Ravna / ceradaFliegl
SDS 390 RoadRunner
Ravna / cerada
Fliegl
SDS 390 RoadRunner
EXW fiksna cijena bez PDV-a
9.900 €
Godina proizvodnje
2015
Stanje
Rabljeno
Lokacija
Triptis 

Pokaži slike
Prikaži kartu
Podaci o stroju
- Opis stroja:
- Ravna / cerada
- Proizvođač:
- Fliegl
- Model:
- SDS 390 RoadRunner
- Serijski broj:
- WFDFLT33902017848
- Godina proizvodnje:
- 2015
- Stanje:
- rabljeno
- funkcionalnost:
- potpuno funkcionalan
Cijena i lokacija
EXW fiksna cijena bez PDV-a
9.900 €
- Lokacija:
- Oberpöllnitzer Straße 8, 07819 Triptis, DE
Nazovi
Tehnički detalji
- Ukupna masa:
- 35.000 kg
- Masa praznog vozila:
- 6.537 kg
- Maksimalna nosivost:
- 28.463 kg
- Konfiguracija osovina:
- 3 osovine
- Duljina prostora za utovar:
- 13.650 mm
- Širina utovarnog prostora:
- 2.480 mm
- Visina utovarnog prostora:
- 2.790 mm
- Prva registracija:
- 10/2015
- Boja:
- srebrna
- Dimenzija gume:
- 385/65 r22.5
Detalji ponude
- ID broj oglasa:
- A9058631
- Referentni br.:
- 37357
- Zadnje ažurirano:
- dana 06.05.2025
Opis
Further information
Hnjdpfx Abokyrmij Tsu
Lightweight, fine-grain welded construction, fifth wheel plate with replaceable two kingpins, slightly sloped outer frame with load-lock profile for attaching tensioning straps (Note: To attach the straps in conjunction with side walls, the side walls must be opened). 24-ton, two-speed landing gear, single-sided operation, with a straight base, without thrust compensation, side door stays, wheel chocks with holders, pallet box for 32 Euro pallets (long version), ground clearance approx. 300 mm. Note: Free support leg corner dimension or free rearward swing radius approx. 1930 mm, quarter-shell mudguards in front of and behind the axle assembly, with anti-spray flaps only on the last axle, impact protection at the rear, pallet stops on both sides approx. 20-25 mm high, bolted version, loading height reduced by approx. 20-25 mm
BPW disc brake axles with 430 mm disc diameter, air suspension, 1st axle automatic lift axle, including forced lowering and traction assist, actuation of 3 brakes (with traction assist up to max. 25 km/h)
Floor: approximately 30 mm thick plywood panels, cross joints with omega inserts, on longitudinal beams for high point load capacity for forklift axle loads up to max. 7100 kg
Front bulkhead/corner pillars: 2480 mm high, steel corner pillars in volume design, release device for Side tarpaulin on the bulkhead, at a height of approximately 140 mm at the bottom inside, with steel bumper protection.
Roof: Sliding roof, rear end lift, can be folded up, with the roof sliding from the rear to the front, L-shaped roof rail for the automotive industry, interior width between the roof rails approximately 2,490 mm, tarpaulin color: white, lifting roof can be raised hydraulically by 400 mm using a hand pump on each corner post. Mobile with the lifting roof raised, adjustable upwards by 4 x 50 mm. Note the total height! Includes tarpaulin extension of 200 mm, only in conjunction with tarpaulin.
Oglas je automatski preveden i možda je došlo do nekih grešaka u prijevodu.
Hnjdpfx Abokyrmij Tsu
Lightweight, fine-grain welded construction, fifth wheel plate with replaceable two kingpins, slightly sloped outer frame with load-lock profile for attaching tensioning straps (Note: To attach the straps in conjunction with side walls, the side walls must be opened). 24-ton, two-speed landing gear, single-sided operation, with a straight base, without thrust compensation, side door stays, wheel chocks with holders, pallet box for 32 Euro pallets (long version), ground clearance approx. 300 mm. Note: Free support leg corner dimension or free rearward swing radius approx. 1930 mm, quarter-shell mudguards in front of and behind the axle assembly, with anti-spray flaps only on the last axle, impact protection at the rear, pallet stops on both sides approx. 20-25 mm high, bolted version, loading height reduced by approx. 20-25 mm
BPW disc brake axles with 430 mm disc diameter, air suspension, 1st axle automatic lift axle, including forced lowering and traction assist, actuation of 3 brakes (with traction assist up to max. 25 km/h)
Floor: approximately 30 mm thick plywood panels, cross joints with omega inserts, on longitudinal beams for high point load capacity for forklift axle loads up to max. 7100 kg
Front bulkhead/corner pillars: 2480 mm high, steel corner pillars in volume design, release device for Side tarpaulin on the bulkhead, at a height of approximately 140 mm at the bottom inside, with steel bumper protection.
Roof: Sliding roof, rear end lift, can be folded up, with the roof sliding from the rear to the front, L-shaped roof rail for the automotive industry, interior width between the roof rails approximately 2,490 mm, tarpaulin color: white, lifting roof can be raised hydraulically by 400 mm using a hand pump on each corner post. Mobile with the lifting roof raised, adjustable upwards by 4 x 50 mm. Note the total height! Includes tarpaulin extension of 200 mm, only in conjunction with tarpaulin.
Oglas je automatski preveden i možda je došlo do nekih grešaka u prijevodu.
Dobavljač
Napomena: Registrirajte se besplatno ili prijavite, za pristup svim informacijama.
Registran od: 2006
Predaj zahtjev
Telefon & Telefaks
+49 36482... oglasi
Vaš oglas je uspješno izbrisan
Došlo je do pogreške