Rabljeni Then - na prodaju (46)

Stanje: rabljeno, Kriogeni spremnik za plin, korišten za etilen (eten, C₂H₄) Lsdpfsx Hykcsx Ap Hjhh Izvoz iz EU. Imamo i druge spremnike za različite plinove – kontaktirajte nas za dodatne informacije.

Stanje: dobar (rabljeno), Godina proizvodnje: 2020, Pomaci X Y Z: 3200 x 1500 x 900 mm. Ledpfjzcv T Dex Ap Hehh B-os: +/- 120 stupnjeva, C-os: 370 stupnjeva, Brzina pomaka: 90 m/min, Brzina vretena: 24.000 o/min, Čahura vretena: HSK 63.

Godina proizvodnje: 2008, stanje: spreman za upotrebu (rabljeno), Funkcionalnost: potpuno funkcionalan, broj stroja/vozila: 09808, Na prodaju: Commandulli Athena CU 12 stroj za poliranje rubova – NETO 40.000 EUR Na prodaju: Commandulli Athena CU 12 stroj za poliranje rubova, godina proizvodnje 2008., neto cijena 40.000 EUR. Stroj je montiran, u radnom stanju, pouzdan i robustan. Godina proizvodnje: 2008. Cijena: 40.000 EUR neto Stanje: Sastavljen i operativan Značajke: Stabilna, robusna konstrukcija, izvrsne performanse Lhjdpfxoycvx Tj Ap Hoh Tip broj: 09808

Stanje: vrlo dobro (rabljeno), trajanje jamstva: 6 mjeseci, vrsta ulazne struje: Klima uređaj, minimalna temperatura okoline: 16 °C, električni osigurač: 16 A, ulazna struja: 2 A, ulazna frekvencija: 50 Hz, maksimalna temperatura okoline: 35 °C, ukupna duljina: 2.500 mm, ukupna širina: 754 mm, ukupna masa: 400 kg, potrošnja energije: 12 kWh, Oprema: rasvjeta, zamrzivač, Fun Ice SRL je predstavnik AHT-a u Rumunjskoj više od 25 godina AHT prodavač nove i rabljene opreme Brza dostava, širom svijeta AHT Kinley 210/250 cm (može kao zamrzivač ili hladnjak, srednja i niska temperatura) !!! Potpuno ispitan i kompletan sustav (baza + 2 reda polica) Rashladno sredstvo ECO R290 Spremno za priključivanje, jednostavna instalacija LED unutarnje svjetlo (LED nadstrešnica i LED osvjetljenje vrata) Nasumične jedinice na zalihi - AHT Kinley / Epta ili Carrier gornji zamrzivači na 210 cm i 250 cm duljine Može se kombinirati s AHT Miami ili Athen XL LED ormarićima (na skladištu u Oradei, Rumunjska) Lhodpfxsrhwuaj Ap Hjh Sva obnovljena oprema serije AHT EQ ima jamstvo od 6 (šest) mjeseci za dijelove, s izuzetkom potrošnog materijala i potrošnog materijala (rashladno sredstvo, brtve, neonske svjetiljke itd.) Svi dodaci i rezervni dijelovi na zalihi

