Rabljeni H Tip 500 T Eksentrična Presa na prodaju (111.239)

Stanje: novo, Godina proizvodnje: 2025, pritiskna sila: 500 t, hod klipa: 200 mm, širina stola: 1.200 mm, duljina stola: 2.200 mm, trajanje jamstva: 24 mjeseci, Oprema: sigurnosna svjetlosna zavjesa, Ekscentrična preša je tip mehaničke preše koja se koristi u operacijama hladnog oblikovanja kao što su bušenje, rezanje i oblikovanje pomoću kalupa, a radi na principu sile generirane putem ekscentričnog mehanizma. H-tip (straight-side) ekscentrične preše zahvaljujući krutoj konstrukciji osiguravaju visoku stabilnost i sigurnost procesa pri upotrebi velikih stolova i teških kalupa. CRONOSSTECH CEHP 500 – H Tip Ekscentrična Preša 500 tona dizajnirana je za stabilan rad u serijskoj proizvodnji s naglaskom na zaštitu kalupa i sigurnost operatera. Monoblok kućište, sustav klizača s osam ležajeva, hidraulična prenaponska zaštita i automatski sustav podmazivanja jamče pouzdan rad u uvjetima kontinuirane proizvodnje. Glavne prednosti: - Stabilan rad s velikim kalupima zahvaljujući površini stola 2200×1200 mm - Zaštita kalupa/opreme putem hidrauličnog osigurača protiv preopterećenja - Precizno vođenje pomoću osam ležajeva na klizaču i balancer klipa - Kontrolirano i korisniku prilagođeno upravljanje putem PLC-a i dodirnog ekrana - Visoka sigurnost operatera pomoću fotoćelijske zaštitne zavjese Područja primjene: - Operacije bušenja, rezanja i oblikovanja koje zahtijevaju veliki radni stol - Serijska proizvodnja s automatskim linijama za dovod materijala - Procesi s teškim kalupima i proizvodnjom velikih toniranja ✅ STANDARDNE ZNAČAJKE: • Čelična konstrukcija kućišta • Pneumatska spojka/kočnica • Dodatna ploča s T-utorima • Klizač s 8 ležajeva • Podesiv hod na jednostrukoj ručici • Balancer klip na klizaču • Potpuno automatski sustav ulja za fino podmazivanje • PLC upravljački sustav • Kontrolna ploča tipa klavir • Dodirni LCD ekran • Reversibilni motor • Hidraulična sigurnosna zaštita od preopterećenja • Motorizirani mehanizam za namještanje klizača Ljdpfx Asx N R Ahsh Dsaf • Fotoćelijska zaštitna zavjesa • Zupčasti sklop u zatvorenoj uljnoj kupki • Dvostruki sigurnosni ventil • Usklađenost s CE standardima ✅ OPCIJSKE ZNAČAJKE: • Sustavi za dovod materijala za prešu • Sustavi za izbacivanje otpadnog materijala • Klizna zaštitna vrata ispred stola • Kalup prema željenim specifikacijama ✅ TEHNIČKE SPECIFIKACIJE (CEHP 500): Kapacitet: 500 tona Udaljenost stol – klizač: 500 mm Širina između stupova: 2330 mm Namještanje klizača: 120 mm Širina preše: 2900 mm Dubina preše: 3350 mm Visina preše: 5000 mm Dimenzije stola: 2200×1200 mm Dimenzije klizača: 2200×1200 mm Hod (fiksni): 200 mm Snaga motora: 75 kW Težina: 68.000 kg ✅ NAPOMENA O PROIZVODNJI / NABAVI: Ovaj stroj proizvodi CRONOSSTECH u Turskoj. Prodaju, puštanje u pogon i postprodajne aktivnosti provodi CRONOSSTECH.

Stanje: novo, Godina proizvodnje: 2025, pritiskna sila: 500 t, hod klipa: 1.000 mm, širina stola: 1.200 mm, duljina stola: 1.500 mm, radni tlak: 250 letva, Oprema: dokumentacija / priručnik, sigurnosna svjetlosna zavjesa, CRONOSSTECH CHP 500 H-Type Single-Acting Hydraulic Press – 8-Guided General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are high-rigidity industrial press solutions developed for sheet metal forming, straightening, assembly, and die pressing applications. The 8-guide H-frame structure ensures balanced distribution of high loads generated during pressing, providing stable and repeatable operation. The CHP 500 model is designed for long-lasting and reliable performance in heavy-duty manufacturing processes requiring high tonnage. CHP Series – Structural Features CHP series presses are engineered with consideration for heavy-duty operations. The frame and supporting parts are stress-relieved by vibration method. Bronze Zr14 slide bearings provide smooth load distribution and extended precision along the ram travel. ⚙️ Standard Equipment - Steel construction, 8-guided H-frame press body - Stress-relieved frame and carrier parts by vibration - Bronze Zr14 slide bearings - WPQR & WPS certified welding applications, accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Machine structure designed and produced in compliance with CE standards - PLC-controlled hydraulic system - 7” DELTA touchscreen panel - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically controlled filter contamination warning - Hydraulic unit oil temperature and system status can be monitored on the screen - Cooling system - Off-line filtration - Two-hand control system - Light curtain (standard for operator safety) - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 500 Type: Steel construction, 8-guided H-frame press type Frame Material: St52 – ERDEMİR Guide Bearing: Bronze Zr14 Capacity (Ram): 500 Ton Moving Table Dimensions: 1200 × 1500 mm Fixed Table Dimensions: 1200 × 1500 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Stroke (Ram): 1000 mm Min. Daylight: 100 mm Max. Daylight: 1100 mm Weld Stress Relief: By vibration Welding Application: WPQR and WPS certified by TÜRK-AK, with EN ISO 15614-1/2017 certification (supervised by certified welding coordination engineers according to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 45 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Moving Table Fast Down Speed: 150 mm/sec Moving Table Drawing Speed: 12 mm/sec Moving Table Return Speed: 170 mm/sec Main Cylinder Bore: Ø500 mm – Ck45 Auxiliary Acceleration Cylinders: 2 pcs Approximate Height of Press: 5800 mm Approximate Width of Press: 3250 mm Approximate Depth of Press: 2200 mm Lower Table Height from Floor: 1400 mm Lsdpfxex N T H As Ah Doaf Pre-fill Valve: NG 150 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Transducer: NOVATECHNIK or TURCK PLC Application: DELTA Touchscreen Panel: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 23 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Godina proizvodnje: 2025, pritiskna sila: 1.500 t, hod klipa: 1.000 mm, širina stola: 1.500 mm, duljina stola: 2.400 mm, sila povlačenja: 500 t, radni tlak: 250 letva, Oprema: dokumentacija / priručnik, sigurnosna svjetlosna zavjesa, CRONOSSTECH CHSP 1500/500 H-Type Hydraulic Deep Drawing (Forming) Press – 8 Guideways General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are designed to provide maximum frame rigidity, precise parallelism, and long-lasting operation for deep drawing applications that require very high tonnage and large platen dimensions. The 8-guideway H-frame construction ensures controlled and stable ram and platen movements throughout the pressing process. The CHSP 1500/500 model is specifically developed for large-sized molds, deep drawing, and controlled forming operations, boasting a 1500-ton main ram and 500-ton cushion capacity. The vibration-stress-relieved welded steel construction offers high strength and reliability even in the harshest heavy industry conditions. ⚙️ Standard Equipment • Welded steel construction, 8-guideway H-frame body • Vibration-stress-relieved frame structure • Bronze Zr14 slideway bearings • WPQR and WPS certified welding, TÜRK-AK accredited (EN ISO 15614-1:2017 / EN ISO 14731) • PLC-controlled hydraulic system • Touchscreen control panel (DELTA 7”) • Adjustable stroke control for ram and cushion • Adjustable tonnage (pressure) control for ram and cushion • Automatic lubrication system • Electronic filter contamination warning system • Hydraulic unit oil temperature and system status monitoring via panel • Off-line filtration and industrial cooling system • SIEMENS – SCHNEIDER switchgear • Industrial-grade safety systems for operator protection 📐 Technical Specifications – CHSP 1500/500 Type: Welded steel construction, 8-guideway H-frame Frame Material: St52 – ERDEMİR Slideway Bearings: Bronze Zr14 Capacity (Ram / Cushion): 1500 / 500 Ton Movable / Fixed Table: 1500 × 2400 mm Parallelism / Perpendicularity: 120 / 60 micron/meter Stroke (Ram / Cushion): 1000 / 350 mm Daylight Opening (Min / Max): 200 / 1200 mm Max. Working Pressure: 250 Bar Total Motor Power: 90 kW – IE3 Main Pump: 101 cm³ – REXROTH or PARKER Main Cylinder: Ø620 mm – Ck45 (2 units) Cushion Cylinder: Ø360 mm – Ck45 (2 units) Pre-Fill Valve: NG 200 PLC / Panel: DELTA / DELTA 7” Approximate Weight: 87 Ton Laodox N Ukispfx Ah