 Capacity (Ram): 600 tons Capacity (Cushion): 200 tons Moving Table Size: 1200 × 1500 mm Fixed Table Size: 1200 × 1500 mm Nwodpsx N Uhzefx Aaheb Parallelism Tolerance: 120 microns/meter Perpendicularity Tolerance: 60 microns/meter Ram Stroke: 1000 mm Cushion Stroke: 350 mm Min. Daylight: 100 mm Max. Daylight: 1100 mm Stress Relief: Vibration-based Welding: WPQR and WPS approved by TÜRK-AK, EN ISO 15614-1:2017 (Welding operations are inspected by ‘welding coordination engineers’ certified according to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 55 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Moving Table Fast Down Speed: 150 mm/sec Moving Table Drawing Speed: 12 mm/sec Moving Table Return Speed: 170 mm/sec Cushion (Pot) Table Forward Speed: 30 mm/sec Main Cylinder Bore: Ø550 mm – Ck45 Cushion Cylinder Bore: Ø320 mm – Ck45 Auxiliary Acceleration Cylinders: 2 pcs Approx. Press Height: 5900 mm Approx. Press Width: 3250 mm Approx. Press Depth: 2300 mm Lower Table Height from Floor: 1400 mm Pre-fill Valve: NG 150 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Displacement Sensor: NOVATECHNIK or TURCK PLC: DELTA Touch Screen Display: DELTA 7” Electrical Components: SIEMENS – SCHNEIDER Approximate Weight: 35 tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Godina proizvodnje: 2025, pritiskna sila: 500 t, širina stola: 1.200 mm, duljina stola: 1.500 mm, sila povlačenja: 175 t, hod klipa: 1.000 mm, radni tlak: 250 letva, Oprema: dokumentacija / priručnik, sigurnosna svjetlosna zavjesa, CRONOSSTECH CHSP 500/175 H-Type Hydraulic Deep Drawing (Spinning) Press – 8-Gibbed General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered with a double-action working principle to ensure controlled material flow during sheet metal forming, deep drawing, and spinning applications. Thanks to its 8-gibbed H-frame structure, it provides maximum rigidity during pressing; parallelism and perpendicularity tolerances are stably maintained throughout the full stroke length. The CHSP 500/175 model features a main ram with 500-ton capacity and a blankholder (die cushion) ram with 175-ton capacity, designed for full control over the die and workpiece in high-tonnage deep drawing and spinning operations. The frame construction is stress-relieved by vibration to ensure long life and reliable performance. ⚙️ Standard Equipment - Steel construction, 8-gibbed H-frame press body - Vibration stress-relieved frame structure - Bronze Zr14 gib bearings - WPQR and WPS certified welding, approved by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - 7” DELTA touchscreen panel - Adjustable ram and die cushion stroke control - Adjustable ram and die cushion tonnage (pressure) control - Automatic lubrication system - Electronic filter contamination alert - Oil temperature and hydraulic system status monitoring via display - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHSP 500/175 - Type: Steel construction, 8-gibbed H-frame press body - Frame Material: St52 – ERDEMİR - Gib Bearing: Bronze Zr14 - Ram Capacity: 500 Ton - Die Cushion Capacity: 175 Ton - Moving Table Size: 1200 × 1500 mm - Fixed Table Size: 1200 × 1500 mm - Parallelism Tolerance: 120 micron/m - Perpendicularity Tolerance: 60 micron/m - Ram Stroke: 1000 mm - Die Cushion Stroke: 350 mm - Min. Daylight: 100 mm - Max. Daylight: 1100 mm - Stress Relief: Vibratory stress relieving - Welding: WPQR and WPS certified and accredited by TÜRK-AK EN ISO 15614-1/2017 (Welding operations are supervised by “welding coordination engineers” certified according to EN ISO 14731) - Max. Working Pressure: 250 Bar - Total Motor Power: 45 kW – IE3 - Main Pump: 70 cm³ – REXROTH or PARKER - Moving Table Fast Down Speed: 150 mm/sec - Moving Table Drawing Speed: 12 mm/sec - Moving Table Return Speed: 170 mm/sec Nwedpfjx N Uhujx Aahjb - Die Cushion Forward Speed: 30 mm/sec - Main Cylinder Bore: Ø500 mm – Ck45 - Die Cushion Cylinder Bore: Ø300 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 units - Approx. Overall Height: 5800 mm - Approx. Overall Width: 3250 mm - Approx. Overall Depth: 2200 mm - Table Height from Floor: 1400 mm - Pre-fill Valve: NG 150 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Position Encoder: NOVATECHNIK or TURCK - PLC Application: DELTA - Touchscreen Panel: DELTA 7” - Switchgear Components: SIEMENS – SCHNEIDER - Approximate Weight: 26 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Godina proizvodnje: 2025, pritiskna sila: 400 t, širina stola: 1.200 mm, duljina stola: 1.500 mm, sila povlačenja: 150 t, hod klipa: 1.000 mm, radni tlak: 250 letva, Oprema: dokumentacija / priručnik, sigurnosna svjetlosna zavjesa, CRONOSSTECH CHSP 400/150 H-Type Hydraulic Deep Drawing (Spinning) Press – 8-Gibbed General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered with a double-acting working principle to ensure controlled material flow in sheet metal forming, deep drawing, and spinning applications. The 8-gibbed H-frame design delivers maximum rigidity during the pressing operation; parallelism and squareness tolerances are stably maintained throughout the entire stroke length. The CHSP 400/150 model, equipped with a 400-ton main ram and a 150-ton cushion (blankholder), is designed for high-tonnage deep drawing and spinning applications. The frame construction is stress-relieved by vibration for long-lasting, reliable operation. ⚙️ Standard Equipment - Steel-construction, 8-gibbed H-press frame design - Stress-relieved frame via vibration - Bronze Zr14 gib bushings - WPQR and WPS certified welding applications with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronically monitored filter contamination warning - Display of hydraulic unit oil temperature and system status on screen - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHSP 400/150 Type: Steel-construction, 8-gibbed H-press frame grame Material: St52 – ERDEMIR Gib Bushing: Bronze Zr14 Capacity (Ram): 400 Ton Capacity (Cushion): 150 Ton Moving Table Size: 1200 × 1500 mm Fixed Table Size: 1200 × 1500 mm Parallelism Tolerance: 120 micron/meter Squareness Tolerance: 60 micron/meter Stroke (Ram): 1000 mm Stroke (Cushion): 350 mm Nodpfox N Uhhjx Aahswb Min. Daylight: 100 mm Max. Daylight: 1100 mm Stress Relieving: Vibration stress relief Welding Application: WPQR and WPS certified by TÜRK-AK EN ISO 15614-1/2017 (Supervised by "welding coordination engineers" certified according to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 37 kW – IE3 Main Pump: 45 cm³ – REXROTH or PARKER Moving Table Fast Down Speed: 150 mm/s Moving Table Drawing Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Cushion Table Forward Speed: 30 mm/s Main Cylinder Bore: Ø450 mm – Ck45 Cushion Cylinder Bore: Ø280 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approx. Machine Height: 5600 mm Approx. Machine Width: 3250 mm Approx. Machine Depth: 2200 mm Table Height from Floor: 1400 mm Pre-fill Valve: NG 150 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Scale: NOVATECHNIK or TURCK PLC: DELTA Touch Panel Display: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approx. Weight: 24 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Godina proizvodnje: 2025, pritiskna sila: 300 t, širina stola: 1.200 mm, duljina stola: 1.500 mm, sila povlačenja: 100 t, hod klipa: 800 mm, radni tlak: 250 letva, Oprema: dokumentacija / priručnik, sigurnosna svjetlosna zavjesa, CRONOSSTECH CHSP 300/100 H-Type Hydraulic Deep Drawing (Spinning) Press – 8 Guideways General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are designed using a double-acting operation principle to ensure controlled material flow during sheet metal forming, deep drawing, and spinning applications. Thanks to the 8-guideway H-frame construction, maximum rigidity is achieved during pressing, and parallelism and squareness tolerances are stably maintained throughout the long stroke. The CHSP 300/100 model, with its 300-ton main ram and 100-ton lower cushion (pot) capacity, is engineered for deep drawing and spinning applications requiring high tonnage. The frame structure is stress-relieved by vibration to ensure long-lasting and reliable operation. ⚙️ Standard Equipment - Steel construction, 8-guideway H-frame