Godina proizvodnje: 2021, stanje: novo, Funkcionalnost: potpuno funkcionalan, broj stroja/vozila: P210807601, 25 HL Centralno Inflacijska Membranska Preša N.1 “ATHENA 25” PNEUMATSKA CENTRALNA ELASTIČNA MEMBRANSKA PREŠA • Kapacitet spremnika: 25 hl • Elastična tubularna membrana od prirodne gume pogodna za prehrambene namjene, poduprta nosećim komponentama, debljine 9 mm • Potpuno perforirani spremnik od nehrđajućeg čelika • Ugrađeni kompresor zraka u preši • Dmuchač za brzo ispuhivanje membrane • Samokočioni zupčasti motor za rotaciju spremnika • Trofazno napajanje 380 V, 50 Hz; potrebna snaga 4 kW • Prijenos rotacije izveden pomoću vijenca, zupčanika i lanca • Klizna vrata, pneumatski upravljana, za ručno punjenje i pražnjenje komine • Aksijalni ulaz s ventilom od nehrđajućeg čelika, promjera 150 mm, DIN priključak • Fiksna posuda za skupljanje mošta s DIN priključkom 50 mm • Klizni središnji otvor za ispuštanje iscrpljenog proizvoda • Poklopac motornog prostora s dvoja vrata • Unutarnji transporteri za izbacivanje dropa • Stražnja vrata za inspekciju i pranje spremnika • Električni ormar s IP66 zaštitom • Tipkalo za ručne i hitne komande, s kabelom za upravljanje iz bilo kojeg dijela oko preše; ručne komande su elektromehaničke i nisu upravljane PLC-om, čime je osigurana mogućnost upravljanja prešom i u hitnim situacijama • Automatski ciklusi prešanja upravljani PLC-om i upravljačkim panelom s touch-screen u boji. Sustav je jednostavan za korištenje i fleksibilan, omogućuje: o Pregled parametara ciklusa i radnog statusa preše o Unos vlastitih programa o Posebne programe za jabuke i šipak o Opcije preskakanja faza za ubrzanje ciklusa ili ponavljanje faza prešanja o Automatsko upravljanje ispuštanjem iscrpljenog proizvoda o Odabir jezika korištenja iz izbornika • Glavne dimenzije: dužina: 4 m; širina: 1,65 m; visina: 2,05 m; masa: 1.300 kg • Kompletno izrađena od visokokvalitetnog AISI 304 nehrđajućeg čelika Lhjdpfx Apozbm Rdj Hjh Vrijeme prešanja: • Jabuke (usitnjene): 2 h - 4 h, ovisno o traženom prinosu i kvaliteti jabuka • Šipak: 1 h 30’ • Fermentirano grožđe: 50’ • Bijelo grožđe koje se lako preša: 1 h 15’ - 1 h 30’ • Bijelo grožđe teže za prešanje (tip Muscat): 2 h - 2 h 30’ * Vanjski sustav za pranje spremnika s visokotlačnim mlaznicama * Sustav kontrole razine spremnika s plovkom i upravljačem pumpe * IZDUŽENJE NOGU OD INOX AISI 304 – 500 MM (ODMAK OD TLA: 900 MM) PROIZVODNJA Kapacitet punjenja: • Jabuke (usitnjene): 2.150 – 2.850 kg • Šipak (oguljeni): 2.150 – 2.850 kg • Cijelo grožđe (punjenje kroz vrata): 1.700 – 2.100 kg • Cijelo grožđe (aksijalno punjenje): 2.400 – 3.000 kg • Odranjeno-usitnjeno grožđe: 4.300 – 5.700 kg • Fermentirano grožđe (kapacitet vinarstva): 100–125 hl

Stanje: rabljeno, Bertolaso Athena 40/8 Punilica za voćne sokove s podesivim zvjezdicama Ledpexytzxjfx Ap Hjhh Sastoji se od: - Vakuumskog punila s 40 ventila za punjenje - Navojnog čepa s 8 pozicija za 3 vrste zatvaranja: aluminijski navojni čep 28 TS RO PP (MCA28), VC 30x60 (BVS 30/60) i plastični navojni čep Pick & Place s pripremljenom magnetskom glavom od 38 mm

Stanje: rabljeno, Godina proizvodnje: 2006, Proizvođač: Robopac Model: Athena 5545 / Combi Lhjdsx R Dd Uepfx Ap Hjh Godina: 2006. Tip: Automatski shrink wrap uređaj u L-izvedbi i shrink tunel Dimenzije zavarivačke letve: 550 x 450 mm Dimenzije zavarivanja: 500 x 350 mm Minimalna veličina proizvoda: 50 x 50 x 20 mm Maksimalna visina proizvoda: 120 mm Širina rola folije: 600 mm Brzina transportera s upravljanjem inverterom: 10 – 40 m/min Proizvodni kapacitet: 30-35 paketa/min (ovisno o dimenzijama proizvoda i specifikacijama shrink folije) Snaga: 11 kW Stroj u radu: ?v=XY4arSTWZSs

Stanje: vrlo dobro (rabljeno), Godina proizvodnje: 2015, Robopac Athena Combi 5545 automatski stroj za omatanje termoskupljajućom folijom Automatski stroj za pakiranje Athena Combi temelji se na tehnologijama vrhunskih industrijskih strojeva. Zbog kontinuiranog razvoja proizvoda i istraživanja, Athena Combi pruža izvrsne performanse, svestranost i korisničko sučelje. Zbog izvanredne prilagodljivosti i točnosti stroja, omogućuje korištenje širokog spektra materijala za termoskupljajuće filmove. Lsdev D Ezispfx Ap Hehh Oprema također zadovoljava najstrože sigurnosne standarde. Proizvođač: Robopac Model: Athena Combi 5545 Godina: 2015 Dimenzije brtvene šipke DxŠ: 550x450 mm Maks. visina proizvoda: 120 mm Min. Dimenzije proizvoda DxŠxV: 50x20x20 mm Kapacitet: 30-35 paketa/minuti Maks. težina proizvoda: 120 kg. Snaga: 400V / 12kW / 50-60Hz Dimenzije stroja DxŠxV: 2.700x1.200x1.500 mm Težina stroja: 600 kg.