Def Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Godina proizvodnje: 2025, pritiskna sila: 400 t, hod klipa: 200 mm, širina stola: 1.200 mm, duljina stola: 2.000 mm, trajanje jamstva: 24 mjeseci, Oprema: sigurnosna svjetlosna zavjesa, Ekscentrična preša je vrsta mehaničke preše koja koristi silu proizvedenu ekscentričnim mehanizmom u hladnim postupcima oblikovanja kao što su bušenje, rezanje i prešanje oblika. H tip (ravni bok, straight-side) ekscentrične preše zahvaljujući krutoj konstrukciji okvira osiguravaju visoku stabilnost i sigurnost procesa u primjenama sa širokom radnom pločom i teškim alatima. CRONOSSTECH CEHP 400 – H-tip ekscentrična preša, kapaciteta 400 tona, dizajnirana je za stabilan rad u velikoserijskoj proizvodnji s naglaskom na zaštitu alata i sigurnost operatera. Monoblok okvir, sustav ovjesa klizača na 8 ležajeva, hidraulička zaštita od preopterećenja i automatsko centralizirano podmazivanje osiguravaju pouzdane performanse u kontinuiranim uvjetima rada. Istaknute prednosti: - Stabilan rad s velikim alatima zahvaljujući radnoj ploči dimenzija 2000×1200 mm - Hidraulička zaštita od preopterećenja za zaštitu alata/opreme - Precizno vođenje pomoću klizača na 8 ležajeva i balansnog klipa - Kontrolirani rad uz PLC i zaslon osjetljiv na dodir, jednostavan za korisnika - Visoka sigurnost operatera zahvaljujući fotoelektričnim zaslonima Područja primjene - Bušenje/rezanje/oblikovanje u aplikacijama koje zahtijevaju veliku radnu ploču - Serijska proizvodnja s automatskim linijama za doziranje materijala - Procesi s teškim alatima i velikim tonama ✅ STANDARDNE ZNAČAJKE • Telo od čelične konstrukcije • Pneumatska spojka/kočnica • Dodatna ploča s T-utorima • Klizač na 8 ležajeva • Podesiv hod na jednoj klipnjači • Balansni klip na klizaču • Automatski sustav za fino podmazivanje • PLC upravljački sustav • Ormar za upravljanje tipa „piano“ • LCD dodirni ekran • Reversibilan motor • Hidraulička zaštita od preopterećenja • Motorizirani sustav podešavanja klizača • Fotoelektrični sigurnosni zastor • Zatvoreni rezervoar za ulje s prijenosnim zupčanicima • Dvospojni sigurnosni ventil • CE usklađenost ✅ OPCIJE • Sistemi za automatsko doziranje materijala (pres feed) • Sistemi za odvoz otpadnog materijala Lodpex N Rzwsfx Ah Deaf • Klizna zaštita na prednjoj strani radne ploče • Alati prema zahtjevu kupca ✅ TEHNIČKE KARAKTERISTIKE (CEHP 400) Kapacitet: 400 tona Razmak stol – klizač: 500 mm Razmak između bokova: 2130 mm Podešavanje klizača: 120 mm Širina preše: 3050 mm Dubina preše: 3200 mm Visina preše: 4700 mm Dimenzije stola: 2000×1200 mm Dimenzije klizača: 2000×1200 mm Hod (fiksni): 200 mm Snaga motora: 55 kW Težina: 51.000 kg ✅ NAPOMENA O PROIZVODNJI/ISPORUCI Ovaj stroj proizvodi CRONOSSTECH u Turskoj. Prodaju, puštanje u pogon i postprodajnu podršku upravlja izravno CRONOSSTECH.

Stanje: novo, Godina proizvodnje: 2025, pritiskna sila: 150 t, hod klipa: 600 mm, širina stola: 1.000 mm, duljina stola: 1.200 mm, sila povlačenja: 50 t, radni tlak: 250 letva, Oprema: dokumentacija / priručnik, sigurnosna svjetlosna zavjesa, CRONOSSTECH CHSP 150/50 H-Type Hydraulic Deep Drawing (Stamping) Press – 8 Guided Slides Lasdpfx Ahox N T U Ho Dsf General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered with a double-acting working principle to provide controlled material flow in sheet metal forming, deep drawing, and stamping applications. Thanks to its H-frame construction with 8 slide guides, it achieves maximum rigidity during the pressing process; parallelism and perpendicularity tolerances are consistently maintained throughout the stroke. The CHSP 150/50 model, featuring a 150-ton main ram and a 50-ton cushion (blankholder) capacity, is designed for precise, repeatable deep drawing operations. The frame construction is stress-relieved by vibration to ensure a long service life and reliable operation. ⚙️ Standard Equipment - Steel construction, H-frame body with 8 slide guides - Stress-relieved frame structure by vibration - Bronze Zr14 slide bearings - WPQR and WPS certificated welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - 7" DELTA touch screen panel - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronically controlled filter contamination warning - On-screen monitoring of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHSP 150/50 Type: Steel construction, H-frame body with 8 slide guides Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 150 Tons Capacity (Cushion): 50 Tons Moving Table Size: 1000 × 1200 mm Fixed Table Size: 1000 × 1200 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Ram Stroke: 600 mm Cushion Stroke: 200 mm Min. Daylight Opening: 100 mm Max. Daylight Opening: 700 mm Stress Relief: By vibration Welding Application: WPQR and WPS approved by TÜRK-AK, EN ISO 15614-1/2017 (Welding operations are supervised by “welding coordination engineers” certified to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 18.5 kW – IE3 Main Pump: 32 cm³ – REXROTH or PARKER Moving Table Fast Descent Speed: 150 mm/s Moving Table Drawing Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Cushion Table Forward Speed: 30 mm/s Main Cylinder Bore: Ø280 mm – Ck45 Cushion Cylinder Bore: Ø160 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approximate Press Height: 3650 mm Approximate Press Width: 2950 mm Approximate Press Depth: 2000 mm Lower Table Height from Floor: 1250 mm Pre-fill Valve: NG 100 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Distance Scale: NOVATECHNIK or TURCK PLC Application: DELTA Touch Screen Panel: DELTA 7" Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 11 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Godina proizvodnje: 2025, pritiskna sila: 250 t, hod klipa: 200 mm, širina stola: 1.100 mm, duljina stola: 2.000 mm, trajanje jamstva: 24 mjeseci, Oprema: sigurnosna svjetlosna zavjesa, Ekscentrična preša je tip mehaničke preše koji koristi snagu generiranu ekscentričnim mehanizmom u operacijama hladnog oblikovanja kao što su probijanje, rezanje i oblikovanje kalupom. H tip (straight-side) ekscentrične preše omogućuju visoku stabilnost i sigurnost procesa zahvaljujući krutoj konstrukciji okvira, posebno pri upotrebi velikih stolova i teških kalupa. CRONOSSTECH CEHP 250 – H Tip Ekscentrična Preša 250 Tona dizajnirana je za stabilan rad u masovnoj proizvodnji, s naglaskom na zaštitu kalupa i sigurnost operatera. S monoblok kućištem, sustavom klizača s 8 ležaja, hidrauličkom zaštitom od preopterećenja i automatskim sustavom podmazivanja, pruža pouzdane performanse za kontinuirane uvjete proizvodnje. Glavne prednosti - Stabilan rad s velikim kalupima zahvaljujući dimenzijama stola 2000×1100 mm - Zaštita kalupa/opreme s hidrauličkom zaštitom od preopterećenja - Precizno vođenje s 8 ležajeva klipa i balansnim klipom Laedpfx Ahjx N Rwre Def - Kontrolirani i korisniku prilagođen rad uz PLC i touch-screen sučelje - Visoka sigurnost operatera zahvaljujući fotozavjesi Područja primjene - Probijanje, rezanje i oblikovanje koji zahtijevaju veliki stol - Serijska proizvodnja s automatskim ulagačima - Proizvodni procesi s teškim kalupima i velikim kapacitetom ✅ STANDARDNA OPREMA • Čelična konstrukcija kućišta • Pneumatska spojka i kočnica • Dodatna T-utorena ploča • Klip s 8 ležajeva • Podešavanje hoda s jednom pogonskom šipkom • Balansni klip • Potpuno automatski sustav finog podmazivanja • PLC sustav upravljanja • Pult piano tipa • LCD touch ekran • Obrnuti hod motora • Hidraulička zaštita od preopterećenja • Motorni sustav za podešavanje klipa • Fotozavjesa • Zatvoreno kućište prijenosnog sklopa u uljnoj kupelji • Dvostruki sigurnosni ventil • Usklađenost s CE normama ✅ OPCIONALNA OPREMA • Sustavi za automatsko ulaganje materijala • Sustav za izbacivanje otpadnog materijala • Klizna sigurnosna vrata ispred stola • Kalup prema specifikaciji kupca ✅ TEHNIČKE SPECIFIKACIJE (CEHP 250) Kapacitet: 250 t Udaljenost stol–klip: 500 mm Unutarnja širina (kućište): 2130 mm Podešavanje klipa: 120 mm Širina preše: 2900 mm Dubina preše: 2650 mm Visina preše: 4600 mm Veličina stola: 2000×1100 mm Veličina klipa: 2000×1100 mm Hod (fiksni): 200 mm Snaga motora: 37 kW Težina: 38,000 kg ✅ NAPOMENA O PROIZVODNJI / ISPORUCI Ovaj stroj proizvodi CRONOSSTECH u Turskoj. Prodaju, puštanje u rad i postprodajne usluge vodi izravno CRONOSSTECH.