press body - Vibration-stress-relieved frame structure - Bronze Zr14 guide bushings - TÜRK-AK accredited, WPQR and WPS certified welding (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in accordance with CE standards - PLC controlled hydraulic system - 7" DELTA touch panel display - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control Nedpfx Ajx N Uhbjahswb - Automatic lubrication system - Electronic filter contamination warning - Real-time display of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHSP 300/100 Type: Steel construction, 8-guideway H-frame press body Frame Material: St52 – ERDEMİR Guideways: Bronze Zr14 Ram Capacity: 300 Ton Cushion Capacity: 100 Ton Moving Table Size: 1200 × 1500 mm Fixed Table Size: 1200 × 1500 mm Parallelism Tolerance: 120 micron/m Squareness Tolerance: 60 micron/m Ram Stroke: 800 mm Cushion Stroke: 300 mm Min. Shut Height: 100 mm Max. Shut Height: 900 mm Weld Stress Relief: By vibration Welding Application: WPQR and WPS certified by TÜRK-AK EN ISO 15614-1/2017 (Welding applications are supervised by "welding coordination engineers" certified to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 37 kW – IE3 Main Pump: 45 cm³ – REXROTH or PARKER Moving Table Fast Down Speed: 150 mm/s Moving Table Drawing Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Cushion Forward Speed: 30 mm/s Main Cylinder Bore: Ø390 mm – Ck45 Cushion Cylinder Bore: Ø230 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approx. Press Height: 4400 mm Approx. Press Width: 3250 mm Approx. Press Depth: 2200 mm Bottom Table Height from Floor: 1350 mm Pre-fill Valve: NG 150 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Scale: NOVATECHNIK or TURCK PLC System: DELTA Touch Panel Display: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approximate Weight: 21 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Stanje: novo Rok isporuke: cca 4 mjeseca od narudžbe Zemlja podrijetla: Italija Nedpfx Aaewir Acohewb Cijena: 172.500 € Leasing rata: 3.260,25 € Pritisna sila: 300 t Hod: 500 mm Prostor između stupova: 1250 x 1000 mm Ugradna visina: 600 mm Brzina brzog hoda: 22 mm/s Radna brzina: 2 mm/s Motor: 7,5 kW Duljina: 1750 mm Širina: 1500 mm Visina: 2800 mm Vođenje kroz 4 stupa Vođenje klipa – okruglo Radni stol i klip sa T-utorima Upravljanje s dvije ruke Siemens PLC upravljač Manometar Upute za uporabu OPCIJE: Svjetlosna barijera Cijena na upit Siemens touchscreen upravljanje, memoriranje do 50 programa, za programiranje: - Udjel hoda prema gore i dolje - Vrijeme zadržavanja na dnu - Vrijeme dekompresije - Namještanje radnog pritiska - Brojač komada - Prestop u smjeru gore i dolje - Podešavanje za ručni i automatski rad - Upravljanje alarmima i anomalijama Cijena na upit Brojač radnih sati Cijena na upit Brojač komada Cijena na upit Dekompresijski ventil Cijena na upit Hladnjak ulja s dekompresijskim ventilom Cijena na upit Prekidač tlaka Cijena na upit

Stanje: novo, Stanje: novo Rok isporuke: cca. 4 mjeseca od narudžbe Zemlja porijekla: Italija Cijena: 132.500 € Leasing rata: 2.504,25 € Tonska sila: 200 t Hod: 500 mm Područje između stupova: 1250x1000 mm Ugradbena visina: 600 mm Brzi hod: 25 mm/s Radna brzina: 3,5 mm/s Motor: 7,5 kW Duljina: 1550 mm Širina: 1300 mm Visina: 2700 mm 4-stupna vodilica Vođenje klipa okruglo Radni stol i klip s T-utorima Dvostruka ručna upravljačka funkcija Siemens PLC Manometar Upute za uporabu OPCIJE: Svjetlosna barijera Cijena na upit Siemens upravljanje putem zaslona na dodir, mogućnost spremanja 50 programa, za programiranje: - Brzine hoda prema gore i dolje - Vrijeme zadržavanja u donjem položaju - Vrijeme dekompresije - Podesivanje radnog tlaka - Brojač komada - Pre-stop u gornjem i donjem hodu - Postavke za ručni i automatski rad - Upravljanje alarmima i anomalijama Cijena na upit Brojač radnih sati Cijena na upit Brojač komada Cijena na upit Nwodpswiq Abofx Aahsb Dekompresijski ventil Cijena na upit Uljarni hladnjak s dekompresijskim ventilom Cijena na upit Tlačni prekidač Cijena na upit

Stanje: novo, Stanje: novo Rok isporuke: cca 4 mjeseca od narudžbe Zemlja podrijetla: Italija Cijena: 104.000 € Leasing rata: 1.965,6 € Tlačna sila: 125 t Hod: 500 mm Stol: 1200x700 mm Ugradbena visina: 600 mm Brzi hod: 115 mm/s Radna brzina: 7 mm/s Brzina povrata: 70 mm/s Motor: 15 kW Duljina: 2550 mm Širina: 1500 mm Visina: 2600 mm Nwodowiqxpspfx Aahjb 4-struko vođenje klipa Stol i klip s T-utorima Dvoručno upravljanje Podešavanje hoda Podešavanje tlaka

Stanje: novo, Godina proizvodnje: 2025, pritiskna sila: 250 t, širina stola: 1.200 mm, duljina stola: 1.500 mm, sila povlačenja: 80 t, hod klipa: 800 mm, radni tlak: 250 letva, Oprema: dokumentacija / priručnik, sigurnosna svjetlosna zavjesa, CRONOSSTECH CHSP 250/80 H-Type Hydraulic Deep Drawing (Spinning) Press – 8 Guides General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered with a double-acting working principle to ensure controlled material flow in sheet metal forming, deep drawing, and spinning applications. Thanks to their 8-guide H-frame structure, maximum rigidity is achieved during the pressing process; parallelism and perpendicularity tolerances are consistently maintained throughout the stroke. The CHSP 250/80 model, featuring a 250-ton main ram and 80-ton cushion (pot) capacity, is designed for medium-to-high tonnage deep drawing and spinning operations. The frame construction is stress-relieved by vibration, ensuring long-lasting and reliable operation. ⚙️ Standard Equipment - Steel construction, H-frame press body with 8 guides - Frame structure stress-relieved by vibration - Bronze Zr14 guide bushings - WPQR and WPS-approved welding applications certified by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable stroke control for ram and cushion (pot) - Adjustable tonnage (pressure) control for ram and cushion (pot) - Automatic lubrication system - Electronic filter contamination warning - Monitoring of hydraulic oil temperature and system status on the screen - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHSP 250/80 Type: Steel construction, H-frame press body with 8 guides Frame Material: St52 – ERDEMİR Guide Bushings: Bronze Zr14 Capacity (Ram): 250 Ton Capacity (Cushion): 80 Ton Movable Table Dimensions: 1200 × 1500 mm Fixed Table Dimensions: 1200 × 1500 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 800 mm Stroke (Cushion): 300 mm Min. Die Opening: 100 mm Max. Die Opening: 900 mm Stress Relieving: Vibrational stress relief Welding Application: WPQR and WPS-certified and TÜRK-AK accredited EN ISO 15614-1/2017 (Welding applications are supervised by “welding coordination engineers” certified to EN ISO 14731) Max. Operating Pressure: 250 Bar Total Motor Power: 37 kW – IE3 Nwedpfxsx N Uaqe Aaheb Main Pump: 45 cm³ – REXROTH or PARKER Movable Table Rapid Descent Speed: 150 mm/sec Movable Table Drawing Speed: 12 mm/sec Movable Table Return Speed: 170 mm/sec Cushion Table Forward Speed: 30 mm/sec Main Cylinder Bore: Ø360 mm – Ck45 Cushion Cylinder Bore: Ø200 mm – Ck45 Auxiliary Acceleration Cylinders: 2 pcs Approx. Press Height: 4200 mm Approx. Press Width: 3250 mm Approx. Press Depth: 2200 mm Bottom Table Height from Floor: 1350 mm Primary Pre-Fill Valve: NG 125 Hydraulic Power Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Displacement Sensor: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel Display: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 18 Tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Stanje: novo, Godina proizvodnje: 2025, pritiskna sila: 200 t, širina stola: 1.000 mm, duljina stola: 1.200 mm, sila povlačenja: 70 t, hod klipa: 800 mm, radni tlak: 250 letva, Oprema: dokumentacija / priručnik, sigurnosna svjetlosna zavjesa, CRONOSSTECH CHSP 200/70 H-Type Hydraulic Deep Drawing (Flow Forming) Press – 8-Gib General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are developed with a double-acting working principle to ensure controlled material flow during sheet metal forming, deep drawing, and flow forming applications. The 8-gib H-frame structure provides maximum rigidity throughout the pressing operation, maintaining parallelism and perpendicularity tolerances stably along the stroke. The CHSP 