Stanje: vrlo dobro (rabljeno), Godina proizvodnje: 2017, Stratasys 3D printer PolyJet J750 The Stratasys J750 3D printer allows you to optimize and streamline the process of manufacturing models from different materials with a single build platform in one print job. During the design phase, individual parts of a model can be assigned specific colors. The model can then be saved as a VRML file and printed with the desired colors. Ongoing maintenance package included until June 2026, including spare parts. The Stratasys J750 3D Printer offers a build volume of 490 mm × 390 mm × 200 mm (19.3 × 15.35 × 7.8 in). Power supply 100–120 VAC, 50–60 Hz, 13.5 A, single-phase or 220–240 VAC, 50–60 Hz, 7 A, single-phase Technical details Overall length: 1,400 mm Overall height: 1,100 mm Overall width: 1,260 mm Input power type: AC (alternating current) Total weight: 430 kg Input voltage: 230 V Input current: 13 A Input frequency: 50–60 Hz Ambient temperature (min.): 18 °C Ambient temperature (max.): 25 °C Applications - Rapid prototyping - Concept models Lhjdpfx Aoyly Auop Hsh - Medical models - Production aids and jigs - Color textures

Stanje: rabljeno, CNC portal milling and drilling machine ANAYAK Type HVM-3800-P Bed type milling machine, design similar to a plate boring mill with a fixed table Machine No.: M-20021203 Year of manufacture: 2002 "Refurbished 2025" The machine will be fully workshop overhauled in 2025 and can then be inspected at our warehouse in 37235 Hessisch Lichtenau. Travels: X: 3200 mm, Y: 1200 mm, Z: 1500 mm Table size: 3800 x 1200 mm T-slots: 8 x 22 mm, 130 mm spacing Table load: max. 25 tons (fixed table – nearly unlimited load capacity) Spindle taper: ISO 50 (DIN69871-A) (drawbar bolt DIN 69872-B) Spindle speed: 60–4,000 rpm, stepless Feed speed: up to 10,000 mm/min, stepless Rapid traverse (X + Y): 20 m/min Rapid traverse (Z): 10 m/min Spindle drive: 22 / 30 kW Power supply: 400 Volt, 50 Hz, 50 kVA - Automatic tool changer for 30 tools - Spindle drive with 2 speed ranges - With automatic tool changer and tool magazine - Orthogonal milling head with hydro-mechanical tool clamping - Fully automatic swiveling orthogonal milling head in two 45° planes (B+C axis) - HEIDENHAIN iTNC 530 control, with electronic handwheel - Prepared for wireless probe system (probe and receiver not included) - Additional HF spindle 18,000 rpm – for mounting Lhjdpfoxcgtgox Ap Hjh - Freestanding electrical cabinet - Chip conveyor positioned between portal bed and machine table - 32,078 operating hours (displayed) - Coolant system - Freestanding hydraulic unit - Operating manual with circuit diagrams Machine footprint (L x W): approx. 1,000 x 700 cm Machine height: approx. 410 cm Weight (complete): approx. 33 tons Good condition

Stanje: gotovo kao novo (rabljeno), Godina proizvodnje: 2026, Funkcionalnost: potpuno funkcionalan, Cleanrooms & FFU Controls – Available Immediately at Attractive Prices! Looking for a professional cleanroom solution? Then you've come to the right place! We offer you high-quality cleanroom systems and control technology directly from our own stock – with no long lead times and at fair conditions. Filter Fan Unit (FFU) Controls – Get Yours Now! ✔ 10 units available immediately ✔ Includes digital control unit ✔ New – €1,000 per unit Your Cleanroom – Made to Your Specifications, Built to Your Requirements We design, deliver, and install your cleanroom – fully tailored to your needs. Our modular wall elements enable flexible room concepts with glazing and integrated ventilation technology. You can see the quality of our work in the photos – a successfully completed project for a client in the Netherlands. Unbeatable Value for Money: From just €500 – €750 per m² of floor area – incl. glazing, with a room height of 2,500 mm. Lodsrlm Rvspfx Ap Hehh Example: A 4 m × 4 m cleanroom costs as little as €8,000 net – turnkey and built to your specifications. Contact us today! We will quickly and easily prepare a customised offer – for any size. Your Impuls Engineering GmbH Team

