Univerzalni tokarski stroj

Weiler Matador VS2

Stanje: rabljeno, Godina proizvodnje: 1987, broj stroja/vozila: 7826, Ovaj WEILER – tokarilica Matador VS 2 prodaje se na našoj online industrijskoj aukciji / aukciji strojeva – rasprodaja zaliha Siemens Ruhstorf – mjerna tehnika, elektrotehnika, uredski namještaj, uredska oprema i još mnogo toga. Csdpfozg S Hyox Aczegw Ovu i mnoge druge pozicije pronaći ćete na našoj platformi.

Godina proizvodnje: 2012, stanje: radionički obnovljen (rabljen), Konvencionalni precizni tokarilica WEILER "CONDOR VC" Sa 3-osnim digitalnim prikazom Siemens Godina proizvodnje: 2012 Provrt glavnog vretena: 56 mm Cgedpexykz Asfx Aczew Razmak između šiljaka: 800 mm Promjer obratka nad posteljom: 205 mm Raspon broja okretaja: 30 – 3500 o/min Oprema: Multifix držač alata Zaštitni zid za strugotine s unutarnjim osvjetljenjem Sustav za hlađenje alata 3-čeljusna stezna glava Ø 200 mm Zaštita stezne glave Pratna luneta Ø cca 150 mm Konjić s izvlačivom bušačkom pinolom Upute za upotrebu

Stanje: spreman za upotrebu (rabljeno), Duljina tokarenja: 500 mm Promjer tokarenja nad postoljem: 297 mm Promjer tokarenja nad suportom: 160 mm Provrt vretena: 36,0 mm Prihvat prema DIN 55022 Gr. 5 Konus protivvretena: MK 3 Hod konusa: 90,0 mm Cgsdpfx Acoxq Hhyezew Broj okretaja vretena: 30 - 3550 o/min Brojevi okretaja motora: 1410 / 2830 o/min Ukupna priključna snaga: 3,3 kW Napon: 380 V Težina stroja cca 620 kg Dimenzije D-Š-V: 1420 x 700 x 1200 mm iz stručne škole – vrlo dobro stanje (!!) posobna posebno za precizne tokarske dijelove srednje veličine Oprema: - robusni tokarilica s navojnim i pogonskim vretenom - RÖHM stezna glava s 3 čeljusti Ø 160 mm - preklopna zaštita stezne glave - ključ za steznu glavu - MULTIFIX držač alata A, s 3 nova uloška - pomični konjić - zakretna strojna svjetiljka - upravljačka ploča, sprijeda lijevo - automatski pomaci za poprečni i gornji suport - strojno postolje s ormarićem (prostor za odlaganje) - stražnja zaštita protiv prskanja strugotina - tipka za hitno zaustavljanje - Upute za uporabu

Stanje: vrlo dobro (rabljeno), Funkcionalnost: potpuno funkcionalan, Weiler Matador VS-2 lead and feed screw lathe with 3-axis Heidenhain ND 780 digital display from training workshop!! Technical data: >> Machine number: 7702, year approx. 1990 >> Centre height: 140 mm >> Centre distance: 500 mm >> Speed range: 15 – 3550 rpm >> Spindle bore: 36 mm >> Short taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock Morse taper 3 >> Feeds from 0.012 to 0.9 mm/rev >> Thread cutting options: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.25 to 12 mm >> Brake motor Cjdpfx Acey T Hqcezsgw >> Weight approx. 700 kg >> Length: 1.4 m, Height: 1.2 m, Depth: 0.55 m Accessories and features: >> 3-axis Heidenhain ND 780 digital readout >> Quick-clamping device, internal and external collets (see photo) >> 1 three-jaw chuck with 3 sets of jaws >> Multifix size A with 3 tool holders >> Spindle guard >> 1 bed stop >> Change gears >> Machine feet About the machine: For sale is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional. The slides all move smoothly and evenly. Even at high speeds, the Weiler runs quietly. The original location was a training workshop. The machine is equipped with a comprehensive range of accessories. Take the opportunity to view this machine under power on-site and see its excellent condition for yourself.