200/70 model, with a 200-ton main ram and a 70-ton blank holder (pot) capacity, is designed for medium to high tonnage deep drawing and flow forming operations. The frame construction is stress-relieved by vibration, ensuring long-lasting and reliable operation. ⚙️ Standard Equipment - Steel construction, 8-gib H-frame press type - Vibration stress-relieved frame structure - Bronze Zr14 slideway bearings - WPQR and WPS certified welding by TURK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacture in compliance with CE standards - PLC controlled hydraulic system - 7” DELTA touchscreen panel - Adjustable ram and pot stroke controls - Adjustable ram and pot tonnage (pressure) controls - Automatic lubrication system - Electronic filter contamination warning system - Monitoring of hydraulic unit oil temperature and system status via display - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switching components 📐 Technical Specifications – CHSP 200/70 Type: Steel construction, 8-gib H-frame press Frame Material: St52 – ERDEMİR Slideway Bearings: Bronze Zr14 Capacity (Ram): 200 Ton Capacity (Pot): 70 Ton Moving Table Size: 1000 × 1200 mm Fixed Table Size: 1000 × 1200 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Ram Stroke: 800 mm Pot Stroke: 300 mm Min. Daylight: 100 mm Max. Daylight: 900 mm Stress Relieving: Vibration stress relief Nwjdpex N T U Tjfx Aahjb Welding Certification: WPQR & WPS, TURK-AK accredited, EN ISO 15614-1/2017 (Welding inspected by certified “welding coordination engineers” as per EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 22 kW – IE3 Main Pump: 32 cm³ – REXROTH or PARKER Moving Table Fast Down Speed: 150 mm/sec Moving Table Drawing Speed: 12 mm/sec Moving Table Return Speed: 170 mm/sec Pot Table Advance Speed: 30 mm/sec Main Cylinder Bore: Ø320 mm – Ck45 Pot Cylinder Bore: Ø190 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approx. Press Height: 3800 mm Approx. Press Width: 2950 mm Approx. Press Depth: 2200 mm Bolster Height from Floor: 1350 mm Pre-fill Valve: NG 125 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Displacement Ruler: NOVATECHNIK or TURCK PLC Application: DELTA Touchscreen Panel: DELTA 7” Switching Components: SIEMENS – SCHNEIDER Approximate Weight: 13.5 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Godina proizvodnje: 2025, pritiskna sila: 150 t, širina stola: 1.000 mm, duljina stola: 1.200 mm, sila povlačenja: 50 t, hod klipa: 600 mm, radni tlak: 250 letva, Oprema: dokumentacija / priručnik, sigurnosna svjetlosna zavjesa, CRONOSSTECH CHSP 150/50 H-Type Hydraulic Deep Drawing (Stamping) Press – 8 Guided Slides General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered with a double-acting working principle to provide controlled material flow in sheet metal forming, deep drawing, and stamping applications. Thanks to its H-frame construction with 8 slide guides, it achieves maximum rigidity during the pressing process; parallelism and perpendicularity tolerances are consistently maintained throughout the stroke. The CHSP 150/50 model, featuring a 150-ton main ram and a 50-ton cushion (blankholder) capacity, is designed for precise, repeatable deep drawing operations. The frame construction is stress-relieved by vibration to ensure a long service life and reliable operation. ⚙️ Standard Equipment - Steel construction, H-frame body with 8 slide guides - Stress-relieved frame structure by vibration - Bronze Zr14 slide bearings - WPQR and WPS certificated welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - 7" DELTA touch screen panel - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronically controlled filter contamination warning - On-screen monitoring of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration Nedpfx Aaox N T U Hshewb - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHSP 150/50 Type: Steel construction, H-frame body with 8 slide guides Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 150 Tons Capacity (Cushion): 50 Tons Moving Table Size: 1000 × 1200 mm Fixed Table Size: 1000 × 1200 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Ram Stroke: 600 mm Cushion Stroke: 200 mm Min. Daylight Opening: 100 mm Max. Daylight Opening: 700 mm Stress Relief: By vibration Welding Application: WPQR and WPS approved by TÜRK-AK, EN ISO 15614-1/2017 (Welding operations are supervised by “welding coordination engineers” certified to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 18.5 kW – IE3 Main Pump: 32 cm³ – REXROTH or PARKER Moving Table Fast Descent Speed: 150 mm/s Moving Table Drawing Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Cushion Table Forward Speed: 30 mm/s Main Cylinder Bore: Ø280 mm – Ck45 Cushion Cylinder Bore: Ø160 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approximate Press Height: 3650 mm Approximate Press Width: 2950 mm Approximate Press Depth: 2000 mm Lower Table Height from Floor: 1250 mm Pre-fill Valve: NG 100 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Distance Scale: NOVATECHNIK or TURCK PLC Application: DELTA Touch Screen Panel: DELTA 7" Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 11 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Godina proizvodnje: 2025, pritiskna sila: 100 t, širina stola: 1.000 mm, duljina stola: 1.200 mm, sila povlačenja: 40 t, hod klipa: 600 mm, radni tlak: 250 letva, Oprema: dokumentacija / priručnik, sigurnosna svjetlosna zavjesa, CRONOSSTECH CHSP 100/40 H-Type Hydraulic Deep Drawing (Flanging) Press – 8-Guided Slides General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are designed with a double-acting operating principle to provide controlled material flow during sheet metal forming, deep drawing, and flanging applications. The 8-guided slide H-frame structure ensures maximum rigidity throughout the pressing process; parallelism and perpendicularity tolerances are maintained consistently along the stroke. The CHSP 100/40 model is designed for precise deep drawing and flanging operations, offering a 100-ton main ram and a 40-ton blankholder ram (cushion) capacity. The frame structure is stress-relieved via vibration method to ensure long-lasting and reliable operation. ⚙️ Standard Equipment - Steel construction, 8-guided slide H-frame press body - Stress-relieved frame structure (vibration method) - Bronze Zr14 slide guide bearings - Welding applications certified by TÜRK-AK accredited WPQR and WPS (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in accordance with CE standards - PLC-controlled hydraulic system - 7” DELTA touch panel display - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronically monitored filter contamination warning - On-screen monitoring of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHSP 100/40 Type: Steel construction, 8-guided slide H-frame press body Frame Material: St52 – ERDEMİR Slide Guide Bearings: Bronze Zr14 Capacity (Ram): 100 tons Capacity (Cushion): 40 tons Moving Table Dimensions: 1000 × 1200 mm Fixed Table Dimensions: 1000 × 1200 mm Parallelism Tolerance: 120 micron/m Nwsdpfxox N T Uys Aahsb Perpendicularity Tolerance: 60 micron/m Ram Stroke: 600 mm Cushion Stroke: 200 mm Minimum Shut Height: 100 mm Maximum Shut Height: 700 mm Weld Stress Relief: Vibration method Weld Application: WPQR and WPS certified by TÜRK-AK according to EN ISO 15614-1/2017 (supervised by certified welding coordination engineers as per EN ISO 14731) Max. Operating Pressure: 250 Bar Total Motor Power: 11 kW – IE3 Main Pump: 22 cm³ – REXROTH or PARKER Moving Table Fast Down Speed: 150 mm/s Moving Table Drawing Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Cushion Forward Speed: 30 mm/s Main Cylinder Bore: Ø230 mm – Ck45 Cushion Cylinder Bore: Ø140 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approx. Press Height: 3400 mm Approx. Press Width: 2950 mm Approx. Press Depth: 2000 mm Lower Table Height From Floor: 1250 mm Pre-fill Valve: NG 100 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Transducer: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel Display: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 9 tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Godina proizvodnje: 2025, pritiskna sila: 2.500 t, širina