Stanje: radionički obnovljen (rabljen), Godina proizvodnje: 2006, udaljenost pomaka osi X: 5.500 mm, pomak osi Y: 1.400 mm, pomak osi Z: 1.000 mm, maksimalna brzina vretena: 5.000 okr/min, brzina vretena (min.): 15 okr/min, širina stola: 1.200 mm, duljina stola: 6.000 mm, RepairFIT by Dornhöfer The Difference. Including installation & commissioning! Year of manufacture: 2006 Capacities / Travel paths: Longitudinal (X): 5,500 mm Vertical (Y): 1,400 mm Cross (Z): 1,000 mm Clamping table: Length: 6,000 mm Width: 1,200 mm Number of T-slots on the table surface: 12 pcs Width of T-slots: 22 mm Distance between T-slots: 100 mm Max. workpiece weight: 13,500 kg NC Rotary Table: Position: Right, flush integrated into table surface Clamping area: Ø 1,000 mm Positioning accuracy: 360x0.001° Max. workpiece weight: 3,500 kg Number of T-slots: 9 pcs Size of T-slots: 22 mm Distance between T-slots: 100 mm Paintwork: RAL 7035 light grey / RAL 5011 steel blue Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Main drive: Drive power: 100% duty cycle 28 kW Spindle speed range: Spindle speed: 15 - 5,000 rpm Torque: 815 Nm Feeds: X, Y, and Z axes: 2 – 10,000 mm/min Max. rapid traverse speed: X, Y, and Z axes: 25,000 mm/min Max. feed force: 10,000 N Footprint FLC6000: (approx.) 11.0 x 5.6 m Overall height: (approx.) 3.5 m Weight: approx. 35,000 kg HEIDENHAIN iTNC 530 HSCI Automatic MTE Universal Milling Head (Diagonal) Automatic Tool Changer Chip Conveyor Coolant system with 70 bar & through-spindle coolant (IKZ) Lhodey Tkgbepfx Ap Hoh RepairFIT is our proven solution for a profitable entry into our product range. The machines available in this line are sourced by us through a strict selection process and then undergo comprehensive inspection (deep-dive check). After thorough cleaning, any identified and obvious faults or defects are professionally repaired by our expert service team.

Stanje: gotovo kao novo (rabljeno), Funkcionalnost: potpuno funkcionalan, snaga: 11 kW (14,96 KS), visina rezanja (maks.): 115 mm, širina rezanja (maks.): 4.200 mm, vrsta podešavanja visine: električni, Oprema: CE oznaka, brzina vrtnje beskonačno podesiva, dokumentacija / priručnik, dozator, zaštita pile, SCHEER PA 7012PK – 4200 x 4200 mm As-new high-performance panel dividing saw with postforming unit, cross-cut saws, and vacuum loading LIKE NEW – DIRECT FROM MANUFACTURER – 1 year warranty Ledpfxoza Eazs Ap Hshh For sale is a powerful and fully-equipped SCHEER PA 7012PK panel dividing system featuring a cutting capacity of 4200 x 4200 mm. The system has been professionally overhauled and is ideally suited for industrial furniture and interior fit-out operations that require high levels of precision, performance, and automation. Specifications - Cutting length: 4,200 mm - Cutting height: 115 mm - Saw blade projection: 135 mm - Main saw motor: 11 kW - Scoring saw motor: 2.2 kW - Automatic cutting height adjustment - Residual cuts from 5 mm possible - Hardened guides - Automatic forward and return stroke of the saw unit - Main and scoring saw with integrated extraction - Fully automatic angle pressure system - Material feed HP 5107-4200 - Servo-driven material pusher - Feed speed up to 25 m/min - Return speed up to 50 m/min - 7 liftable clamping fingers - Closed Pertinax surface in the stop area - Air cushion table instead of rollers Control & Software with integrated industrial PC Highlights: - SSD hard drive - Linux operating system - Network capable (LAN/WLAN) - Remote maintenance via TeamViewer / Remote Desktop - Graphical cutting plan display - Multilingual user interface - 17" flat-panel display in swiveling operator console - Virtually unlimited cutting plan management - Optimization software OPTIMIN The integrated cutting plan optimizer enables direct creation and calculation of optimized cutting layouts on the machine. Part lists are entered and automatically converted into efficient cutting diagrams. Postforming unit - Integrated postforming device - Material height up to 80 mm Lift table TE 5085-4200 - Four-spindle lift table - Can be loaded from three sides - Table size: 4,200 x 2,200 mm - Stack height up to 650 mm - Motorized roller conveyors on right and left - Fully automatic alignment systems Longitudinal alignment WP 5035-4200 - Automatic positioning - Working area 2,000 – 4,200 mm Cross alignment WP 5034-4200 - Three alignment fingers - Working area 1,200 – 2,200 mm Front tables - Angle stop table HP 5094-2406 - 3 workpiece support tables HP 5095-2406 - Pertinax supports - Air cushion system LK 5162 for all front tables Cross-cut saws - Main cross-cut saw KS 5000-4200 - Fully automatic positioning - Adjustable range 300 – 2,100 mm - Extended travel range up to 3,100 mm - Power 7.5 kW - Integrated top and bottom extraction Additional cross-cut saw - Manually adjustable - Positioning 0 – 50 mm from stop edge - Power 7.5 kW Vacuum loading TE 5088-4200 Additional pusher with integrated short-stroke vacuum loader. Panels are automatically transferred from the lift table onto the pre-staging table and then fed into the machining process. This enables short cycle times and a high degree of automation. Summary Exceptionally rare and fully equipped industrial panel dividing system with extensive automation, postforming package, double cross-cut layout, and vacuum loading. Ideal for furniture manufacturing, shop fitting, interior finishing as well as larger joineries and woodworking shops. Machine available immediately – 1 year warranty.