Stanje: novo, Godina proizvodnje: 2026, pritiskna sila: 300 t, hod klipa: 60 mm, širina stola: 400 mm, duljina stola: 4.200 mm, podešavanje hoda: 100 mm, trajanje jamstva: 24 mjeseci, Oprema: sigurnosna svjetlosna zavjesa, Ove preše i linije za napajanje, koje smo razvili za sektor dodataka za vrata i prozore i koje imaju mogućnost rada u dvostrukom ili jednostrukom režimu, jamče maksimalnu učinkovitost i dugogodišnji rad. U sektoru dodataka za prozore, gdje je serijska proizvodnja neizbježna, naše preše, zajedno s našim iskustvom, osiguravaju visoku razinu zadovoljstva kupaca. - Pritisna sila do 400 tona - Dužina stola do 6000 mm - Opcije sa 2 ili 3 koljena - Automatsko, kontinuirano povratno fino podmazivanje - Korištenje progresivnog bloka za podmazivanje - Pristup preši sprijeda i straga - Klizna vrata s magnetskim senzorima - Zupčanici kaljeni indukcijom i brušeni Laodpsxrbn Rofx Ah Dof - Prijenos zupčanik-navlaka s konusnim klinom PRITISAK: 300 TONA BRZINA: 40-70 OBR/MIN HOD: 60 MM MAKSIMALNA VISINA ALATA: 340 MM VISINA STOL-KLIN: 400 MM PODEŠAVANJE: 100 MM DIMENZIJE GORNJEG STOLA: 400 X 3000 MM DIMENZIJE DONJEG STOLA: 400 X 4200 MM MOTOR: 22 KW BRZINA MOTORA: 3000 OBR/MIN

Stanje: novo, Godina proizvodnje: 2025, pritiskna sila: 500 t, hod klipa: 1.000 mm, širina stola: 1.200 mm, duljina stola: 1.500 mm, sila povlačenja: 175 t, radni tlak: 250 letva, Oprema: dokumentacija / priručnik, sigurnosna svjetlosna zavjesa, CRONOSSTECH CHSP 500/175 H-Type Hydraulic Deep Drawing (Spinning) Press – 8-Gibbed General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered with a double-action working principle to ensure controlled material flow during sheet metal forming, deep drawing, and spinning applications. Thanks to its 8-gibbed H-frame structure, it provides maximum rigidity during pressing; parallelism and perpendicularity tolerances are stably maintained throughout the full stroke length. The CHSP 500/175 model features a main ram with 500-ton capacity and a blankholder (die cushion) ram with 175-ton capacity, designed for full control over the die and workpiece in high-tonnage deep drawing and spinning operations. The frame construction is stress-relieved by vibration to ensure long life and reliable performance. ⚙️ Standard Equipment - Steel construction, 8-gibbed H-frame press body - Vibration stress-relieved frame structure - Bronze Zr14 gib bearings - WPQR and WPS certified welding, approved by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - 7” DELTA touchscreen panel - Adjustable ram and die cushion stroke control - Adjustable ram and die cushion tonnage (pressure) control - Automatic lubrication system - Electronic filter contamination alert - Oil temperature and hydraulic system status monitoring via display - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHSP 500/175 - Type: Steel construction, 8-gibbed H-frame press body - Frame Material: St52 – ERDEMİR Ljdjx N Uhuopfx Ah Dsaf - Gib Bearing: Bronze Zr14 - Ram Capacity: 500 Ton - Die Cushion Capacity: 175 Ton - Moving Table Size: 1200 × 1500 mm - Fixed Table Size: 1200 × 1500 mm - Parallelism Tolerance: 120 micron/m - Perpendicularity Tolerance: 60 micron/m - Ram Stroke: 1000 mm - Die Cushion Stroke: 350 mm - Min. Daylight: 100 mm - Max. Daylight: 1100 mm - Stress Relief: Vibratory stress relieving - Welding: WPQR and WPS certified and accredited by TÜRK-AK EN ISO 15614-1/2017 (Welding operations are supervised by “welding coordination engineers” certified according to EN ISO 14731) - Max. Working Pressure: 250 Bar - Total Motor Power: 45 kW – IE3 - Main Pump: 70 cm³ – REXROTH or PARKER - Moving Table Fast Down Speed: 150 mm/sec - Moving Table Drawing Speed: 12 mm/sec - Moving Table Return Speed: 170 mm/sec - Die Cushion Forward Speed: 30 mm/sec - Main Cylinder Bore: Ø500 mm – Ck45 - Die Cushion Cylinder Bore: Ø300 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 units - Approx. Overall Height: 5800 mm - Approx. Overall Width: 3250 mm - Approx. Overall Depth: 2200 mm - Table Height from Floor: 1400 mm - Pre-fill Valve: NG 150 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Position Encoder: NOVATECHNIK or TURCK - PLC Application: DELTA - Touchscreen Panel: DELTA 7” - Switchgear Components: SIEMENS – SCHNEIDER - Approximate Weight: 26 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Godina proizvodnje: 2025, pritiskna sila: 2.500 t, hod klipa: 1.000 mm, širina stola: 1.800 mm, duljina stola: 2.600 mm, radni tlak: 250 letva, Oprema: dokumentacija / priručnik, sigurnosna svjetlosna zavjesa, CRONOSSTECH CHP 2500 H-Type Hydraulic Press – 8-Guided Slides General Description The CRONOSSTECH CHP series H-type hydraulic presses are engineered for heavy-duty forming, deep drawing, and metal spinning operations that require extremely high tonnage. The 8-guided slide H-frame construction ensures maximum rigidity throughout the pressing operation; parallelism and perpendicularity tolerances are stably maintained along the full stroke length. The CHP 2500 model, with its large bolster dimensions, multi-cylinder main press configuration, and high-capacity hydraulic system, is specifically designed for automotive, heavy industry, defense industry, and high-tonnage die applications. The machine frame construction is stress-relieved by vibration to ensure long-lasting and reliable operation. ⚙️ Standard Equipment • All-steel construction, 8-slides H-type press frame • Stress-relieved frame by vibration • Zr14 bronze slide bearing bushings • WPQR and WPS certified welds by TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) • Design and manufacturing according to CE standards • PLC-controlled hydraulic system • 7” DELTA touch screen panel • Adjustable ram stroke and tonnage control • Automatic lubrication system • Electronically controlled filter contamination alert • Real-time oil temperature and system status monitoring • Cooling system • Off-line filtration • Operator safety systems • SIEMENS – SCHNEIDER switchgear 📐 Technical Specifications – CHP 2500 Type: Steel construction, 8-guided H-type press frame Frame Material: St52 – ERDEMİR Slide Bearing: Bronze Zr14 Capacity (Ram): 2500 Ton Moving Bolster Size: 1800 × 2600 mm Fixed Bolster Size: 1800 × 2600 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Stroke (Ram): 1000 mm Min. Daylight Opening: 200 mm Max. Daylight Opening: 1200 mm Stress Relief: Vibratory stress relieving Welding: WPQR and WPS certified by TÜRK-AK (EN ISO 15614-1/2017) Max. Operating Pressure: 250 Bar Total Motor Power: 180 kW – IE3 Main Pump: 140 cm³ – REXROTH or PARKER Rapid Descent Speed (Moving Bolster): 150 mm/sec Pressing Speed (Moving Bolster): 12 mm/sec Return Speed (Moving Bolster): 170 mm/sec Main Cylinder Bore: Ø565 mm – Ck45 (4 units) Auxiliary Acceleration Cylinders: 2 units Approx. Press Height: 6500 mm Approx. Press Width: 3950 mm Approx. Press Depth: 2600 mm Bolster Height from Floor: 1500 mm Pre-fill Valve: NG 200 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Sensor: NOVATECHNIK or TURCK PLC: DELTA Touch Panel: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approx. Weight: 120 Tons Production Note Lasdpfex N T S Esx Ah Djf This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Godina proizvodnje: 2025, pritiskna sila: 2.500 t, hod klipa: 1.000 mm, širina stola: 1.800 mm, duljina stola: 2.600 mm, sila povlačenja: 800 t, radni tlak: 250 letva, Oprema: dokumentacija / priručnik, sigurnosna svjetlosna zavjesa, CRONOSSTECH CHSP 2500/800 H-Type Hydraulic Deep Drawing (Forming) Press – 8-Guided Slideways General Description The CRONOSSTECH CHSP series H-type hydraulic forming presses are designed for heavy-duty deep drawing applications that require extremely high tonnage, large table dimensions, and precise blank holder force. The 8-guided H-frame construction provides high rigidity during the pressing process, ensuring