Stanje: rabljeno, Godina proizvodnje: 1987, x-hod 500 mm y-hod 380 mm z-hod 300 mm FANUC kontrola Ukupna potrebna snaga 12 kW Težina stroja cca 2300 kg Potreban prostor cca S T A M A (FANUC) Vertikalni 3-osni CNC obradni centar Tip MC 010 Godina proizvodnje 1987 # KMH 010 1110 _____ Radni raspon: Uzdužni hod X-osi 500 mm Vertikalni hod Z osi 300 mm Križni hod Y osi 380 mm Veličina stola / radne površine 650 x 380 mm Nosivost stola cca 200 kg Ugradbena visina između stola/vretena 240-540 mm Projekcija na središte vretena cca 350 mm Držač alata SK 30 Cgjdpfx Acst Hw H Ejzew Broj okretaja vretena 1.500 - 6.000 o/min Vrijednosti posmaka / brzi hod do 1.000-4.000 m / 15 m/min. Učinak bušenja/glodanja u St 20 mm / 130 cm³ Glodanje u aluminiju 500 cm3 AC glavni pogon cca 3,7 / 5,5 kW Ukupni pogon cca 12 kW - 380 V - 50 Hz Težina cca 2.300 kg Pribor / posebna oprema: • Originalna FANUC kontrola sa zaslonom i sa svime moderni podprogrami, dijagnoza grešaka, elektronski ručni kotač, RS 232, lako i brzo programirati, izravno na stroju itd. • Vertikalni revolver s 10 pozicija alata ISO 40, brz Vrijeme izmjene cca. 7 sekundi čip do čipa, • Kontrolirani rotacijski stol je izgrađen na stolu (bez CNC osi) Idealan kao rotacijski stol za indeksiranje, hidraulički, tip RST 2 • Odvojeni sustav rashladnog sredstva, • razni držači alata sa i bez alata Idealan stroj za produktivno bušenje, narezivanje navoja i glodanje u čeliku i aluminij Stanje: dobro do vrlo dobro – spremno za demonstraciju pod napajanjem, Isporuka: odmah sa skladišta, utovareno na kamion Plaćanje: isključivo neto - po primitku računa Tražimo vašu narudžbu. U stalnom stanju imamo veliki izbor svih vrsta CNC obradnih centara Skladištenje – pitajte za alternative!

Stanje: vrlo dobro (rabljeno), Godina proizvodnje: 1988, Funkcionalnost: potpuno funkcionalan, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-axis Elesta Digital Readout from Training Workshop!! Technical Data: >> Machine No. 88-8115 Year of manufacture: 1988 >> Centre height: 140 mm >> Distance between centres: 500 mm >> Spindle speed: 15 – 3550 rpm >> Spindle bore: 36 mm >> Short taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock: Morse taper 3 >> Feeds from 0.012 to 0.9 mm/rev >> Threading options: metric, imperial, module, and diametral pitch threads >> Metric thread pitches from 0.25 to 12 mm >> Braked motor >> Weight: approx. 700 kg Cjdpfsy Tmkvex Aczegw >> Length: 1.4 m, height: 1.2 m, depth: 0.55 m Included accessories and equipment: >> 3-axis Elesta digital readout >> Quick clamping device for internal and external collets (see photo) >> 1 piece 3-jaw chuck, 1 set of jaws >> Multifix size A with 3 tool holders >> Spindle guard >> 1 bed stop >> Change gears >> Travelling steady >> Machine feet About the machine: Offered here is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional. All slides operate smoothly and evenly. The Weiler also runs quietly at high speeds. The original location of the machine was a training workshop. It comes with a comprehensive set of accessories. Take this opportunity to inspect the machine under power on site and see the excellent condition for yourself.