Stanje: gotovo kao novo (rabljeno), Funkcionalnost: potpuno funkcionalan, Godina proizvodnje: 2022, Line for packaging multiple denominations in one bag (up to 8 different ones). It consists of 8 stations. Each station has a container for denominations that are brought to the counters by conveyors. At each station, the counter counts the set amount of denominations and prepares them in a tube. At regular intervals, the tubes are opened and the denominations are moved into the bag. The bag is then closed by thermal heating of the edge. The line is also equipped with a printer that allows printing on the bags as desired. Ljdpfx Apevt Sp Sj Hshh Please contact us for more technical details. L x W x H - 5000 x 5000 x 2700 mm

Stanje: generalno obnovljen (rabljeno), Godina proizvodnje: 2009, Funkcionalnost: potpuno funkcionalan, udaljenost pomaka osi X: 525 mm, pomak osi Y: 400 mm, pomak osi Z: 450 mm, masa obratka (maks.): 1.000 kg, visina obratka (maks.): 375 mm, OPS Ingersoll Gantry 500 Eagle sinker EDM machine, completely overhauled – excellent technical and visual condition The machine has been thoroughly and professionally overhauled in our facility and is in very good technical and visual condition. As part of the overhaul, the machine was disassembled by over 70%. All relevant wear parts were carefully inspected and replaced if necessary, including, among others, ball bearings and drive spindles. A complete geometric measurement and alignment were then performed, with additional verification using a laser measurement system. The machine bed and entire base were thoroughly cleaned. All pumps were dismantled, cleaned, and overhauled. All hoses, including hydraulic and compressed air hoses, were completely replaced. In addition, the machine was completely repainted and is also in outstanding visual condition. The generator and control unit were cleaned and technically inspected. The generator’s climate unit was also cleaned to ensure reliable cooling and stable operation. Ledpsyzw I Ijfx Ap Hshh Finally, the machine underwent comprehensive EDM testing according to OPS Ingersoll’s quality and inspection standards. The machine is immediately ready for use and ideally suited for reliable production operations. Technical Data: Manufacturer: Ingersoll (OPS Ingersoll) Type: Sinker EDM Machine Model: OPS INGERSOLL GANTRY EAGLE 500 Year of manufacture: 2009 Control: EAGLE Powertec PC/NC 2060 MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec Handheld – multifunctional manual control unit Manual EDM with Powertec Handheld High Speed Jump max. 18 m/min Generator output: 60 amps, EAGLE Powertec Travel distances (X, Y, Z): 525 x 400 x 450 mm Electrode changer: 20-position pick-up rotary changer Work tank (W x D x H): 770 x 670 x 440 mm Work table (W x D): 750 x 650 mm Load capacity: 1,000 kg Accessories: CO2 fire extinguishing system Integrated cartridge filter system Special Features: Linear measurement system in all axes (Z-axis standard equipment)