parallelism and perpendicularity tolerances are maintained throughout the long stroke for both ram and table movements. The CHSP 2500/800 model delivers maximum stability, controlled material flow, and repeatable production performance for large and deep-draw tooling with its 2500-ton main ram and 800-ton blank holder capacity. The stress-relieved, welded steel construction is specifically designed for long-lasting and reliable performance under severe industrial conditions. ⚙️ Standard Equipment • Welded steel construction, 8-guided H-frame type • Stress-relieved body via vibration technique • Bronze Zr14 slideway bearings • WPQR and WPS certified welding (by TÜRK-AK), in accordance with EN ISO 15614-1:2017 / EN ISO 14731 • PLC-controlled hydraulic system • 7” DELTA touchscreen HMI • Adjustable ram and blank holder stroke control • Adjustable tonnage (pressure) control for ram and blank holder • Automatic lubrication system • Electronic filter contamination warning • On-screen monitoring of hydraulic oil temperature and system status • Off-line filtration and industrial cooling system • SIEMENS – SCHNEIDER electrical components • Heavy-duty industrial safety systems 📐 Technical Specifications – CHSP 2500/800 Type: Welded steel construction, 8-guided H-frame Frame Material: St52 – ERDEMIR Slideway Bearings: Bronze Zr14 Capacity (Ram / Blank Holder): 2500 / 800 Ton Moving / Fixed Table: 1800 × 2600 mm Parallelism / Perpendicularity: 120 / 60 micron/meter Stroke (Ram / Blank Holder): 1000 / 350 mm Daylight Opening (Min / Max): 200 / 1200 mm Max. Working Pressure: 250 Bar Lsdpex N Uk Aefx Ah Doaf Total Motor Power: 180 kW – IE3 Main Pump: 140 cm³ – REXROTH or PARKER Main Cylinder: Ø565 mm – Ck45 (4 units) Blank Holder Cylinder: Ø450 mm – Ck45 (2 units) Pre-Fill Valve: NG 200 PLC / Panel: DELTA / DELTA 7” Approximate Weight: 132 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Godina proizvodnje: 2025, pritiskna sila: 300 t, hod klipa: 800 mm, širina stola: 1.200 mm, duljina stola: 1.500 mm, sila povlačenja: 100 t, radni tlak: 250 letva, Oprema: dokumentacija / priručnik, sigurnosna svjetlosna zavjesa, CRONOSSTECH CHSP 300/100 H-Type Hydraulic Deep Drawing (Spinning) Press – 8 Guideways General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are designed using a double-acting operation principle to ensure controlled material flow during sheet metal forming, deep drawing, and spinning applications. Thanks to the 8-guideway H-frame construction, maximum rigidity is achieved during pressing, and parallelism and squareness tolerances are stably maintained throughout the long stroke. The CHSP 300/100 model, with its 300-ton main ram and 100-ton lower cushion (pot) capacity, is engineered for deep drawing and spinning applications requiring high tonnage. The frame structure is stress-relieved by vibration to ensure long-lasting and reliable operation. ⚙️ Standard Equipment - Steel construction, 8-guideway H-frame press body - Vibration-stress-relieved frame structure - Bronze Zr14 guide bushings - TÜRK-AK accredited, WPQR and WPS certified welding (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in accordance with CE standards - PLC controlled hydraulic system - 7" DELTA touch panel display - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronic filter contamination warning - Real-time display of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHSP 300/100 Type: Steel construction, 8-guideway H-frame press body Frame Material: St52 – ERDEMİR Guideways: Bronze Zr14 Ram Capacity: 300 Ton Cushion Capacity: 100 Ton Moving Table Size: 1200 × 1500 mm Fixed Table Size: 1200 × 1500 mm Parallelism Tolerance: 120 micron/m Squareness Tolerance: 60 micron/m Ram Stroke: 800 mm Cushion Stroke: 300 mm Min. Shut Height: 100 mm Max. Shut Height: 900 mm Weld Stress Relief: By vibration Welding Application: WPQR and WPS certified by TÜRK-AK EN ISO 15614-1/2017 (Welding applications are supervised by "welding coordination engineers" certified to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 37 kW – IE3 Main Pump: 45 cm³ – REXROTH or PARKER Moving Table Fast Down Speed: 150 mm/s Moving Table Drawing Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Cushion Forward Speed: 30 mm/s Main Cylinder Bore: Ø390 mm – Ck45 Cushion Cylinder Bore: Ø230 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approx. Press Height: 4400 mm Approx. Press Width: 3250 mm Approx. Press Depth: 2200 mm Bottom Table Height from Floor: 1350 mm Pre-fill Valve: NG 150 Hydraulic Unit: REXROTH or PARKER Lodpjx N Uhbofx Ah Dsaf Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Scale: NOVATECHNIK or TURCK PLC System: DELTA Touch Panel Display: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approximate Weight: 21 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Godina proizvodnje: 2025, pritiskna sila: 1.500 t, hod klipa: 1.000 mm, širina stola: 1.500 mm, duljina stola: 2.400 mm, radni tlak: 250 letva, Oprema: dokumentacija / priručnik, sigurnosna svjetlosna zavjesa, CRONOSSTECH CHP 1500 H-Type Hydraulic Deep Drawing Press – 8-Guided General Description The CRONOSSTECH CHP series H-type hydraulic deep drawing presses are engineered for deep drawing, forming, and heavy-duty shaping processes that demand high tonnage. The H-frame structure equipped with 8 linear guides ensures maximum rigidity and stability during pressing, enabling precise parallelism and perpendicularity tolerances to be maintained. The CHP 1500 model, featuring large platen dimensions, a robust hydraulic system, and long stroke capacity, provides a reliable solution for the automotive industry, defense sector, heavy metal forming, and industrial production lines. The machine frame is stress-relieved using vibration methods for durability and stable long-term operation. ⚙️ Standard Equipment - Steel construction, 8-guided H-frame press body - Vibration-stress-relieved frame structure - Bronze Zr14 slideway bearings - WPQR and WPS certified welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing compliant with CE standards - PLC-controlled hydraulic system - 7” DELTA touchscreen panel - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning Lasdpfx Asx N T R Ueh Djf - On-screen monitoring of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration system - Safety systems for operator protection - SIEMENS and SCHNEIDER switchgear components 📐 Technical Specifications – CHP 1500 Type: Steel construction, 8-guided H-frame press body Frame Material: St52 – ERDEMİR Slideway Bearings: Bronze Zr14 Capacity (Ram): 1,500 Tons Moving Platen Size: 1,500 × 2,400 mm Fixed Platen Size: 1,500 × 2,400 mm Parallelism Tolerance: 120 microns/meter Perpendicularity Tolerance: 60 microns/meter Stroke (Ram): 1,000 mm Min. Daylight: 200 mm Max. Daylight: 1,200 mm Stress Relief: Vibration method Welding: TÜRK-AK accredited WPQR and WPS certification, EN ISO 15614-1:2017 Max. Working Pressure: 250 Bar Total Motor Power: 90 kW – IE3 Main Pump: 101 cm³ – REXROTH or PARKER Rapid Descent Speed (Movable Platen): 150 mm/sec Drawing Speed (Movable Platen): 12 mm/sec Return Speed (Movable Platen): 170 mm/sec Main Cylinder Inside Diameter: Ø620 mm – Ck45 (2 units) Auxiliary Speed-Up Cylinders: 2 units Approx. Height: 6,250 mm Approx. Width: 3,750 mm Approx. Depth: 2,500 mm Lower Platen Height from Floor: 1,500 mm Primary Filling Valve: NG 200 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Measuring Scale: NOVATECHNIK or TURCK PLC: DELTA Touchscreen Panel: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approx. Weight: 70 Tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Stanje: novo, Godina proizvodnje: 2022, Konzolni regal NOVI PROIZVOD Podaci: - V: cca 300 cm - D: cca 137 cm - D: cca 402 cm - Konzolni krakovi: cca 120 cm - Mjera osi: 131 cm - NOVA ROBA odmah sa lagera. - 500 kg opterećenja po ruci - 2250 kg