Stanje: vrlo dobro (rabljeno), Godina proizvodnje: 1992, Funkcionalnost: potpuno funkcionalan, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C, NEW, in Special Light Grey Paint Finish!!! Technical Data: >> Machine No. 92-027, Year of Manufacture: 1992 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speed: 15 to 3550 rpm >> Spindle bore: 36 mm >> Short-taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock Morse taper 3 >> Feeds from 0.012 to 0.9 mm/rev >> Thread cutting: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 12 mm >> Weight approx. 700 kg >> Dimensions: Length 1.4 m, Height 1.2 m, Depth 0.55 m Accessories and Equipment: >> 3-axis digital readout system by K&C, new, with 12-month manufacturer’s warranty and operation manual Functions: Switching mm/inch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, direction switching >> 1 three-jaw chuck with 1 set of jaws >> 1 four-jaw chuck with 1 set of jaws >> Electronic spindle protection >> Multifix size A with 2 tool holders >> Motor brake >> Bed stop Cedpsyylq Uofx Aczegw About the Machine: Offered is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional and has been freshly repainted in light grey. A very nice machine. The K&C 3-axis digital readout system has been retrofitted. All scales are new and are equipped with covers to protect them from dirt. All slides move smoothly and evenly. Take the opportunity to inspect this machine under power on site and see its condition for yourself.

Stanje: spreman za upotrebu (rabljeno), Godina proizvodnje: 2015, radni sati: 12.244 h, maksimalna brzina vretena: 4.500 okr/min, udaljenost pomaka osi X: 275 mm, pomak osi Z: 700 mm, snaga motora vretena: 11.000 W, ukupna visina: 1.620 mm, ukupna masa: 4.200 kg, proizvođač kontrolera: SIEMENS, model upravljača: 840D-SolutionLine, broj mjesta u spremniku alata: 16, broj osovina: 2, Ovaj dvoosni horizontalni tokarski stroj SPINNER TC 600-65MC proizveden je 2015. godine, a opremljen je upravljačkim sustavom Siemens 840D i indeksnom kupolom sa 16 pozicija. Uključuje glavno vreteno s brzinom do 4000 okretaja u minuti i snagom od 24 kW. Stroj nudi promjer zamaha iznad kreveta od 425 mm i maksimalni promjer tokarenja od 310 mm. Razmislite o kupnji ovog horizontalnog tokarskog stroja SPINNER TC 600-65MC. Kontaktirajte nas za više informacija o ovom stroju. Dodatna oprema • Potpuna zaštitna obloga od prskanja + rashladna jedinica • Rasvjeta radnog prostora + pneumatska oprema • Panoramski prozor za optimalnu vidljivost radnog područja Prednosti stroja Cedpfxox D E Hne Aczegw Tehničke prednosti stroja • Središnja udaljenost: cca. 600 mm • Maks. Promjer tokarenja: 310 mm • Okretni moment: glavno vreteno (fanuc, s6 40%) 178 nm, glavno vreteno (siemens, s6 40%) 301 nm • Hod pinole: 120 mm • Hod podešavanja: 475 mm • Brzina rotirajućih alata: 6000 1/min • Snaga pogonjenog alata: (fanuc, 30 min) 3,7 kw, (siemens, 40%) 6,0 kw Dodatne informacije Medij Pneumatika maks. radni tlak: 10 bar Normalni tlak: 6 bar Hidraulika maks. radni tlak: 30 bar Upravljačka jedinica Upravljački sustav: Standardni Siemens 840D, opcija Fanuc 21i Radni napon: 400 V Frekvencija mreže: 50/60 Hz Upravljački napon: 24 V DC Sučelja: USB, Ethernet, SPINNER-UNIMAG pomicanje šipke (električno) Technical Specification Through-spindle Coolant No Counter Spindle No Driven Tools Yes Taper Size VDI 30