Stanje: generalno obnovljen (rabljeno), Godina proizvodnje: 2009, Funkcionalnost: potpuno funkcionalan, udaljenost pomaka osi X: 525 mm, pomak osi Y: 400 mm, pomak osi Z: 450 mm, masa obratka (maks.): 1.000 kg, visina obratka (maks.): 375 mm, OPS Ingersoll Gantry 500 Eagle sinker EDM machine, completely overhauled – excellent technical and visual condition The machine has been thoroughly and professionally overhauled in our facility and is in very good technical and visual condition. As part of the overhaul, the machine was disassembled by over 70%. All relevant wear parts were carefully inspected and replaced if necessary, including, among others, ball bearings and drive spindles. A complete geometric measurement and alignment were then performed, with additional verification using a laser measurement system. The machine bed and entire base were thoroughly cleaned. All pumps were dismantled, cleaned, and overhauled. All hoses, including hydraulic and compressed air hoses, were completely replaced. In addition, the machine was completely repainted and is also in outstanding visual condition. The generator and control unit were cleaned and technically inspected. The generator’s climate unit was also cleaned to ensure reliable cooling and stable operation. Ledpfjyrqpfjx Ap Hehh Finally, the machine underwent comprehensive EDM testing according to OPS Ingersoll’s quality and inspection standards. The machine is immediately ready for use and ideally suited for reliable production operations. Technical Data: Manufacturer: Ingersoll (OPS Ingersoll) Type: Sinker EDM Machine Model: OPS INGERSOLL GANTRY EAGLE 500 Year of manufacture: 2009 Control: EAGLE Powertec PC/NC 2060 MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec Handheld – multifunctional manual control unit Manual EDM with Powertec Handheld High Speed Jump max. 18 m/min Generator output: 60 amps, EAGLE Powertec Travel distances (X, Y, Z): 525 x 400 x 450 mm Electrode changer: 20-position pick-up rotary changer Work tank (W x D x H): 770 x 670 x 440 mm Work table (W x D): 750 x 650 mm Load capacity: 1,000 kg Accessories: CO2 fire extinguishing system Integrated cartridge filter system Special Features: Linear measurement system in all axes (Z-axis standard equipment)

Stanje: dobar (rabljeno), Godina proizvodnje: 2016, radni sati: 1.200 h, Funkcionalnost: potpuno funkcionalan, broj stroja/vozila: 90-0122-DDI-IR-INTE, ulazni napon: 415 V, ukupna duljina: 3.000 mm, ukupna širina: 1.000 mm, ukupna visina: 1.000 mm, vrsta ulazne struje: trofazni, godina zadnjeg generalnog remonta: 2026, širina transportne trake: 800 mm, Natgraph UV Tunnel – Year of Manufacture: 2016 For sale: Natgraph UV tunnel designed for integration with screen printing machines. The unit was manufactured in 2016 and is in very good technical condition. The tunnel is currently operational in production and runs seamlessly. Key features: - IR pre-heating section Lodpfx Asyuztgsp Hshh - 2 UV lamps with precise and independent control for each lamp - Integrated cooling section to reduce the temperature of sheets after curing - Automatic stacker for neat sheet stacking - Ready for integration with a screen printing machine - Lowerable table for easy operator access to the printing press The tunnel is used for curing UV inks in the screen printing process. Sheets pass through the IR section and then the UV lamp section, where the ink is cured quickly and evenly. Subsequently, sheets move through the cooling section and are automatically stacked by the stacker. Integration with a printing press is possible, ensuring consistent curing quality and high production efficiency. Equipment condition: Year of manufacture: 2016 Technical condition: very good In continuous production use Regularly serviced Set includes: - Natgraph UV tunnel - IR section - 2 UV lamps - Cooling section - Automatic sheet stacker ✔ Machine ready for operation ✔ Viewing during production possible