nosivosti po postolju - Vruće pocinčano postolje. - Konzolni krakovi vruće pocinčani. - Ruke su zavrnute. - Ruke podesive u koracima od 100 mm. - Razine: stopalo + 3 razine za pohranu (4 razine za pohranu) Polica se sastoji od: - 04 x postolja, uključujući postolje od cca 300 cm od IPE160. - 12 x konzolne ruke cca 120 cm od IPE 80 - uključujući sve potrebne spojne elemente i vijke. Zašto BLT konzolni regali? - Certificirani njemački proizvođač DIN EN 1090 - Proizvedeno u Njemačkoj - Sve navedene nosivosti postolja za police i konzolnih krakova mogu se statički provjeriti pri 100% opterećenja. - Svi regalni sustavi isporučuju se u vruće pocinčanoj izvedbi. Stoga se mogu postaviti iznutra ili izvana i ne hrđaju poput obojanih sustava. Dosljedan izgled dugi niz godina. - Koristimo zakonski propisane vruće pocinčane setove vijaka prema DIN EN 15048-1 - Duga garancija nakon prodaje - Baza postolja i stražnja strana postolja zavareni su zajedno, što pruža dodatnu sigurnost i kratko vrijeme montaže jer se noge ne moraju pričvrstiti vijcima na stražnju stranu postolja. - Zavoji izrađeni od kutnog čelika, tako da nije potrebno podešavanje pomoću zatezača. Time se skraćuje vrijeme sastavljanja. - Nema sustava utora, stoga nema slabljenja profila stalka. Cijena: 2265,00 € neto + zakonski primjenjivi PDV. Primit ćete račun s prikazanim PDV-om. Prijevoz: Dostavu može izvršiti naš otpremni partner na zahtjev; troškovi ovise o poštanskom broju. Skupština: Po potrebi naše educirano osoblje rado će Vam pomoći u profesionalnoj montaži i demontaži Vaše poslovne opreme. Laedjzuxypepfx Ah Def Naša preporuka: Recite nam svoje potrebe... Rado ćemo vam pomoći u realizaciji vaših projekata, od planiranja preko narudžbe do montaže.

Stanje: novo, Godina proizvodnje: 2022, Konzolni regal NOVI PROIZVOD Podaci: - V: cca 400 cm - D: cca 137 cm - D: cca 402 cm - Konzolni krakovi: cca 120 cm - Mjera osi: 131 cm - NOVA ROBA odmah sa lagera. - 500 kg opterećenja po ruci - 2250 kg nosivosti po postolju - Vruće pocinčano postolje. - Konzolni krakovi vruće pocinčani. - Ruke su zavrnute. - Ruke podesive u koracima od 200 mm. - Razine: stopa + 3 razine za pohranu (4 razine za pohranu) Polica se sastoji od: - 04 x postolja, uključujući bazu cca 400 cm od IPE160. - 12 x konzolne ruke cca 120 cm od IPE 80 - uključujući sve potrebne spojne elemente i vijke. Zašto BLT konzolni regali? - Certificirani njemački proizvođač DIN EN 1090 - Proizvedeno u Njemačkoj - Sve navedene nosivosti postolja za police i konzolnih krakova mogu se statički provjeriti pri 100% opterećenja. - Svi regalni sustavi isporučuju se u vruće pocinčanoj izvedbi. Stoga se mogu postaviti iznutra ili izvana i ne hrđaju poput obojanih sustava. Dosljedan izgled dugi niz godina. - Koristimo zakonski propisane vruće pocinčane setove vijaka prema DIN EN 15048-1 - Duga garancija nakon prodaje - Baza postolja i stražnja strana postolja zavareni su zajedno, što pruža dodatnu sigurnost i kratko vrijeme montaže jer se noge ne moraju pričvrstiti vijcima na stražnju stranu postolja. - Zavoji izrađeni od kutnog čelika, tako da nije potrebno podešavanje pomoću zatezača. Time se skraćuje vrijeme sastavljanja. - Nema sustava utora, stoga nema slabljenja profila stalka. Cijena: 2462,00 € neto + zakonski primjenjivi PDV. Primit ćete račun s prikazanim PDV-om. Lajdpfxjzuxxxs Ah Dsf Prijevoz: Dostavu može izvršiti naš otpremni partner na zahtjev; troškovi ovise o poštanskom broju. Skupština: Po potrebi naše educirano osoblje rado će Vam pomoći u profesionalnoj montaži i demontaži Vaše poslovne opreme. Naša preporuka: Recite nam svoje potrebe... Rado ćemo vam pomoći u realizaciji vaših projekata, od planiranja preko narudžbe do montaže.

Stanje: vrlo dobro (rabljeno), Godina proizvodnje: 1978, radni sati: 5.000 h, Funkcionalnost: potpuno funkcionalan, broj stroja/vozila: 24, ukupna masa: 140.000 kg, Čekić za kovanje na vruće 5 t Kramatorsk tip M2147 Nazivna masa udarnih dijelova: 5000 kg Stvarna masa udarnih dijelova bez gornje matrice: 5080 kg Energija udarca: 12.500 kgm /125 kJ/ Maks. broj udaraca u minuti: 50 Hod klipa: 1300 mm Min. udaljenost klip – držač matrice: 400 mm Udaljenost između stupova: 800 mm Duljina matrice: 950 mm Duljina držača matrice: 1180 mm Dimenzije (D x Š x V): 3000 x 2000 x 6470 mm Težina donjeg nakovnja: 23 t Težina gornjeg nakovnja: 77 t Ukupna težina: 140 t + Preša za obrezivanje Voronež tip K9538 Ledpfxslnlq Ds Ah Dsaf Kapacitet, t: 630 Hod: 400 mm Veličina stola (lijevo-desno): 1250 mm Veličina stola (sprijeda-natrag): 1250 mm Podešavanje klipa: 180 mm Broj hodova: 20/15 min⁻¹ Visina zatvaranja: 750 mm Gornji izbacivač: snaga 20 t, hod 125 mm Pogonska snaga 32 kW Ukupna instalirana snaga: 58 kW Potrebni prostor: 3280 x 3470 mm Visina stroja iznad poda: 6190 mm Ukupna težina: 53 t

Stanje: novo, Funkcionalnost: potpuno funkcionalan, boja: drugo, Godina proizvodnje: 2026, Stacionarne postrojenja za drobljenje kamena marke CONSTMACH dizajnirana su s naglaskom na visoku učinkovitost i izdržljivost, nudeći dugotrajnija industrijska rješenja. Svako postrojenje posebno je konfigurirano prema tvrdoći i abrazivnosti materijala koji se drobi te željenoj veličini proizvoda. Sa kapacitetima proizvodnje od 50 t/h do 1.000 t/h, potpuno su prilagodljiva projektima različitih razmjera. Tipovi drobilica koji se koriste u postrojenjima biraju se sukladno svojstvima materijala, kako bi se postigle maksimalne performanse. Naš projektni tim izrađuje optimizirane 3D planove rasporeda korištenjem komponenti poput dozatora, drobilica, sita, bunkera, perača i transportnih traka. To osigurava velik kapacitet, nisku potrošnju energije i minimalne troškove održavanja tijekom proizvodnog procesa. Svako postrojenje je projektirano po mjeri, uzimajući u obzir investicijski budžet i uvjete rada. Naš inženjerski tim nudi najprikladnija rješenja i prijedloge kako bi se izbjegli nepotrebni troškovi. Stacionarna postrojenja za drobljenje i sijanje kamena marke CONSTMACH opremljena su visokokvalitetnim elektroničkim komponentama SIEMENS i SCHNEIDER te omogućuju minimalnu intervenciju operatera zahvaljujući potpuno automatiziranom PLC sustavu. Ovo osigurava sigurnu, brzu i stabilnu proizvodnju. Tehničke karakteristike fiksnog postrojenja za drobljenje kamena: Lasdpfx Aoxqhy Rjh Dsf Kapacitet proizvodnje: 50 – 1.000 t/h Vrsta materijala za drobljenje: Ovisno o željenoj vrsti proizvoda Dimenzije gotovog proizvoda: Podesive na zahtjev Tipovi drobilica: Čeljusne, udarne, stožaste ili drobilice s okomitom osovinom Zašto odabrati fiksno postrojenje za drobljenje kamena CONSTMACH? CONSTMACH se ističe inženjerskim pristupom koji donosi prilagođena rješenja svakom kupcu. Naša postrojenja postižu dugogodišnji kontinuirani rad zahvaljujući kvalitetnim komponentama, energetski učinkovitim dizajnima i pouzdanim automatiziranim sustavima. Uz našu podršku nakon isporuke i naglasak na zadovoljstvu korisnika, pratimo vas u svakoj fazi vaše investicije. CONSTMACH je pravi izbor za stacionarna postrojenja za drobljenje kamena koja nude snažne performanse, niske operativne troškove i maksimalnu učinkovitost. Čime se bavimo u Constmachu? Constmach je vodeći proizvođač strojeva koji nudi širok asortiman proizvoda prilagođen potrebi građevinske i rudarske industrije. Naš portfelj uključuje strojeve za izradu betonskih blokova, stacionarna i mobilna betonska postrojenja, drobilice kamena, postrojenja za drobljenje i sijanje kamena, strojeve za pranje pijeska, strojeve za proizvodnju pijeska, asfaltske baze, transportne trake, čeljusne drobilice i mobilna postrojenja za drobljenje. Zahvaljujući visokim standardima kvalitete, inovativnom pristupu proizvodnji i rješenjima usmjerenim na korisnike, Constmach se izdvaja kao pouzdan brend na domaćem i inozemnom tržištu. Naši proizvodi su prvi izbor stručnjaka iz industrije zbog svoje izdržljivosti, učinkovitosti i dugotrajnog rada.

