HUNDEGGER K1-A timber framing machine (1999)

HUNDEGGER K1 - A

Description of Hundegger K1-A
Cjdpfj Ah Swwox Acyjhd
Equipment:
1. Cross-sections: 20 x 60 to 300 x 450 mm
2. Infeed cross conveyor: 7 strands, 2.2 m
3. Undercutting miter saw
4. Universal milling machine
- Roller cutter
- Finger cutter

5. Combination support for vertically operating tools
- 1 drilling unit
- 1 finger milling machine

6. Combination support for horizontally operating tools
- 1 drilling unit
- 1 slotting machine

7. Beam turning station, fully automatic
Machine installation:
8. Substrate, foundation:
- The base plate must have a thickness of at least 10 cm (with corresponding good reinforcement).
- This should be level and suitable for anchoring.

9. Energy requirements, type, quality, quantity:
09.1 Electrical:
- Voltage: 400/230 V, 3/N/PE
- Fuse rating: 3 x 63 A
- Frequency: 50 Hz
- Peak demand: 15 kW
- The mains voltage must be constant and uninterrupted within the specified tolerance range!

09.2 Compressed air:
- Flow rate: V < 600 l/min
- Pressure: Operating pressure p = 8.5 bar
- Maximum permissible pressure p = 10 bar

Important:
The control system was updated by Hundegger from MIPPS to CAN in autumn 2020.
Price ex works, location D-91154 Roth: 25,000.00 EUR

Oglas je automatski preveden. Moguće su pogreške u prijevodu.