Stanje: novo, Godina proizvodnje: 2026, vrsta lasera: vlaknasti laser, snaga lasera: 12.000 W, FIBER CUT fiber laser cutting machines are revolutionary solutions in the laser cutting market. Innovative fiber laser technology enables significantly faster, more efficient, and cost-effective cutting of sheet metal components compared to CO2 lasers. These cutting machines are characterized by high speeds, efficiency, and exceptional cutting accuracy, ensuring unrivaled precision and repeatability. Our fiber lasers are primarily designed for processing materials such as: - Non-ferrous metals - Aluminum - Stainless steel - Carbon steel LASER POWER 12,000W CONSTRUCTION The frame of our laser is designed and manufactured in-house at our factory. The high-quality steel used in production is cut, then welded and subjected to precise machining. The entire frame, gantry, and gantry arms have additional ribbing, providing high rigidity and eliminating vibrations and deformations. DRIVES Our machines are powered by high-resolution, high-power Schneider AC servo motors (Y1Y2 x 2000W, x 1500W, Z 400W), which ensures proper acceleration and speed in all directions. Power transmission is achieved via top-quality planetary gearboxes. The X and Y axes use classic, proven helical racks, providing durability and precision. CUTTING HEAD The WSX liquid-cooled cutting head is used for sheet metal cutting. Lenses made from top-grade quartz glass focus the diffused laser beam on the material, ensuring high cutting accuracy. To ensure proper operation, the HSU system automatically adjusts the head height to account for material surface irregularities. A protective window between the nozzle and the lens protects the lens assembly from molten metal splatter. LASER SOURCE The Raycus Laser source used in the cutter features high electro-optical conversion efficiency, low power consumption, and high-quality beam output. It additionally allows for faster and more effective work, helping minimize operator errors. The source is also resistant to back reflection, i.e., beam return into the laser. Good power stability guarantees efficient operation with low energy consumption. COOLING SYSTEM Industrial S&A CWFL dual-temperature chillers are specially designed for cooling fiber lasers. They feature a range of alarms: compressor time delay protection, compressor overcurrent protection, water flow alarm, and high/low temperature alarms. EXCHANGEABLE WORKTABLE A rear-positioned exchangeable worktable minimizes laser downtime to a maximum. Automatic table exchange takes just 10 seconds, giving the operator time to remove cut parts and load a new metal sheet while the laser continues operating on the other table. This system ensures a very high production flow. AUTOMATIC LUBRICATION SYSTEM To keep the machine in good condition, racks and guides must be oiled every few days. The automatic system activates lubrication at preset intervals and in the correct amount, with all parameters set via software. Lodpfox Tpcbex Ap Hshh

Stanje: novo, Godina proizvodnje: 2026, vrsta lasera: vlaknasti laser, snaga lasera: 6.000 W, FIBER CUT laser cutting machines represent a revolutionary solution in the laser cutting market. The innovative fiber laser technology enables significantly faster, more efficient, and cost-effective cutting of sheet metal components compared to CO2 lasers. These machines are characterized by high speeds, productivity, and exceptional cutting accuracy, delivering unmatched precision and repeatability. Our fiber lasers are primarily designed for processing the following materials: - Non-ferrous metals - Aluminum - Stainless steel - Carbon steel SOURCE POWER 6000W CONSTRUCTION The frame of our laser has been designed and manufactured from scratch in our factory. The high-quality steel used to produce the machines is cut, welded, and then precisely machined. The entire frame, gantry, and gantry arms are additionally reinforced with ribs for maximum rigidity, eliminating vibrations and deformations. DRIVES Our machines are powered by high-resolution, high-power Schneider AC servo motors (Y1Y2 x 2000W, x 1500W, z 400W), which ensure proper acceleration and movement speed in each axis. Power transmission is realized through top-quality planetary gearboxes. In the X and Y axes, classic and proven helical racks are used, guaranteeing high durability and precision. CUTTING HEAD Sheet metal cutting is performed by a water-cooled WSX head. High-grade quartz glass lenses focus the laser beam precisely on the material, ensuring excellent cutting accuracy. The HSU system automatically adjusts the head height to compensate for material irregularities. The protective window, located between the nozzle and the lens, shields the lens assembly from molten metal splatter. LASER SOURCE The machine is equipped with a Raycus Laser source, offering high electro-optical conversion efficiency, low energy consumption, and excellent beam quality. This system allows for faster, more efficient operation and reduces operator error. The source is also resistant to back reflection, preventing the laser beam from returning into the source. Stable output power ensures efficient operation with low energy usage. COOLING Industrial S&A CWFL dual-temperature chillers are specifically designed for fiber laser cooling, featuring multiple alarm functions: compressor time delay protection, compressor overcurrent protection, water flow alarm, and high/low temperature warning. EXCHANGEABLE WORKTABLE Lodpfex Tn U Aex Ap Hjhh The exchangeable worktable, located at the rear of the machine, minimizes laser downtime. Automatic table exchange takes only 10 seconds, giving the operator time to remove cut parts and load new sheet metal while the laser processes on the other table. This system guarantees highly efficient production flow. AUTOMATIC LUBRICATION SYSTEM To maintain the machine in optimal condition, racks and guides must be lubricated with oil at least every few days. The automatic system initiates lubrication at preset intervals and in appropriate amounts, with all parameters configured in the software.