Stanje: novo, Godina proizvodnje: 2025, pritiskna sila: 1.000 t, hod klipa: 1.000 mm, širina stola: 1.500 mm, duljina stola: 2.000 mm, radni tlak: 250 letva, Oprema: dokumentacija / priručnik, sigurnosna svjetlosna zavjesa, CRONOSSTECH CHP 1000 H-Type Single-Acting Hydraulic Press – 8-Guided General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are designed for high-tonnage sheet metal forming, deep drawing, straightening, and heavy-duty pressing applications. The 8-guided H-frame structure evenly distributes the high forces generated during pressing, providing maximum rigidity, precision, and long-lasting service life. The CHP 1000 model is developed to deliver reliable and stable performance for heavy industrial production lines. CHP Series – Structural Features CHP series presses are engineered with the conditions of heavy industry in mind. The body and main carrier structures are stress-relieved by vibration. Thanks to the Bronze Zr14 guide bushings, smooth load distribution and high precision are achieved throughout the ram travel. ⚙️ Standard Equipment - Steel construction H-type press frame with 8 guides - Stress-relieved frame via vibration - Bronze Zr14 guide bushings - WPQR & WPS certified welding applications with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacture in accordance with CE standards - PLC-controlled hydraulic system - 7” DELTA touchscreen panel - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - On-screen monitoring of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Two-hand control system - Light barrier (standard for operator safety) - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 1000 Type: Steel construction, 8-guided H-frame press Frame Material: St52 – ERDEMIR Guide Bushings: Bronze Zr14 Capacity (Ram): 1000 Tons Movable Table Dimensions: 1500 × 2000 mm Fixed Table Dimensions: 1500 × 2000 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 1000 mm Min. Daylight: 100 mm Max. Daylight: 1100 mm Stress Relief: Vibration stress relieving Welding Application: WPQR and WPS certified by TÜRK-AK, in accordance with EN ISO 15614-1/2017 Max. Working Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Movable Table Rapid Down Speed: 150 mm/s Movable Table Pressing Speed: 12 mm/s Movable Table Return Speed: 170 mm/s Main Cylinder Inner Diameter: Ø500 mm – Ck45 (2 units) Lajdpox N T Rbjfx Ah Dof Auxiliary Acceleration Cylinders: 2 units Approximate Press Height: 6000 mm Approximate Press Width: 3450 mm Approximate Press Depth: 2400 mm Table Height from Floor: 1450 mm Pre-fill Valve: NG 200 Hydraulic Power Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Transducer: NOVATECHNIK or TURCK PLC Application: DELTA Touchscreen Panel: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 55 tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Godina proizvodnje: 2025, pritiskna sila: 1.200 t, hod klipa: 1.000 mm, širina stola: 1.500 mm, duljina stola: 2.000 mm, radni tlak: 250 letva, Oprema: dokumentacija / priručnik, sigurnosna svjetlosna zavjesa, CRONOSSTECH CHP 1200 H-Type Hydraulic Drawing Press – 8-Guided General Description The CRONOSSTECH CHP series H-type hydraulic drawing presses are specially designed for deep drawing, forming, shaping, and heavy-duty pressing applications. The 8-guided H-frame construction provides maximum rigidity, stability, and precision under high tonnage. The CHP 1200 model offers reliable and long-lasting performance for industrial production lines requiring high force. The frame is stress-relieved by vibration methods, ensuring balanced distribution of loads during pressing while maintaining parallelism and perpendicularity tolerances. ⚙️ Standard Equipment Steel construction, 8-guided H-frame press design Vibration stress-relieved frame structure Bronze Zr14 slide bearings WPQR and WPS certified welding applications with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) Design and manufacturing complying with CE standards PLC-controlled hydraulic system Touch panel display (DELTA 7”) Adjustable ram stroke and tonnage control Automatic lubrication system Electronic filter contamination warning On-screen monitoring of hydraulic unit oil temperature and system status Cooling system Off-line filtration Safety systems for operator protection SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHP 1200 Type: Steel construction, 8-guided H-frame press design Frame Material: St52 – ERDEMİR Slide Bearing: Bronze Zr14 Capacity (Ram): 1200 Ton Movable Table Size: 1500 × 2000 mm Fixed Table Size: 1500 × 2000 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Ram Stroke: 1000 mm Min. Daylight: 100 mm Max. Daylight: 1100 mm Weld Stress Relief: Vibratory stress relief Welding Application: WPQR and WPS certified according to EN ISO 15614-1:2017, accredited by TÜRK-AK Max. Working Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Movable Table Rapid Descent: 150 mm/sec Movable Table Drawing Speed: 12 mm/sec Movable Table Return Speed: 170 mm/sec Main Cylinder Bore: Ø560 mm – Ck45 (2 units) Auxiliary Acceleration Cylinders: 2 units Approx. Height of the Press: 6100 mm Approx. Width of the Press: 3550 mm Approx. Depth of the Press: 2400 mm Lower Table Height from Floor: 1450 mm Pre-fill Valve: NG 200 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Sensor: NOVATECHNIK or TURCK PLC System: DELTA Touch Panel Display: DELTA 7” Electrical Components: SIEMENS – SCHNEIDER Approx. Weight: 60 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey. Lajdpfsx N T Rusx Ah Dof

Stanje: novo, Godina proizvodnje: 2025, pritiskna sila: 100 t, hod klipa: 600 mm, širina stola: 1.000 mm, duljina stola: 1.200 mm, sila povlačenja: 40 t, radni tlak: 250 letva, Oprema: dokumentacija / priručnik, sigurnosna svjetlosna zavjesa, CRONOSSTECH CHSP 100/40 H-Type Hydraulic Deep Drawing (Flanging) Press – 8-Guided Slides General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are designed with a double-acting operating principle to provide controlled material flow during sheet metal forming, deep drawing, and flanging applications. The 8-guided slide H-frame structure ensures maximum rigidity throughout the pressing process; parallelism and perpendicularity tolerances are maintained consistently along the stroke. The CHSP 100/40 model is designed for precise deep drawing and flanging operations, offering a 100-ton main ram and a 40-ton blankholder ram (cushion) capacity. The frame structure is stress-relieved via vibration method to ensure long-lasting and reliable operation. ⚙️ Standard Equipment - Steel construction, 8-guided slide H-frame press body - Stress-relieved frame structure (vibration method) - Bronze Zr14 slide guide bearings - Welding applications certified by TÜRK-AK accredited WPQR and WPS (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in accordance with CE standards - PLC-controlled hydraulic system - 7” DELTA touch panel display - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronically monitored filter contamination warning - On-screen monitoring of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHSP 100/40 Type: Steel construction, 8-guided slide H-frame press body Frame Material: St52 – ERDEMİR Slide Guide Bearings: Bronze Zr14 Capacity (Ram): 100 tons Capacity (Cushion): 40 tons Moving Table Dimensions: 1000 × 1200 mm Fixed Table Dimensions: 1000 × 1200 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Ram Stroke: 600 mm Cushion Stroke: 200 mm Minimum Shut Height: 100 mm Maximum Shut Height: 700 mm Weld Stress Relief: Vibration method Laedpfjx N T Uyox Ah Djf Weld Application: WPQR