stola: 1.800 mm, duljina stola: 2.600 mm, hod klipa: 1.000 mm, radni tlak: 250 letva, Oprema: dokumentacija / priručnik, sigurnosna svjetlosna zavjesa, CRONOSSTECH CHP 2500 H-Type Hydraulic Press – 8-Guided Slides General Description The CRONOSSTECH CHP series H-type hydraulic presses are engineered for heavy-duty forming, deep drawing, and metal spinning operations that require extremely high tonnage. The 8-guided slide H-frame construction ensures maximum rigidity throughout the pressing operation; parallelism and perpendicularity tolerances are stably maintained along the full stroke length. The CHP 2500 model, with its large bolster dimensions, multi-cylinder main press configuration, and high-capacity hydraulic system, is specifically designed for automotive, heavy industry, defense industry, and high-tonnage die applications. The machine frame construction is stress-relieved by vibration to ensure long-lasting and reliable operation. ⚙️ Standard Equipment • All-steel construction, 8-slides H-type press frame • Stress-relieved frame by vibration • Zr14 bronze slide bearing bushings • WPQR and WPS certified welds by TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) • Design and manufacturing according to CE standards • PLC-controlled hydraulic system • 7” DELTA touch screen panel • Adjustable ram stroke and tonnage control • Automatic lubrication system • Electronically controlled filter contamination alert • Real-time oil temperature and system status monitoring • Cooling system • Off-line filtration • Operator safety systems • SIEMENS – SCHNEIDER switchgear 📐 Technical Specifications – CHP 2500 Type: Steel construction, 8-guided H-type press frame Frame Material: St52 – ERDEMİR Slide Bearing: Bronze Zr14 Capacity (Ram): 2500 Ton Moving Bolster Size: 1800 × 2600 mm Fixed Bolster Size: 1800 × 2600 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Stroke (Ram): 1000 mm Min. Daylight Opening: 200 mm Nwjdpfxex N T S Es Aahsb Max. Daylight Opening: 1200 mm Stress Relief: Vibratory stress relieving Welding: WPQR and WPS certified by TÜRK-AK (EN ISO 15614-1/2017) Max. Operating Pressure: 250 Bar Total Motor Power: 180 kW – IE3 Main Pump: 140 cm³ – REXROTH or PARKER Rapid Descent Speed (Moving Bolster): 150 mm/sec Pressing Speed (Moving Bolster): 12 mm/sec Return Speed (Moving Bolster): 170 mm/sec Main Cylinder Bore: Ø565 mm – Ck45 (4 units) Auxiliary Acceleration Cylinders: 2 units Approx. Press Height: 6500 mm Approx. Press Width: 3950 mm Approx. Press Depth: 2600 mm Bolster Height from Floor: 1500 mm Pre-fill Valve: NG 200 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Sensor: NOVATECHNIK or TURCK PLC: DELTA Touch Panel: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approx. Weight: 120 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Godina proizvodnje: 2025, pritiskna sila: 2.000 t, širina stola: 1.500 mm, duljina stola: 2.500 mm, hod klipa: 1.000 mm, radni tlak: 250 letva, Oprema: dokumentacija / priručnik, sigurnosna svjetlosna zavjesa, CRONOSSTECH CHP 2000 H-Type Hydraulic Press – 8-Guided General Description The CRONOSSTECH CHP series H-type hydraulic presses are designed for heavy forming, deep drawing, embossing, and die operations that require extremely high tonnage. Thanks to the 8-guided H-frame structure, maximum rigidity during pressing is ensured, and parallelism and perpendicularity tolerances are maintained throughout the long stroke. The CHP 2000 model, with its large table dimensions, high-capacity hydraulic system, and robust motor, offers a reliable and long-lasting solution for the automotive, defense, heavy industry, and high-tonnage production lines. The frame structure is stress-relieved through vibration to guarantee stable operation. ⚙️ Standard Equipment - Steel construction, 8-guided H-frame press type - Frame structure stress-relieved by vibration - Bronze Zr14 slide bearings - Welding applications certified with WPQR and WPS, accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in accordance with CE standards - PLC-controlled hydraulic system - DELTA 7” touchscreen panel - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - Display of oil temperature and system status of hydraulic unit on the screen - Cooling system - Off-line filtration - Safety systems for operator protection Nwodpfxsx N T Sro Aahjb - SIEMENS – SCHNEIDER switchgear 📐 Technical Specifications – CHP 2000 Type: Steel construction, 8-guided H-frame press Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 2000 tons Moving Table Dimensions: 1500 × 2500 mm Fixed Table Dimensions: 1500 × 2500 mm Parallelism Tolerance: 120 microns/meter Perpendicularity Tolerance: 60 microns/meter Stroke (Ram): 1000 mm Min. Daylight: 200 mm Max. Daylight: 1200 mm Stress Relieving: Vibration Welding Application: EN ISO 15614-1/2017 certified, WPQR and WPS approved, accredited by TÜRK-AK Max. Operating Pressure: 250 Bar Total Motor Power: 180 kW – IE3 Main Pump: 140 cm³ – REXROTH or PARKER Moving Table Rapid Down Speed: 150 mm/sec Moving Table Drawing Speed: 12 mm/sec Moving Table Return Speed: 170 mm/sec Main Cylinder Inner Diameter: Ø720 mm – Ck45 (2 units) Auxiliary Acceleration Cylinders: 2 units Approximate Height of Press: 6300 mm Approximate Width of Press: 3850 mm Approximate Depth of Press: 2500 mm Height of Lower Table from Floor: 1500 mm Pre-Fill Valve: NG 200 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Sensor: NOVATECHNIK or TURCK PLC Application: DELTA Touchscreen Panel: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approximate Weight: 95 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Godina proizvodnje: 2025, pritiskna sila: 1.500 t, širina stola: 1.500 mm, duljina stola: 2.400 mm, hod klipa: 1.000 mm, radni tlak: 250 letva, Oprema: dokumentacija / priručnik, sigurnosna svjetlosna zavjesa, CRONOSSTECH CHP 1500 H-Type Hydraulic Deep Drawing Press – 8-Guided General Description The CRONOSSTECH CHP series H-type hydraulic deep drawing presses are engineered for deep drawing, forming, and heavy-duty shaping processes that demand high tonnage. The H-frame structure equipped with 8 linear guides ensures maximum rigidity and stability during pressing, enabling precise parallelism and perpendicularity tolerances to be maintained. The CHP 1500 model, featuring large platen dimensions, a robust hydraulic system, and long stroke capacity, provides a reliable solution for the automotive industry, defense sector, heavy metal forming, and industrial production lines. The machine frame is stress-relieved using vibration methods for durability and stable long-term operation. ⚙️ Standard Equipment - Steel construction, 8-guided H-frame press body - Vibration-stress-relieved frame structure - Bronze Zr14 slideway bearings - WPQR and WPS certified welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing compliant with CE standards - PLC-controlled hydraulic system - 7” DELTA touchscreen panel - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - On-screen monitoring of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration system - Safety systems for operator protection - SIEMENS and SCHNEIDER switchgear components 📐 Technical Specifications – CHP 1500 Type: Steel construction, 8-guided H-frame press body Frame Material: St52 – ERDEMİR Slideway Bearings: Bronze Zr14 Capacity (Ram): 1,500 Tons Moving Platen Size: 1,500 × 2,400 mm Fixed Platen Size: 1,500 × 2,400 mm Parallelism Tolerance: 120 microns/meter Perpendicularity Tolerance: 60 microns/meter Stroke (Ram): 1,000 mm Min. Daylight: 200 mm Max. Daylight: 1,200 mm Stress Relief: Vibration method Welding: TÜRK-AK accredited WPQR and WPS certification, EN ISO 15614-1:2017 Max. Working Pressure: 250 Bar Total Motor Power: 90 kW – IE3 Main Pump: 101 cm³ – REXROTH or PARKER Rapid Descent Speed (Movable Platen): 150 mm/sec Drawing Speed (Movable Platen): 12 mm/sec Return Speed (Movable Platen): 170 mm/sec Main Cylinder Inside Diameter: Ø620 mm – Ck45 (2 units) Auxiliary Speed-Up Cylinders: 2 units Approx. Height: 6,250 mm Approx. Width: 3,750 mm Approx. Depth: 2,500 mm Nwodpfx Aajx N T R Usheb Lower Platen Height from Floor: 1,500 mm Primary Filling Valve: NG 200 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Measuring