Stanje: novo, Godina proizvodnje: 2026, vrsta lasera: vlaknasti laser, snaga lasera: 6.000 W, FIBER CUT laser cutting machines represent a revolutionary solution in the laser cutting market. The innovative fiber laser technology enables significantly faster, more efficient, and cost-effective cutting of sheet metal components compared to CO2 lasers. These machines are characterized by high speeds, productivity, and exceptional cutting accuracy, delivering unmatched precision and repeatability. Our fiber lasers are primarily designed for processing the following materials: - Non-ferrous metals - Aluminum - Stainless steel - Carbon steel SOURCE POWER 6000W CONSTRUCTION The frame of our laser has been designed and manufactured from scratch in our factory. The high-quality steel used to produce the machines is cut, welded, and then precisely machined. The entire frame, gantry, and gantry arms are additionally reinforced with ribs for maximum rigidity, eliminating vibrations and deformations. DRIVES Our machines are powered by high-resolution, high-power Schneider AC servo motors (Y1Y2 x 2000W, x 1500W, z 400W), which ensure proper acceleration and movement speed in each axis. Power transmission is realized through top-quality planetary gearboxes. In the X and Y axes, classic and proven helical racks are used, guaranteeing high durability and precision. Lhodpfjx Tphwjx Ap Heh CUTTING HEAD Sheet metal cutting is performed by a water-cooled WSX head. High-grade quartz glass lenses focus the laser beam precisely on the material, ensuring excellent cutting accuracy. The HSU system automatically adjusts the head height to compensate for material irregularities. The protective window, located between the nozzle and the lens, shields the lens assembly from molten metal splatter. LASER SOURCE The machine is equipped with a Raycus Laser source, offering high electro-optical conversion efficiency, low energy consumption, and excellent beam quality. This system allows for faster, more efficient operation and reduces operator error. The source is also resistant to back reflection, preventing the laser beam from returning into the source. Stable output power ensures efficient operation with low energy usage. COOLING Industrial S&A CWFL dual-temperature chillers are specifically designed for fiber laser cooling, featuring multiple alarm functions: compressor time delay protection, compressor overcurrent protection, water flow alarm, and high/low temperature warning. EXCHANGEABLE WORKTABLE The exchangeable worktable, located at the rear of the machine, minimizes laser downtime. Automatic table exchange takes only 10 seconds, giving the operator time to remove cut parts and load new sheet metal while the laser processes on the other table. This system guarantees highly efficient production flow. AUTOMATIC LUBRICATION SYSTEM To maintain the machine in optimal condition, racks and guides must be lubricated with oil at least every few days. The automatic system initiates lubrication at preset intervals and in appropriate amounts, with all parameters configured in the software.

Stanje: gotovo kao novo (rabljeno), Godina proizvodnje: 2018, radni sati: 300 h, Funkcionalnost: potpuno funkcionalan, broj stroja/vozila: RA9VE021000061, ukupna masa: 2.000 kg, visina slaganja: 300 mm, vrsta ulazne struje: trofazni, ukupna širina: 1.600 mm, ukupna duljina: 7.000 mm, ukupna visina: 1.500 mm, ulazni napon: 400 V, ulazna struja: 16 A, Konica Minolta AccurioPress C3080 digital colour press, year 2018. The machine was initially used as a demo unit in a showroom, then taken over via a leasing contract in 2022. It was only operated briefly for several months before being decommissioned following a business closure. After shutdown, it was powered off, packed, protected, and stored under appropriate conditions. The latest counter, dated July 8, 2024, records 18,562 black & white copies and 494,520 colour copies, which are very low volumes relative to the capacity and nominal lifespan of this model. Lhedpfex Syghsx Ap Hjh It comes equipped, among others, with the following options and modules: DF-706 document feeder, EF-103 envelope kit, inspection lamp, HT-511 dehumidifying heater, MB-508 bypass tray, PF-707m air suction paper feed unit, HT-506 temperature regulator, FA-502 relay connector kit, FS-532 stapling finisher, PK-522 punching kit, HM-103 humidification unit, RU-518 relay unit, SD-513 saddle stitch/folding unit, TU-503 head and tail trimming module, CR-101 creasing kit, FD-504 spine press option, IQ-501 Intelligent Quality Optimizer, VI-511 and VI-509 interface kits, Fiery IC-313 print controller and Monitoring connectivity.