and WPS certified by TÜRK-AK according to EN ISO 15614-1/2017 (supervised by certified welding coordination engineers as per EN ISO 14731) Max. Operating Pressure: 250 Bar Total Motor Power: 11 kW – IE3 Main Pump: 22 cm³ – REXROTH or PARKER Moving Table Fast Down Speed: 150 mm/s Moving Table Drawing Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Cushion Forward Speed: 30 mm/s Main Cylinder Bore: Ø230 mm – Ck45 Cushion Cylinder Bore: Ø140 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approx. Press Height: 3400 mm Approx. Press Width: 2950 mm Approx. Press Depth: 2000 mm Lower Table Height From Floor: 1250 mm Pre-fill Valve: NG 100 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Transducer: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel Display: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 9 tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Godina proizvodnje: 2025, pritiskna sila: 400 t, hod klipa: 1.000 mm, širina stola: 1.200 mm, duljina stola: 1.500 mm, sila povlačenja: 150 t, radni tlak: 250 letva, Oprema: dokumentacija / priručnik, sigurnosna svjetlosna zavjesa, CRONOSSTECH CHSP 400/150 H-Type Hydraulic Deep Drawing (Spinning) Press – 8-Gibbed General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered with a double-acting working principle to ensure controlled material flow in sheet metal forming, deep drawing, and spinning applications. The 8-gibbed H-frame design delivers maximum rigidity during the pressing operation; parallelism and squareness tolerances are stably maintained throughout the entire stroke length. The CHSP 400/150 model, equipped with a 400-ton main ram and a 150-ton cushion (blankholder), is designed for high-tonnage deep drawing and spinning applications. The frame construction is stress-relieved by vibration for long-lasting, reliable operation. Lajdox N Uhhopfx Ah Dof ⚙️ Standard Equipment - Steel-construction, 8-gibbed H-press frame design - Stress-relieved frame via vibration - Bronze Zr14 gib bushings - WPQR and WPS certified welding applications with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronically monitored filter contamination warning - Display of hydraulic unit oil temperature and system status on screen - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHSP 400/150 Type: Steel-construction, 8-gibbed H-press frame grame Material: St52 – ERDEMIR Gib Bushing: Bronze Zr14 Capacity (Ram): 400 Ton Capacity (Cushion): 150 Ton Moving Table Size: 1200 × 1500 mm Fixed Table Size: 1200 × 1500 mm Parallelism Tolerance: 120 micron/meter Squareness Tolerance: 60 micron/meter Stroke (Ram): 1000 mm Stroke (Cushion): 350 mm Min. Daylight: 100 mm Max. Daylight: 1100 mm Stress Relieving: Vibration stress relief Welding Application: WPQR and WPS certified by TÜRK-AK EN ISO 15614-1/2017 (Supervised by "welding coordination engineers" certified according to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 37 kW – IE3 Main Pump: 45 cm³ – REXROTH or PARKER Moving Table Fast Down Speed: 150 mm/s Moving Table Drawing Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Cushion Table Forward Speed: 30 mm/s Main Cylinder Bore: Ø450 mm – Ck45 Cushion Cylinder Bore: Ø280 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approx. Machine Height: 5600 mm Approx. Machine Width: 3250 mm Approx. Machine Depth: 2200 mm Table Height from Floor: 1400 mm Pre-fill Valve: NG 150 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Scale: NOVATECHNIK or TURCK PLC: DELTA Touch Panel Display: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approx. Weight: 24 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Godina proizvodnje: 2026, pritiskna sila: 200 t, hod klipa: 60 mm, širina stola: 400 mm, duljina stola: 4.200 mm, podešavanje hoda: 60 mm, trajanje jamstva: 24 mjeseci, Oprema: sigurnosna svjetlosna zavjesa, Naši preše i linije za hranjenje, razvijene za industriju okova za vrata i prozore s mogućnošću rada u jednostrukom i dvostrukom načinu, jamče maksimalnu učinkovitost i dugotrajan rad. U sektoru okova za prozore, gdje je masovna proizvodnja neizbježna, osiguravamo maksimalno zadovoljstvo kupaca zahvaljujući našim prešama i stručnosti koju donosimo. - Tlačna sila do 400 tona - Duljina stola do 6000 mm - Opcije s 2 ili 3 klipne poluge - Automatsko stalno precizno podmazivanje - Upotreba progresivnog bloka za podmazivanje - Pristup preši sprijeda i straga Laodpfx Ahjxrbmyo Djf - Klizna vrata s magnetskim senzorima - Zupčanici kaljeni indukcijom i brušeni - Spojevi zupčanika i glavčine izvedeni konusnim klinom PRITISAK: 200 TONA BROJ OKRETAJA: 40–70 OKR/MIN HOD: 60 MM MAKS. VISINA ALATA: 340 MM VISINA STOLA-KLIPE: 400 MM PODESIVOST: 100 MM DIMENZIJE GORNJEG STOLA: 400X3000 MM DIMENZIJE DONJEG STOLA: 400X4200 MM MOTOR: 18,5 KW BROJ OKRETAJA MOTORA: 3000 OKR/MIN

Stanje: novo, Godina proizvodnje: 2025, pritiskna sila: 100 t, hod klipa: 500 mm, širina stola: 800 mm, duljina stola: 1.000 mm, radni tlak: 250 letva, Oprema: dokumentacija / priručnik, sigurnosna svjetlosna zavjesa, CRONOSSTECH CHP 100 H-Type Single-Acting Hydraulic Press – 8 Guideways General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are industrial presses designed for sheet metal forming, straightening, assembly, and die pressing applications, featuring a rigid steel frame. Thanks to its 8-guideway H-frame structure, it offers high stability and repeatable precision during pressing. CHP Series – Structural Features CHP series presses are engineered for heavy-duty applications. The frame and supporting components are stress-relieved by vibration. The bronze Zr14 material used in the slide bearings ensures long-lasting and stable operation. Key Advantages - 8-guideway H-frame design - Vibration stress-relieved steel structure - Welding operations in compliance with ISO standards - PLC-controlled operation with touchscreen interface - Design focused on operator safety and process stability ⚙️ Standard Equipment - Steel construction, 8-guideway H-type press frame - Vibration stress-relieved frame and support components - Bronze Zr14 slide bearings - WPQR & WPS approved welding (TÜRK-AK accredited), compliant with EN ISO 15614-1:2017 / EN ISO 14731 - Machine designed and manufactured in accordance with CE regulations - PLC-controlled hydraulic system - Touchscreen panel (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically monitored filter contamination warning - Hydraulic unit oil temperature and system status monitoring on-screen - Cooling system and off-line filtration - Two-hand control system - Light barrier (operator safety standard) - SIEMENS – SCHNEIDER switchgear 📐 Technical Specifications – CHP 100 Type: Steel construction, 8-guideway H-frame Frame Material: St52 – ERDEMİR Slide Bearing Material: Zr14 Bronze Capacity (Ram): 100 Ton Movable Table Dimensions: 800 × 1000 mm Fixed Table Dimensions: 800 × 1000 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 500 mm Min. Daylight: 100 mm Max. Daylight: 600 mm Weld Stress Relief: Vibratory stress relief Welding Certification: WPQR and WPS approved by TÜRK-AK, with EN ISO 15614-1/2017 certificate, supervised by welding coordination engineers certified per EN ISO 14731 Ledpfsx N Tx Sox Ah Djaf Max. Working Pressure: 250 Bar Total Motor Power: 11 kW – IE3 Main Pump: 22 cm³ – REXROTH or PARKER Movable Table Fast Approach Speed: 150 mm/s Movable Table Pressing Speed: 12 mm/s Movable Table Return Speed: 170 mm/s Main Cylinder Bore: Ø230 mm – Ck45 Auxiliary Acceleration Cylinders: 2 pcs Approx. Height of Press: 3400 mm Approx. Width of Press: 2950 mm Approx. Depth of Press: 