Scale: NOVATECHNIK or TURCK PLC: DELTA Touchscreen Panel: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approx. Weight: 70 Tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Stanje: novo, Godina proizvodnje: 2025, pritiskna sila: 1.200 t, širina stola: 1.500 mm, duljina stola: 2.000 mm, hod klipa: 1.000 mm, radni tlak: 250 letva, Oprema: dokumentacija / priručnik, sigurnosna svjetlosna zavjesa, CRONOSSTECH CHP 1200 H-Type Hydraulic Drawing Press – 8-Guided General Description The CRONOSSTECH CHP series H-type hydraulic drawing presses are specially designed for deep drawing, forming, shaping, and heavy-duty pressing applications. The 8-guided H-frame construction provides maximum rigidity, stability, and precision under high tonnage. The CHP 1200 model offers reliable and long-lasting performance for industrial production lines requiring high force. The frame is stress-relieved by vibration methods, ensuring balanced distribution of loads during pressing while maintaining parallelism and perpendicularity tolerances. ⚙️ Standard Equipment Steel construction, 8-guided H-frame press design Vibration stress-relieved frame structure Bronze Zr14 slide bearings WPQR and WPS certified welding applications with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) Design and manufacturing complying with CE standards PLC-controlled hydraulic system Touch panel display (DELTA 7”) Adjustable ram stroke and tonnage control Automatic lubrication system Electronic filter contamination warning On-screen monitoring of hydraulic unit oil temperature and system status Cooling system Off-line filtration Safety systems for operator protection SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHP 1200 Type: Steel construction, 8-guided H-frame press design Frame Material: St52 – ERDEMİR Slide Bearing: Bronze Zr14 Capacity (Ram): 1200 Ton Movable Table Size: 1500 × 2000 mm Fixed Table Size: 1500 × 2000 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Ram Stroke: 1000 mm Min. Daylight: 100 mm Max. Daylight: 1100 mm Weld Stress Relief: Vibratory stress relief Welding Application: WPQR and WPS certified according to EN ISO 15614-1:2017, accredited by TÜRK-AK Max. Working Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Movable Table Rapid Descent: 150 mm/sec Movable Table Drawing Speed: 12 mm/sec Movable Table Return Speed: 170 mm/sec Main Cylinder Bore: Ø560 mm – Ck45 (2 units) Auxiliary Acceleration Cylinders: 2 units Approx. Height of the Press: 6100 mm Nodpfx Asx N T Ruoahjwb Approx. Width of the Press: 3550 mm Approx. Depth of the Press: 2400 mm Lower Table Height from Floor: 1450 mm Pre-fill Valve: NG 200 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Sensor: NOVATECHNIK or TURCK PLC System: DELTA Touch Panel Display: DELTA 7” Electrical Components: SIEMENS – SCHNEIDER Approx. Weight: 60 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Godina proizvodnje: 2025, pritiskna sila: 1.000 t, širina stola: 1.500 mm, duljina stola: 2.000 mm, hod klipa: 1.000 mm, radni tlak: 250 letva, Oprema: dokumentacija / priručnik, sigurnosna svjetlosna zavjesa, CRONOSSTECH CHP 1000 H-Type Single-Acting Hydraulic Press – 8-Guided General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are designed for high-tonnage sheet metal forming, deep drawing, straightening, and heavy-duty pressing applications. The 8-guided H-frame structure evenly distributes the high forces generated during pressing, providing maximum rigidity, precision, and long-lasting service life. The CHP 1000 model is developed to deliver reliable and stable performance for heavy industrial production lines. CHP Series – Structural Features CHP series presses are engineered with the conditions of heavy industry in mind. The body and main carrier structures are stress-relieved by vibration. Thanks to the Bronze Zr14 guide bushings, smooth load distribution and high precision are achieved throughout the ram travel. ⚙️ Standard Equipment - Steel construction H-type press frame with 8 guides - Stress-relieved frame via vibration - Bronze Zr14 guide bushings - WPQR & WPS certified welding applications with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacture in accordance with CE standards - PLC-controlled hydraulic system - 7” DELTA touchscreen panel - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - On-screen monitoring of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Two-hand control system - Light barrier (standard for operator safety) - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 1000 Type: Steel construction, 8-guided H-frame press Frame Material: St52 – ERDEMIR Guide Bushings: Bronze Zr14 Capacity (Ram): 1000 Tons Movable Table Dimensions: 1500 × 2000 mm Fixed Table Dimensions: 1500 × 2000 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 1000 mm Min. Daylight: 100 mm Max. Daylight: 1100 mm Stress Relief: Vibration stress relieving Welding Application: WPQR and WPS certified by TÜRK-AK, in accordance with EN ISO 15614-1/2017 Max. Working Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Movable Table Rapid Down Speed: 150 mm/s Nwodpfx Aajx N T Rboheb Movable Table Pressing Speed: 12 mm/s Movable Table Return Speed: 170 mm/s Main Cylinder Inner Diameter: Ø500 mm – Ck45 (2 units) Auxiliary Acceleration Cylinders: 2 units Approximate Press Height: 6000 mm Approximate Press Width: 3450 mm Approximate Press Depth: 2400 mm Table Height from Floor: 1450 mm Pre-fill Valve: NG 200 Hydraulic Power Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Transducer: NOVATECHNIK or TURCK PLC Application: DELTA Touchscreen Panel: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 55 tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Godina proizvodnje: 2025, pritiskna sila: 800 t, širina stola: 1.500 mm, duljina stola: 2.000 mm, hod klipa: 800 mm, radni tlak: 250 letva, Oprema: dokumentacija / priručnik, sigurnosna svjetlosna zavjesa, CRONOSSTECH CHP 800 H-Type Single-Acting Hydraulic Press – 8-Guided Slides General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are engineered for heavy-duty sheet metal forming, straightening, assembly, and high-tonnage pressing applications. The 8-slide H-frame structure ensures balanced distribution of the high forces generated during pressing, delivering maximum rigidity and long service life. The CHP 800 model has been developed to provide reliable and stable performance for high-capacity production lines. CHP Series – Structural Features CHP series presses are designed with heavy industry conditions in mind. The frame and main structural components are stress relieved by vibration. Bronze Zr14 slide bearings ensure even load distribution and precise operation throughout the ram movement. ⚙️ Standard Equipment - Steel construction, H-type press frame with 8 guide slides - Stress-relieved frame structure by vibration - Bronze Zr14 slide bearings - WPQR & WPS certified welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination alert - Real-time monitoring of hydraulic unit oil temperature and system status on display - Cooling system - Off-line filtration - Two-hand control system - Light curtain (standard for operator safety) - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 800 Nwodpox N T Nkjfx Aahsb - Type: Steel construction, H-type press frame with 8 guide slides - Frame Material: St52 – ERDEMİR - Slide Bearings: Bronze Zr14 - Capacity (Ram): 800 Ton - Moving Table Dimensions: 1500 × 2000 mm - Fixed Table Dimensions: 1500 × 2000 mm - Parallelism Tolerance: 120 micron/meter - Perpendicularity Tolerance: 60 micron/meter - Stroke (Ram): 800 mm - Min. Daylight Opening: 100 mm - Max. Daylight Opening: 900 mm - Welding Stress Relief: Vibration stress relief - Welding Application: WPQR and WPS certified by TÜRK-AK, EN ISO 15614-1:2017 (inspected by certified welding coordination engineers per EN ISO 14731) - Max. Working Pressure: 250 Bar - Total Motor Power: 75 kW – IE3 - Main Pump: 70 cm³ – REXROTH or PARKER - Moving Table Rapid Descent Speed: 150 mm/sec - Moving Table Drawing Speed: 12 mm/sec - Moving Table Return Speed: 170 mm/sec - Main Cylinder Inner Diameter: Ø390 mm – Ck45 (2 units) - Auxiliary Acceleration Cylinders: 2 units - Approximate Height: 6000 mm - Approximate Width: 3350 mm - Approximate Depth: 2700 mm - Bottom Table Height from Floor: 1450 mm - Pre-fill Valve: NG 200 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Position Sensor: NOVATECHNIK or TURCK - PLC Application: DELTA - Touch Panel Display: DELTA 7” - Switchgear Components: SIEMENS – SCHNEIDER - Approximate Weight: 45 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Godina proizvodnje: 2025, pritiskna sila: 600 t, širina stola: 1.200 mm, duljina stola: 1.500 mm, hod klipa: 800 mm, radni tlak: 250 letva, Oprema: dokumentacija / priručnik, sigurnosna svjetlosna zavjesa, CRONOSSTECH CHP 600 Njdpfex N T Iaex Aahewb H-Type Single-Acting Hydraulic Press – 8-Guided General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are industrial machines with high rigidity, developed for sheet metal forming, straightening, assembly, and heavy-duty pressing applications. The 8-guided H-frame structure ensures balanced distribution of high forces generated during pressing, providing long life and stable operation. The CHP 600 model is designed to deliver reliable performance for production processes that require high tonnage. CHP Series – Structural Features The CHP series presses are engineered with heavy-duty conditions in mind. The frame and supporting parts are stress relieved by vibratory methods. Bronze Zr14 guide bushings provide smooth load distribution and high precision throughout the ram stroke. ⚙️ Standard Equipment - Steel construction, 8-guided H-type press frame - Stress-relieved frame structure by vibration - Bronze Zr14 guide bushings - TÜRK-AK accredited WPQR & WPS approved welding applications (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - Real-time hydraulic unit oil temperature and system status monitoring on the display - Cooling system - Off-line filtration - Two-hand control system - Light curtain (operator safety standard) - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 600 Type: Steel construction, 8-guided H-frame press Frame Material: St52 – ERDEMİR Guide Bushing: Bronze Zr14 Capacity (Ram): 600 Ton Moving Table Size: 1200 × 1500 mm Fixed Table Size: 1200 × 1500 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 800 mm Min. Open Height: 100 mm Max. Open Height: 900 mm Stress Relief: By vibration Welding Application: WPQR & WPS certified by TÜRK-AK, EN ISO 15614-1:2017 welding application certificate (supervised by certified welding coordination engineers in accordance with EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 55 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Moving Table Fast Down Speed: 150 mm/s Moving Table Drawing Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Main Cylinder Inner Diameter: Ø550 mm – Ck45 Pot Cylinder Inner Diameter: Ø320 mm – Ck45 Auxiliary Acceleration Cylinders: 2 pcs Approx. Height of Press: 5900 mm Approx. Width of Press: 3250 mm Approx. Depth of Press: 2300 mm Bottom Table Height from Floor: 1400 mm Pre-fill Valve: NG 150 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Transducer: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel Display: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 28 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Godina proizvodnje: 2025, pritiskna sila: 500 t, širina stola: 1.200 mm, duljina stola: 1.500 mm, hod klipa: 1.000 mm, radni tlak: 250 letva, Oprema: dokumentacija / priručnik, sigurnosna svjetlosna zavjesa, CRONOSSTECH CHP 500 H-Type Single-Acting Hydraulic Press – 8-Guided General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are high-rigidity industrial press solutions developed for sheet metal forming, straightening, assembly, and die pressing applications. The 8-guide H-frame structure ensures balanced distribution of high loads generated during pressing, providing stable and repeatable operation. The CHP 500 model is designed for long-lasting and reliable performance in heavy-duty manufacturing processes requiring high tonnage. CHP Series – Structural Features CHP series presses are engineered with consideration for heavy-duty operations. The frame and supporting parts are stress-relieved by vibration method. Bronze Zr14 slide bearings provide smooth load distribution and extended precision along the ram travel. ⚙️ Standard Equipment - Steel construction, 8-guided H-frame press body - Stress-relieved frame and carrier parts by vibration - Bronze Zr14 slide bearings - WPQR & WPS certified welding applications, accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Machine structure designed and produced in compliance with CE standards - PLC-controlled hydraulic system - 7” DELTA touchscreen panel - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically controlled filter contamination warning - Hydraulic unit oil temperature and system status can be monitored on the screen - Cooling system Nwedsx N T H Aopfx Aahsb - Off-line filtration - Two-hand control system - Light curtain (standard for operator safety) - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 500 Type: Steel construction, 8-guided H-frame press type Frame Material: St52 – ERDEMİR Guide Bearing: Bronze Zr14 Capacity (Ram): 500 Ton Moving Table Dimensions: 1200 × 1500 mm Fixed Table Dimensions: 1200 × 1500 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Stroke (Ram): 1000 mm Min. Daylight: 100 mm Max. Daylight: 1100 mm Weld Stress Relief: By vibration Welding Application: WPQR and WPS certified by TÜRK-AK, with EN ISO 15614-1/2017 certification (supervised by certified welding coordination engineers according to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 45 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Moving Table Fast Down Speed: 150 mm/sec Moving Table Drawing Speed: 12 mm/sec Moving Table Return Speed: 170 mm/sec Main Cylinder Bore: Ø500 mm – Ck45 Auxiliary Acceleration Cylinders: 2 pcs Approximate Height of Press: 5800 mm Approximate Width of Press: 3250 mm Approximate Depth of Press: 2200 mm Lower Table Height from Floor: 1400 mm Pre-fill Valve: NG 150 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Transducer: NOVATECHNIK or TURCK PLC Application: DELTA Touchscreen Panel: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 23 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Godina proizvodnje: 2025, pritiskna sila: 400 t, širina stola: 1.200 mm, duljina stola: 1.500 mm, hod klipa: 800 mm, radni tlak: 250 letva, Oprema: dokumentacija / priručnik, sigurnosna svjetlosna zavjesa, CRONOSSTECH CHP 400 H-Type Single Acting Hydraulic Press – 8 Guideways General Description The CRONOSSTECH CHP series H-type single acting hydraulic presses are high-rigidity industrial press solutions developed for sheet metal forming, straightening, assembly, and die pressing applications. Thanks to the 8-guideway H-frame design, high loads generated during pressing are distributed evenly to ensure stable and repeatable operation. The CHP 400 model is engineered for heavy-duty operations requiring high tonnage, offering long-lasting and reliable performance. CHP Series – Structural Features CHP series presses are designed with heavy-duty conditions in mind. The frame and carrier components are stress-relieved by vibration. The bronze Zr14 guide bushings contribute to the long-term retention of precision by ensuring even load distribution during ram movement. ⚙️ Standard Equipment - Steel construction, H-type press frame with 8 guideways - Vibration stress-relieved frame and carrier components - Bronze Zr14 guide bushing - WPQR & WPS approved welding by TÜRK-AK accredited applications (EN ISO 15614-1:2017 / EN ISO 14731) - Machine structure designed and manufactured in compliance with CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - On-screen monitoring of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Two-hand control system - Light curtain (standard for operator safety) - SIEMENS – SCHNEIDER switching components 📐 Technical Specifications – CHP 400 - Type: Steel construction, H-frame with 8 guideways - Frame Material: St52 – ERDEMİR - Slide Bushing: Bronze Zr14 - Capacity (Ram): 400 tons - Movable Table Size: 1200 × 1500 mm - Fixed Table Size: 1200 × 1500 mm - Parallelism Tolerance: 