Stanje: vrlo dobro (rabljeno), Godina proizvodnje: 1992, Funkcionalnost: potpuno funkcionalan, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C (NEW), in Special Light Grey Paint Finish!!! Technical Specifications: >> Machine No.: 92-029, Year of Manufacture: 1992 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speed: 15 – 3550 rpm >> Spindle bore: 36 mm >> Short taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock: MT 3 >> Feeds: 0.012 to 0.9 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch >> Metric thread pitches: 0.25 to 12 mm >> Weight: approx. 700 kg >> Length: 1.4 m, Height: 1.2 m, Depth: 0.55 m Accessories and Equipment: >> 3-axis digital readout by K&C (new) with 12 months manufacturer's warranty and user manual. Functions include: mm/inch switching, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, counting direction switching >> 1x 3-jaw chuck, 1 set of jaws >> 1x 4-jaw chuck, 2 sets of jaws >> Electronic spindle protection >> Multifix toolpost size A, incl. 2 tool holders Cjdpoyylqhjfx Aczogw >> Motor brake >> Bed stop About the Machine: Offered here is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional and has been newly painted in light grey. This is a very attractive machine. The 3-axis digital readout from K&C has been retrofitted. All scales are new and equipped with cover strips to protect them from dirt. All carriage movements are smooth and uniform. Take the opportunity to inspect this machine under power at our site and see the condition for yourself.

Stanje: vrlo dobro (rabljeno), Godina proizvodnje: 1992, Funkcionalnost: potpuno funkcionalan, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C, NEW, in Special Light Grey Finish!!! Technical Data: >> Machine No. 92-028, Year of Manufacture 1992 >> Centre Height: 140 mm >> Centre Distance: 500 mm >> Spindle Speed: 15 – 3550 rpm >> Spindle Bore: 36 mm >> Short Taper Spindle Nose DIN 55022-5 with bayonet locking >> Tailstock Morse Taper 3 >> Feeds from 0.012 to 0.9 mm/rev >> Thread Cutting: Metric, Inch, Module, and Diametral Pitch >> Metric Thread Pitches from 0.25 to 12 mm >> Weight approx. 700 kg >> Length 1.4 m, Height 1.2 m, Depth 0.55 m Csdoyyb T Sopfx Aczjgw Accessories and Equipment: >> 3-axis digital readout by K&C, new, 12 months manufacturer's warranty, with operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference mark, tool memory for 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching >> 1 Piece 3-jaw chuck incl. 1 set of jaws >> 1 Piece 4-jaw chuck incl. 1 set of jaws >> Electronic spindle protection >> Multifix Size A with 2 steel tool holders >> Motor brake >> Bed stop About the Machine: For sale is a Weiler Matador VS-2 in very good condition. The machine is fully functional and has been newly painted in light grey. A very attractive machine. The 3-axis digital readout from K&C has been retrofitted. All scales are new and feature protective covers to prevent contamination. All carriages move smoothly and evenly. Take the opportunity to view this machine under power on site and see the condition for yourself.

Stanje: rabljeno, Godina proizvodnje: 1986, broj stroja/vozila: 275590, Tehnički podaci: - Kapacitet bušenja: 25 mm Cedsyf Ehiepfx Aczjgw - Prihvat vretena za bušenje: MK 3 - Brzine vrtnje vretena za bušenje: 100 / 205 / 345 / 440 o/min; 695 / 885 / 1450 / 2900 o/min - Hod bušilnog vretena: 130 mm - Izlet vretena za bušenje: 260 mm - Koordinatni stol s 3 T-utora: 580 x 240 mm - Pomak stola: X-os 415 mm, Y-os 155 mm - Pogon: 400 V / 0,75 / 0,9 kW - Potreban prostor: cca. Š 900 x V 1800 x D 700 mm - Težina: cca. 270 kg - Strojna stega