2000 mm Lower Table Height from Floor: 1250 mm Pre-fill Valve: NG 100 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Distance Encoder: NOVATECHNIK or TURCK PLC: DELTA Touchscreen Panel: DELTA 7" Switchgear: SIEMENS – SCHNEIDER Approx. Weight: 6.5 Ton Manufacturing Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Godina proizvodnje: 2025, pritiskna sila: 400 t, hod klipa: 60 mm, širina stola: 400 mm, duljina stola: 4.500 mm, podešavanje hoda: 100 mm, trajanje jamstva: 24 mjeseci, Oprema: sigurnosna svjetlosna zavjesa, Naše preše i sustavi za automatsko doziranje, koje mogu raditi pojedinačno i u duplom režimu, proizvedene su za sektor dodatne opreme za vrata i prozore te jamče maksimalnu učinkovitost i dugogodišnji rad. U industriji prozorskih dodataka, gdje je masovna proizvodnja neizbježna, preše u kombinaciji s našim iskustvom osiguravaju maksimalno zadovoljstvo kupaca. - Pritisna snaga do 400 tona Laedpfsxrbpnjx Ah Def - Duljina stola do 6000 mm - Opcije s 2 ili 3 ekscentrične poluge - Automatsko kontinuirano fino podmazivanje - Korištenje progresivnih blokova za podmazivanje - Pristup preši s prednje i stražnje strane - Klizna vrata s magnetskim senzorima - Indukcijski kaljeni i brušeni zupčanici - Spojevi zupčanika i nabe s koničnim bravama PREŠA : 400 TONA BROJ OKRETAJA : 40-70 OKR/MIN HOD : 60 MM MAKS. VISINA ALATA : 340 MM VISINA STOLA-KOCA : 400 MM REGLAŽA : 100 MM GORNJA PLOČA : 500X4500 MM DONJA PLOČA : 400X4500 MM MOTOR : 30 KW BROJ OKR. MOTORA : 3000 OKR/MIN

Stanje: novo, Godina proizvodnje: 2025, pritiskna sila: 150 t, hod klipa: 500 mm, širina stola: 800 mm, duljina stola: 1.000 mm, radni tlak: 250 letva, Oprema: dokumentacija / priručnik, sigurnosna svjetlosna zavjesa, CRONOSSTECH CHP 150 H-Type Single-Acting Hydraulic Press – 8 Guide Rails General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are industrial presses with a rigid steel construction, specially designed for sheet metal forming, straightening, assembly, and die pressing applications. Thanks to its H-frame structure with 8 guide rails, it ensures stable, balanced, and repeatable operation during pressing. The CHP 150 model has been developed for medium-duty applications, aiming for reliable performance and long service life. CHP Series – Structural Features CHP series presses are engineered considering heavy-duty operating conditions. The frame and bearing components are stress-relieved by vibration. Bronze Zr14 guide bushings offer smooth load transfer and long-term stable operation. ⚙️ Standard Equipment - Steel construction, H-type press frame with 8 guide rails - Stress-relieved frame and carrier parts via vibration - Bronze Zr14 guide bushings - WPQR & WPS certified welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Machine structure designed and manufactured in compliance with CE standards - PLC controlled hydraulic system - 7” DELTA touchscreen panel - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically monitored filter contamination warning - On-screen monitoring of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Two-hand control system - Light curtain (standard for operator safety) Lajdpfx Ahex N T Dzs Dof - SIEMENS – SCHNEIDER switching components 📐 Technical Specifications – CHP 150 Type: Steel construction, H-type press body with 8 guide rails Frame Material: St52 – ERDEMİR Guide Bushings: Bronze Zr14 Capacity (Ram): 150 Tons Moving Table Dimensions: 800 × 1000 mm Fixed Table Dimensions: 800 × 1000 mm Parallelism Tolerance: 120 micron/meter Squareness Tolerance: 60 micron/meter Ram Stroke: 500 mm Min. Daylight: 100 mm Max. Daylight: 600 mm Stress Relief: Vibration stress relief Welding Application: Welding application certified under WPQR & WPS, accredited by TÜRK-AK, with EN ISO 15614-1/2017 certification (Supervised by certified welding coordination engineers according to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 18.5 kW – IE3 Main Pump: 32 cm³ – REXROTH or PARKER Moving Table Fast Descent Speed: 150 mm/s Moving Table Drawing Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Main Cylinder Bore: Ø280 mm – Ck45 Approximate Press Height: 3650 mm Approximate Press Width: 2950 mm Approximate Press Depth: 2000 mm Bottom Table Height from Floor: 1250 mm Main Pre-fill Valve: NG 100 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Sensor: NOVATECHNIK or TURCK PLC Application: DELTA Touchscreen Display: DELTA 7” Switching Components: SIEMENS – SCHNEIDER Approximate Weight: 7 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stanje: novo, Godina proizvodnje: 2025, pritiskna sila: 400 t, hod klipa: 800 mm, širina stola: 1.200 mm, duljina stola: 1.500 mm, radni tlak: 250 letva, Oprema: dokumentacija / priručnik, sigurnosna svjetlosna zavjesa, CRONOSSTECH CHP 400 H-Type Single Acting Hydraulic Press – 8 Guideways General Description The CRONOSSTECH CHP series H-type single acting hydraulic presses are high-rigidity industrial press solutions developed for sheet metal forming, straightening, assembly, and die pressing applications. Thanks to the 8-guideway H-frame design, high loads generated during pressing are distributed evenly to ensure stable and repeatable operation. The CHP 400 model is engineered for heavy-duty operations requiring high tonnage, offering long-lasting and reliable performance. CHP Series – Structural Features CHP series presses are designed with heavy-duty conditions in mind. The frame and carrier components are stress-relieved by vibration. The bronze Zr14 guide bushings contribute to the long-term retention of precision by ensuring even load distribution during ram movement. ⚙️ Standard Equipment - Steel construction, H-type press frame with 8 guideways - Vibration stress-relieved frame and carrier components - Bronze Zr14 guide bushing Lajdox N T Hpspfx Ah Dof - WPQR & WPS approved welding by TÜRK-AK accredited applications (EN ISO 15614-1:2017 / EN ISO 14731) - Machine structure designed and manufactured in compliance with CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - On-screen monitoring of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Two-hand control system - Light curtain (standard for operator safety) - SIEMENS – SCHNEIDER switching components 📐 Technical Specifications – CHP 400 - Type: Steel construction, H-frame with 8 guideways - Frame Material: St52 – ERDEMİR - Slide Bushing: Bronze Zr14 - Capacity (Ram): 400 tons - Movable Table Size: 1200 × 1500 mm - Fixed Table Size: 1200 × 1500 mm - Parallelism Tolerance: 120 microns/meter - Squareness Tolerance: 60 microns/meter - Stroke (Ram): 800 mm - Min. Daylight: 100 mm - Max. Daylight: 900 mm - Weld Stress Relieving: Vibration stress relieving - Welding: WPQR and WPS approved by TÜRK-AK accredited to EN ISO 15614-1:2017 (inspected by certified welding coordination engineers per EN ISO 14731) - Max. Working Pressure: 250 Bar - Total Motor Power: 37 kW – IE3 - Main Pump: 45 cm³ – REXROTH or PARKER - Movable Table Fast Approach Speed: 150 mm/sec - Movable Table Pressing Speed: 12 mm/sec - Movable Table Return Speed: 170 mm/sec - Main Cylinder Internal Diameter: Ø450 mm – Ck45 - Auxiliary Fast Advance Cylinders: 2 units - Approx. Press Height: 5600 mm - Approx. Press Width: 3250 mm - Approx. Press Depth: 2200 mm - Height of Lower Table from Floor: 1400 mm - Pre-fill Valve: NG 150 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Displacement Scale: NOVATECHNIK or TURCK - PLC Control: DELTA - Touch Panel Display: DELTA 7” - Switching Components: SIEMENS – SCHNEIDER - Approximate Weight: 19.5 tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.