120 microns/meter - Squareness Tolerance: 60 microns/meter - Stroke (Ram): 800 mm Nwsdpfx Asx N T Hpsahsb - Min. Daylight: 100 mm - Max. Daylight: 900 mm - Weld Stress Relieving: Vibration stress relieving - Welding: WPQR and WPS approved by TÜRK-AK accredited to EN ISO 15614-1:2017 (inspected by certified welding coordination engineers per EN ISO 14731) - Max. Working Pressure: 250 Bar - Total Motor Power: 37 kW – IE3 - Main Pump: 45 cm³ – REXROTH or PARKER - Movable Table Fast Approach Speed: 150 mm/sec - Movable Table Pressing Speed: 12 mm/sec - Movable Table Return Speed: 170 mm/sec - Main Cylinder Internal Diameter: Ø450 mm – Ck45 - Auxiliary Fast Advance Cylinders: 2 units - Approx. Press Height: 5600 mm - Approx. Press Width: 3250 mm - Approx. Press Depth: 2200 mm - Height of Lower Table from Floor: 1400 mm - Pre-fill Valve: NG 150 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Displacement Scale: NOVATECHNIK or TURCK - PLC Control: DELTA - Touch Panel Display: DELTA 7” - Switching Components: SIEMENS – SCHNEIDER - Approximate Weight: 19.5 tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Stanje: novo, Godina proizvodnje: 2025, pritiskna sila: 300 t, širina stola: 1.000 mm, duljina stola: 1.200 mm, hod klipa: 600 mm, radni tlak: 250 letva, Oprema: dokumentacija / priručnik, sigurnosna svjetlosna zavjesa, CRONOSSTECH CHP 300 H-Frame Single-Acting Hydraulic Press – 8 Slideways General Description The CRONOSSTECH CHP series H-frame single-acting hydraulic presses are high-rigidity industrial press solutions designed for sheet metal forming, straightening, assembly, and die pressing applications. The 8-slideway H-frame construction ensures even distribution of high loads generated during pressing, delivering stable and repeatable operation. The CHP 300 model is engineered for medium to high tonnage production processes, providing durable and reliable performance. CHP Series – Structural Features CHP series presses are engineered considering heavy-duty requirements. The frame and support components are stress-relieved by vibration. Bronze Zr14 slideway bushings enable even load distribution during ram movement, ensuring long-term retention of precision. ⚙️ Standard Equipment Steel construction, 8-slideway H-frame press body Stress-relieved frame and support parts by vibration Bronze Zr14 slideway bushings WPQR & WPS certified welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) Machine construction designed and manufactured to CE standards PLC-controlled hydraulic system Touch panel display (DELTA 7”) Adjustable ram stroke and tonnage control Automatic lubrication system Electronic filter contamination warning On-screen monitoring of hydraulic unit oil temperature and system status Cooling system Off-line filtration Two-hand control system Light curtain (standard for operator safety) SIEMENS – SCHNEIDER switching components 📐 Technical Specifications – CHP 300 Type: Steel construction, 8-slideway H-frame press body Frame Material: St52 – ERDEMİR Slideway Bushings: Bronze Zr14 Capacity (Ram): 300 Ton Moving Table Size: 1000 × 1200 mm Fixed Table Size: 1000 × 1200 mm Parallelism Tolerance: 120 micron/meter Squareness Tolerance: 60 micron/meter Ram Stroke: 600 mm Min. Daylight: 100 mm Max. Daylight: 700 mm Weld Stress Relief: Vibration stress relief Welding: WPQR & WPS certified welding accredited by TÜRK-AK, EN ISO 15614-1/2017 (Supervised by welding coordination engineers certified to EN ISO 14731) Max. Operating Pressure: 250 Bar Total Motor Power: 37 kW – IE3 Main Pump: 45 cm³ – REXROTH or PARKER Moving Table Fast Down Speed: 150 mm/s Moving Table Cushioning Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Main Cylinder Bore: Ø390 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approx. Press Height: 4400 mm Approx. Press Width: 3250 mm Approx. Press Depth: 2200 mm Lower Table Height from Floor: 1350 mm Pre-fill Valve: NG 150 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Sensor: NOVATECHNIK or TURCK PLC Unit: DELTA Touch Panel Display: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Nodpfx Aex N T E Esahjwb Approx. Weight: 10.5 Tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Stanje: novo, Godina proizvodnje: 2025, pritiskna sila: 250 t, širina stola: 1.000 mm, duljina stola: 1.200 mm, hod klipa: 600 mm, radni tlak: 250 letva, Oprema: dokumentacija / priručnik, sigurnosna svjetlosna zavjesa, CRONOSSTECH CHP 250 H-Type Single-Acting Hydraulic Press – 8 Guides General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are industrial press solutions with high rigidity, developed for sheet metal forming, straightening, assembly, and die pressing applications. Thanks to the 8-guide H-frame construction, loads generated during pressing are evenly distributed, ensuring stable and repeatable operation. The CHP 250 model is designed to deliver long-lasting and reliable performance for medium to high tonnage production processes. CHP Series – Structural Features CHP series presses are engineered for heavy-duty operation. The frame and support parts are stress-relieved using vibration methods. Bronze Zr14 guide bushings provide uniform load distribution during ram movement, contributing to long-term precision retention. ⚙️ Standard Equipment - Welded steel construction, H-type frame with 8 guides - Stress-relieved frame and support parts by vibration - Bronze Zr14 guide bushings - WPQR & WPS welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Machine construction designed and manufactured in compliance with CE standards - PLC-controlled hydraulic system - Touchscreen control panel (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically monitored filter clogging warning - Real-time hydraulic oil temperature and system status monitoring via screen Nwodex N T Elspfx Aahjb - Cooling system - Off-line filtration - Two-hand operation system - Light curtain (operator safety – standard) - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHP 250 - Type: Welded steel construction, H-frame with 8 guides - Frame Material: St52 – ERDEMİR quality - Guide Bushings: Bronze Zr14 - Capacity (Ram): 250 Ton - Movable Table Dimensions: 1000 × 1200 mm - Fixed Table Dimensions: 1000 × 1200 mm - Parallelism Tolerance: 120 micron/m - Perpendicularity Tolerance: 60 micron/m - Stroke (Ram): 600 mm - Min. Daylight: 100 mm - Max. Daylight: 700 mm - Stress Relieving: Vibratory stress relief - Welding Application: TÜRK-AK accredited WPQR & WPS per EN ISO 15614-1:2017, inspected by certified welding coordination engineers according to EN ISO 14731 - Max. Working Pressure: 250 Bar - Total Motor Power: 37 kW – IE3 - Main Pump: 45 cm³ – REXROTH or PARKER - Movable Table Rapid Down Speed: 150 mm/s - Movable Table Pressing Speed: 12 mm/s - Movable Table Return Speed: 170 mm/s - Main Cylinder Bore: Ø360 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 pcs - Approx. Press Height: 4200 mm - Approx. Press Width: 3250 mm - Approx. Press Depth: 2200 mm - Lower Table Height from Floor: 1350 mm - Pre-fill Valve: NG 125 - Hydraulic Power Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Position Transducer: NOVATECHNIK or TURCK - PLC Control: DELTA - Touchscreen Control Panel: DELTA 7” - Electrical Components: SIEMENS – SCHNEIDER - Approximate Weight: 9.5 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Godina proizvodnje: 2025, pritiskna sila: 200 t, širina stola: 800 mm, duljina stola: 1.000 mm, hod klipa: 600 mm, radni tlak: 250 letva, Oprema: dokumentacija / priručnik, sigurnosna svjetlosna zavjesa, CRONOSSTECH CHP 200 H-Type Single-Acting Hydraulic Press – 8-Guided Slides General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are industrial press solutions with high rigidity, developed for sheet metal forming, straightening, assembly, and die pressing applications. Thanks to their 8-guide H-frame structure, the loads generated during pressing are distributed evenly, ensuring stable and repeatable operation. The CHP 200 model is designed for reliable performance and long service life in medium to high-tonnage applications. CHP Series – Structural Features CHP series presses are engineered taking into account heavy-duty operating conditions. The frame and load-bearing parts are stress-relieved using vibration methods. Bronze Zr14 guide bushings ensure smooth ram motion and long-term precision. ⚙️ Standard Equipment Steel construction 8-guide H-type press frame Stress-relieved frame and load-bearing parts via vibration Bronze Zr14 guide bushings WPQR & WPS welding processes accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) Machine design and production in compliance with CE standards PLC-controlled hydraulic system Touchscreen panel (DELTA 7”) Adjustable ram stroke and tonnage control Automatic lubrication system Electronic filter contamination warning On-screen monitoring of hydraulic unit oil temperature and system statuses Nodpfex N T D Uex Aahowb Cooling system Off-line filtration Two-hand control system Light curtain (standard for operator safety) SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHP 200 Type: Steel construction, 8-guide H-frame press Frame Material: St52 – ERDEMİR Guide Bushings: Bronze Zr14 Capacity (Ram): 200 Ton Movable Table Dimensions: 800 × 1000 mm Fixed Table Dimensions: 800 × 1000 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Stroke (Ram): 600 mm Min. Clearance: 100 mm Max. Clearance: 700 mm Stress Relief: Vibration method Welding: WPQR and WPS certified by TÜRK-AK in line with EN ISO 15614-1/2017 (Supervised by certified welding coordination engineers according to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 22 kW – IE3 Main Pump: 32 cm³ – REXROTH or PARKER Movable Table Rapid Descent Speed: 150 mm/sec Movable Table Drawing Speed: 12 mm/sec Movable Table Return Speed: 170 mm/sec Main Cylinder Inner Diameter: Ø320 mm – Ck45 Auxiliary Acceleration Cylinders: 2 pcs Approximate Press Height: 3800 mm Approximate Press Width: 2950 mm Approximate Press Depth: 2200 mm Lower Table Height from Floor: 1350 mm Pre-fill Valve: NG 125 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Sensor: NOVATECHNIK or TURCK PLC Application: DELTA Touchscreen Panel: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approximate Weight: 8 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Godina proizvodnje: 2025, pritiskna sila: 150 t, širina stola: 800 mm, duljina stola: 1.000 mm, hod klipa: 500 mm, radni tlak: 250 letva, Oprema: dokumentacija / priručnik, sigurnosna svjetlosna zavjesa, CRONOSSTECH CHP 150 H-Type Single-Acting Hydraulic Press – 8 Guide Rails General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are industrial presses with a rigid steel construction, specially designed for sheet metal forming, straightening, assembly, and die pressing applications. Thanks to its H-frame structure with 8 guide rails, it ensures stable, balanced, and repeatable operation during pressing. The CHP 150 model has been developed for medium-duty applications, aiming for reliable performance and long service life. CHP Series – Structural Features CHP series presses are engineered considering heavy-duty operating conditions. The frame and bearing components are stress-relieved by vibration. Bronze Zr14 guide bushings offer smooth load transfer and long-term stable operation. ⚙️ Standard Equipment - Steel construction, H-type press frame with 8 guide rails - Stress-relieved frame and carrier parts via vibration - Bronze Zr14 guide bushings - WPQR & WPS certified welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Machine structure designed and manufactured in compliance with CE standards - PLC controlled hydraulic system - 7” DELTA touchscreen panel - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically monitored filter contamination warning - On-screen monitoring of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Two-hand control system - Light curtain (standard for operator safety) - SIEMENS – SCHNEIDER switching components 📐 Technical Specifications – CHP 150 Type: Steel construction, H-type press body with 8 guide rails Frame Material: St52 – ERDEMİR Guide Bushings: Bronze Zr14 Capacity (Ram): 150 Tons Moving Table Dimensions: 800 × 1000 mm Fixed Table Dimensions: 800 × 1000 mm Parallelism Tolerance: 120 micron/meter Squareness Tolerance: 60 micron/meter Ram Stroke: 500 mm Min. Daylight: 100 mm Max. Daylight: 600 mm Stress Relief: Vibration stress relief Nwedpfxjx N T Dzs Aahjb Welding Application: Welding application certified under WPQR & WPS, accredited by TÜRK-AK, with EN ISO 15614-1/2017 certification (Supervised by certified welding coordination engineers according to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 18.5 kW – IE3 Main Pump: 32 cm³ – REXROTH or PARKER Moving Table Fast Descent Speed: 150 mm/s Moving Table Drawing Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Main Cylinder Bore: Ø280 mm – Ck45 Approximate Press Height: 3650 mm Approximate Press Width: 2950 mm Approximate Press Depth: 2000 mm Bottom Table Height from Floor: 1250 mm Main Pre-fill Valve: NG 100 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Sensor: NOVATECHNIK or TURCK PLC Application: DELTA Touchscreen Display: DELTA 7” Switching Components: SIEMENS – SCHNEIDER Approximate Weight: 7 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Godina proizvodnje: 2025, pritiskna sila: 100 t, širina stola: 800 mm, duljina stola: 1.000 mm, hod klipa: 500 mm, radni tlak: 250 letva, Oprema: dokumentacija / priručnik, sigurnosna svjetlosna zavjesa, CRONOSSTECH CHP 100 H-Type Single-Acting Hydraulic Press – 8 Guideways General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are industrial presses designed for sheet metal forming, straightening, assembly, and die pressing applications, featuring a rigid steel frame. Thanks to its 8-guideway H-frame structure, it offers high stability and repeatable precision during pressing. Nedpfx Aajx N Tx Sohjwb CHP Series – Structural Features CHP series presses are engineered for heavy-duty applications. The frame and supporting components are stress-relieved by vibration. The bronze Zr14 material used in the slide bearings ensures long-lasting and stable operation. Key Advantages - 8-guideway H-frame design - Vibration stress-relieved steel structure - Welding operations in compliance with ISO standards - PLC-controlled operation with touchscreen interface - Design focused on operator safety and process stability ⚙️ Standard Equipment - Steel construction, 8-guideway H-type press frame - Vibration stress-relieved frame and support components - Bronze Zr14 slide bearings - WPQR & WPS approved welding (TÜRK-AK accredited), compliant with EN ISO 15614-1:2017 / EN ISO 14731 - Machine designed and manufactured in accordance with CE regulations - PLC-controlled hydraulic system - Touchscreen panel (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically monitored filter contamination warning - Hydraulic unit oil temperature and system status monitoring on-screen - Cooling system and off-line filtration - Two-hand control system - Light barrier (operator safety standard) - SIEMENS – SCHNEIDER switchgear 📐 Technical Specifications – CHP 100 Type: Steel construction, 8-guideway H-frame Frame Material: St52 – ERDEMİR Slide Bearing Material: Zr14 Bronze Capacity (Ram): 100 Ton Movable Table Dimensions: 800 × 1000 mm Fixed Table Dimensions: 800 × 1000 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 500 mm Min. Daylight: 100 mm Max. Daylight: 600 mm Weld Stress Relief: Vibratory stress relief Welding Certification: WPQR and WPS approved by TÜRK-AK, with EN ISO 15614-1/2017 certificate, supervised by welding coordination engineers certified per EN ISO 14731 Max. Working Pressure: 250 Bar Total Motor Power: 11 kW – IE3 Main Pump: 22 cm³ – REXROTH or PARKER Movable Table Fast Approach Speed: 150 mm/s Movable Table Pressing Speed: 12 mm/s Movable Table Return Speed: 170 mm/s Main Cylinder Bore: Ø230 mm – Ck45 Auxiliary Acceleration Cylinders: 2 pcs Approx. Height of Press: 3400 mm Approx. Width of Press: 2950 mm Approx. Depth of Press: 2000 mm Lower Table Height from Floor: 1250 mm Pre-fill Valve: NG 100 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Distance Encoder: NOVATECHNIK or TURCK PLC: DELTA Touchscreen Panel: DELTA 7" Switchgear: SIEMENS – SCHNEIDER Approx. Weight: 6.5 Ton Manufacturing Note This machine is manufactured by CRONOSSTECH in Turkey.